PFWD, DCP and CBR correlations for evaluation of lateritic subgrades

References

• AASHTO . 1993 . American Association of State Highway and Transport Officials guide for mechanistic-empirical (M-E) design and analysis , Washington, DC : AASHTO .
   Google Scholar
• Abu-Farsakh, M.Y., et al., 2004. Assessment of in situ test technology for construction control of base courses and embankments, Report No. FHWA/LA.04/389, Louisiana Transportation Research Center, Baton Rouge, LA
   Google Scholar
• ASTM, 2008. WK11075 new standard test method for measuring deflections with a light weight deflectometer (LWD). ASIM International, West conshohocken, PA [online]. Available from: http://www.astm.org/DATABASE.CART/WORKITEMS/WK11075.htm [Accessed 20 April 2006].
   Google Scholar
• Burmister , D.M. 1958 . Evaluation of pavement systems of the WASHO road test by layer system method . Highway Research Board Bulletin , 177 : 26 – 54 .
   Google Scholar
• Burnham, T.R., 1996. Application of the dynamic cone penetrometer to MnDoT's pavement assessment procedures: revised draft report. Office of Minnesota Road Research
   Google Scholar
• Chen, D.-H., et al., 1999. Evaluation of in situ resilient modulus testing techniques. Proceedings of the transportation research board annual meeting
   Google Scholar
• Chen , D.H. , Wang , J.N. and Bilyeu , J. 2001 . Application of dynamic cone penetrometer in evaluation of base and subgrade layers , Transportation Research Record Vol. 1764 , Washington, DC : Transportation Research Board .
   Google Scholar
• Chen , D.H. 2005 . A correlation between dynamic cone penetrometer values and pavement layer oduli . Geotechnical Testing Journal , 38 ( 1 )
   Google Scholar
• Chua , K.M. 1988 . “ Determination of CBR and elastic modulus of soils using a portable pavement dynamic cone penetrometer ” . In Penetration testing , Edited by: De Ruiter . Rotterdam : Balkema . ISOPT-1
   Google Scholar
• Chua , K.M. and Lytton , R.L. 1981 . “ Dynamic analysis using the portable dynamic cone penetrometer ” . In Transportation Research Record , Vol. 1192 , 702 – 708 . Washington, DC : TRB, National Research Council .
   Google Scholar
• Coonse, J., 1999. Estimating California bearing ratio of cohesive piedmont residual soil using the scala dynamic cone penetrometer. Masters Thesis (MSCE). North Carolina State University, Raleigh, NC 18
   Google Scholar
• De Beer , M. 1990 . Use of dynamic cone penetrometer in the design of road structures. Geo-techniques in African Environment , 167 – 176 . Rotterdam : Balkema .
   Google Scholar
• Egorov, K.E., 1965. Calculation of bed for foundation with ring footing. Proceedings of the sixth international conference on soil mechanics and foundation engineering, 2, 41–45
   Google Scholar
• Englo, 2005. Estonia Inspector – 2, Falling Weight Deflectometer, Operation Instruction, Englo, Tallin, Estonia
   Google Scholar
• Ese, D., et al., 1994. The use of dynamic cone penetrometer (DCP) for road strengthening design in Norway. Proceedings of the international conference on bearing capacity of road and airfield, 3–22
   Google Scholar
• Fleming, P.R., Frost, M.W., and Rogers, C.D.F., 2000. A comparison of devices for measuring stiffness in situ. Proceedings fifth international conference on unbound aggregate in roads, Nottingham, United Kingdom
   Google Scholar
• Fleming, P.R., Rogers, C.D.F., and Frost, M.W., 1998. Performance parameters and target values for construction of UK road foundations. Proceedings of the fifth international conference on bearing capacity of roads and airfields, Vol. 3, Trondheim, Norway
   Google Scholar
• Gabr , M.A. 2000 . DCP criteria for performance evaluation of pavement layers . ASCE Journal of Performance and Constructed Facilities , 14 ( 4 ) : 141 – 148 .
   Google Scholar
• Gros , C. 1993 . Use of a portable falling weight deflectometer: loadman , Publications of Road and Transport Laboratory Vol. 20 , Finland : University of Oulu .
   Google Scholar
• Harison , J.R. 1983 . Correlation between CBR and DCP strength measurements of soils . Proceedings of institution of civil engineers , London, Part 2
   Google Scholar
• Harison, J.R., 1987. Correlation between California bearing ratio and dynamic cone penetrometer strength measurement of soils. Proceedings of institution of civil engineers, London, Part 283, 83–87
   Google Scholar
• IS: 2720-Part 29-1966, 1966. Indian Standard method of test for soils: determination of dry density of soil in place by the core cutter method
   Google Scholar
• IS: 2720-Part 2-1973, 1973a. Indian Standard method of test for soils: Part 2 determination of water content
   Google Scholar
• IS: 2720-Part 2-1973, 1973b. Indian Standard method of test for soils: determination of water content
   Google Scholar
• IS: 2720-Part 16-1979, 1979. Indian Standard method of test for soils, Part 16, laboratory determination of CBR, first revision, Bureau of Indian Standards, revised in 1989
   Google Scholar
• Jahren , C.T. , Ellsworth , B.J. and Bergeson , K. 1999 . Constructability test for cold-in-place asphalt recycling . Journal of Construction Engineering , 125 ( 5 ) : 325 – 329 .
