References
- ASTM D1190, Standard specification for Concrete Joint Sealer, hot-applied elastic type. American Society for Testing and Materials, 100 Barr Harbor Drive, West Conshohocken, PA, USA
- ASTM D3405, Standard specification for joint sealants, hot-applied, for concrete and asphalt pavements. American Society for Testing and Materials, 100 Barr Harbor Drive, West Conshohocken, PA, USA
- ASTM D4060, Test method for abrasion resistance of organic coatings by the Taber abraser. American Society for Testing and Materials, 100 Barr Harbor Drive, West Conshohocken, PA, USA
- ASTM D6373, Standard specification for performance graded asphalt binder. American Society for Testing and Materials, 100 Barr Harbor Drive, West Conshohocken, PA, USA
- ASTM D6690, Standard specification for joint and crack sealants, hot applied, for concrete and asphalt pavements. American Society for Testing and Materials, 100 Barr Harbor Drive, West Conshohocken, PA, USA
- Al-Qadi , I.L. , Loulizi , A. , Aref , S. , Masson , J-F. and McGhee , K.K. 2005 . Modification of bending-beam rheometer specimen for low-temperature evaluation of bituminous-based hot-poured crack sealants . Transp. Res. Rec. , 1933 : 97 – 106 .
- Chong , G.J. 1990 . Rout and seal cracks in flexible pavements: a cost effective preventive maintenance procedure . Transp. Res. Rec. , 1268 : 8 – 16 .
- Hoiberg , A.J. 1979 . Bituminous Materials: Asphalt, Tars and Pitches, Volume 1 General Aspects , Huntington, USA : Robert E. Krieger Publishing Company .
- Masson, J-F., Bituminous sealants for pavement joints and cracks: building basis for a performance-based specification. RILEM Third International Symposium on Durability of Building and Construction Sealants, pp. 315–328, 2000
- Masson , J-F. , Collins , P. and Légaré , P.P. 1999 . Performance of pavement crack sealants in cold urban conditions . Can. J. Civ. Eng. , 26 : 395 – 401 .
- Masson , J-F. , Collins , P. , Margeson , J. and Polomark , G. 2002 . Analysis of bituminous sealants by physicochemical methods: relationship to field performance . Transp. Res. Rec. , 1795 : 33 – 39 .
- Masson , J-F. , Boudreau , S. and Girard , C. 2003 . “ Guidelines for sealing and filling cracks in asphalt concrete pavement: A best practice ” . In National Guide to Sustainable Municipal Infrastructure , Ottawa, Canada : National Research Council . Available online at: http://www.infraguide.gc.ca
- Masson , J-F. , Collins , P. and Lowery , M. 2005 . Temperature control of hot-poured sealants during the sealing of pavement cracks . Construct. Build. Mater. , 19 : 423 – 429 .
- Masson , J-F. , Collins , P. , Perraton , D. and Al-Qadi , I. 2007 . Rapid assessment of the tracking resistance of bituminous crack sealants . Can. J. Civ. Eng. , 34 : 126 – 131 .
- Rouse , R. 1997 . “ Crumb rubber modifiers for asphalt pavements ” . In Asphalt Science and Technology , Edited by: Usmani , A.M. New York : Marcel Dekker .
- Smith , K.L. and Romine , A.R. 1999 . “ Materials and procedure for sealing and filling cracks in asphalt-surfaced pavements ” . In Manual of Practice , Washington, DC : Publication No. FHWA-RD-99-147, Federal Highway Administration .