References
- ASTM F3067 - 14. 2015. Guide for radial loading of balloon expandable and self expanding vascular stents. 1–19.
- Bedoya J, Meyer CA, Timmins LH, Moreno MR, Moore JE. 2006. Effects of stent design parameters on normal artery wall mechanics. J Biomech Eng. 128(5):757–765.
- Chua SD, Mac Donald BJ, Hashmi MS. 2003. Finite element simulation of stent and balloon interaction. J Mater Process Technol. 143-144:591–597.
- Cui FS, Lee HP, Lu C, Chai P. 2010. Effects of balloon length and compliance on vascular stent expansion. Int. J. Appl. Mech. 02(03):681–697.
- Donachie M. 1998. Biomedical alloys. Adv Mater Process. 7:63–65.
- Dumoulin C, Cochelin B. 2000. Mechanical behaviour modelling of balloon-expandable stents. J Biomech. 33(11):1461–1470.
- Gervaso F, Capelli C, Petrini L, Lattanzio S, Di Virgilio L, Migliavacca F. 2008. On the effects of different strategies in modelling balloon-expandable stenting by means of finite element method. J Biomech. 41(6):1206–1212.
- Grogan JA, Leen SB, McHugh PE. 2012. Comparing coronary stent material performance on a common geometric platform through simulated bench testing. J Mech Behav Biomed Mater. 12:129–138.
- Ikari Y, Kazuhiro H, Tamura T, Saeki F, Yamaguchi T. 1995. Luminal loss and site of restenosis after Palmaz-Schatz coronary stent implantation. Am J Cardiol. 76(3) :117–120.
- Kereiakes DJ, Cox DA, Hermiller JB, Midei MG, Bachinsky WB, Nukta ED, Leon MB, Fink S, Marin L, Lansky AJ, Guidant Multi-Link Vision Stent Registry Investigators. 2003. Usefulness of a cobalt chromium coronary stent alloy. Am J Cardiol. 92(4):463–466.
- Liang DK, Yang DZ, Qi M, Wang WQ. 2005. Finite element analysis of the implantation of a balloon-expandable stent in a stenosed artery. Int J Cardiol. 104(3):314–318.
- Lim D, Cho SK, Park WP, Kristensson A, Ko JY, Al-Hassani ST, Kim HS. 2008. Suggestion of potential stent design parameters to reduce restenosis risk driven by foreshortening or dogboning due to non-uniform balloon-stent expansion. Ann Biomed Eng. 36(7):1118–1129.
- Mani G, Feldman MD, Patel D, Agrawal CM. 2007. Coronary stents: a materials perspective. Biomaterials. 28(9):1689–1710.
- Martin D, Boyle F. 2013. Finite element analysis of balloon-expandable coronary stent deployment: influence of angioplasty balloon configuration . Int J Numer Method Biomed Eng. 29(11):1161–1175.
- Migliavacca F, Petrini L, Colombo M, Auricchio F, Pietrabissa R. 2002. Mechanical behavior of coronary stents investigated through the finite element method. J Biomech. 35(6):803–811.
- Migliavacca F, Petrini L, Montanari V, Quagliana I, Auricchio F, Dubini G. 2005. A predictive study of the mechanical behaviour of coronary stents by computer modelling. Med Eng Phys. 27(1):13–18.
- Milewski K, Zurakowski A, Pajak J, Pajak-Zielinska E, Liszka L, Buszman PP, Bis J, Debinski M, Buszman PE. 2009. Comparison of thin-strut cobalt-chromium stents and stainless steel stents in a porcine model of neointimal hyperplasia. Med Sci Monit. 16(1):BR40–4.
- Mortier P, De Beule M, Carlier SG, Van Impe R, Verhegghe B, Verdonck P. 2008. Numerical study of the uniformity of balloon-expandable stent deployment. J Biomech Eng. 130(2):021018.
- Nikam N, Steinberg TB, Steinberg DH. 2014. Advances in stent technologies and their effect on clinical efficacy and safety. Med Devices (Auckland, NZ). 7(165–178).
- Qiu TY, Song M, Zhao LG. 2018. A computational study of crimping and expansion of bioresorbable polymeric stents. Mech Time Depend Mater. 22(2):273–290.
- Raamachandran J, Jayavenkateshwaran K. 2007. Modeling of stents exhibiting negative Poisson's ratio effect. Comput Methods Biomech Biomed Eng. 10(4):245–255.
- Shen X, Yi H, Ni Z. 2008. Effects of stent design parameters on radial force of stent. 2nd International Conference on Bioinformatics and Biomedical Engineering. IEEE; p. 1712–1716.
- Squire JC. 2000. Dynamics of endovascular stent expansion [Ph.D. thesis]. Cambridge (MA): Massachusetts Institute of Technology.
- Timmins LH, Meyer CA, Moreno MR, Moore JE. 2008. Effects of stent design and atherosclerotic plaque composition on arterial wall biomechanics. J Endovasc Ther. 15(6):643–654.
- Umer M, Ali MN, Mubashar A, Mir M. 2019. Computational modeling of balloon-expandable stent deployment in coronary artery using the finite element method. RRCC. 10:43–56.
- Wang WQ, Liang DK, Yang DZ, Qi M. 2006. Analysis of the transient expansion behavior and design optimization of coronary stents by finite element method. J Biomech. 39(1):21–32.
- Zhao S, Gu L, Froemming SR. 2012. On the importance of modeling stent procedure for predicting arterial mechanics. J Biomech Eng. 134(12):121005.
- Zun PS, Anikina T, Svitenkov A, Hoekstra AG. 2017. A comparison of fully-coupled 3D in-stent restenosis simulations to in-vivo data. Front Physiol. 8:284.