   Web of Science ®Google Scholar
• Kleyn, E.G., 1975. The use of the dynamic cone penetrometer (DCP), Report No. 2/74 Transval Roads Department, South Africa
   Google Scholar
• Konrad, J.-M. and Lachance, D., 2000. Mechanical properties of unbound aggregates from DCP and plate load tests. Proceedings of the fifth international conference on unbound aggregate in roads, Nottingham, United Kingdom
   Google Scholar
• Livneh , M. 1989 . “ Validation of correlations between a number of penetration tests and in situ California bearing ratio tests ” . In Transportation Research Record , Vol. 1219 , 56 – 67 . Washington, DC : Transportation Research Board .
   Google Scholar
• Livneh , M. and Goldberg , Y. 2001 . “ Quality assessment during road formation and foundation construction: use of falling-weight deflectometer and light drop weight ” . In Transportation Research Record , Vol. 1755 , 69 – 77 . Washington, DC : TRB, National Research Council .
   Google Scholar
• Livneh, M. and Ishai, I., 1988. The relationship between in situ CBR test and the various penetration tests. Proceedings of the first international conference on penetration testing, Orlando, Fl, 445–452
   Google Scholar
• Livneh, M. and Livneh, N.A., 1994. Subgrade strength evaluation with the extended dynamic cone penetrometer. Proceedings of the seventh international IAEG congress
   Google Scholar
• Livneh , M. , Ishai , I. and Livneh , N.A. 1992 . Automated DCP device versus manual DCP device . Road and Transport Research , 1 ( 4 ) : 42
   Google Scholar
• Luo, X., Salgado, R., and Altschaeffl, A., 1998. Dynamic cone penetration test to assess the mechanical properties of the subgrade soil. Joint Transportation Research Program, Project No. C-36-45N, Final report
   Google Scholar
• Nazarian, S., Yuan, D., and Arellano, M., 2002. Quality management of base and subgrade materials with seismic methods. Proceedings of the 81st annual meeting transportation board
   Google Scholar
• Nazzal, M., 2003. Field evaluation of in situ test technology for QC/QA procedures during construction of pavement layers and embankments. Thesis (MS). Lousiana State University, Baton Rouge
   Google Scholar
• Nazzal, M., et al., 2007. Evaluating the LFWD device for in situ measurement of elastic modulus of pavement layers. 86th transportation research board annual meeting January 9–13, Washington, DC
   Google Scholar
• Pen, C.K., 1990. An assessment of the available methods of analysis for estimating the elastic moduli of road pavements. Proceedings of the third international conference on bearing capacity of roads and airfields, Trondheim
   Google Scholar
• Powell , W.D. 1984 . “ The structural design of bituminous roads ” . In TRRL report LR 1132 , 62 London : TRRL .
   Google Scholar
• Rahim, A.M. and George, K.P., 2002. Automated dynamic cone penetrometer for subgrade resilient modulus characterization. Proceedings of the 81st annual meeting transportation board
   Google Scholar
• Sawangsuriya, A., Edil, T., and Bosscher, P., 2002. Laboratory evaluation of the soil stiffness gauge (SSG). 81st annual meeting of the transportation research board, January, Washington, DC
   Google Scholar
• Scala , A.J. 1956 . Simple methods of flexible pavement design using cone penetrometers . New Zealand Engineering , 2 ( 2 )
   Google Scholar
• Seyman, E., 2003. Laboratory evaluation of in situ tests as potential QC/QA tools. Thesis (MS). Bogazici University, Istanbul, Turkey
   Google Scholar
• Siekmeir , J.A. , Young , D. and Beberg , D. 1999 . “ Comparison of the dynamic cone penetrometer with other tests during subgrade and granular base characterization in Minnesota ” . In Nondestructive testing of pavements and backcalculation of moduli: third volume , ASTM 1375 Edited by: Tayabji , S.D. and Lukanen , E.O. West Conshohocken, PA : American Society for Testing Materials .
   Google Scholar
• Smith , R.B. and Pratt , D.N. 1983 . A field study of in situ California bearing ratio and dynamic cone penetrometer testing for subgrade investigation . Australian Road Research , 13 ( 4 ) : 285 – 293 .
   Google Scholar
• Steinert, B.C., Humphrey, D.N., and Kestler, M.A., 2005. Portable falling weight deflectometer study. NETC Project No. 00-4, Prepared for New England Transportation Consortium
   Google Scholar
• Van Vuuren , D.J. 1969 . Rapid determination of CBR with the portable dynamic cone penetrometer, The Rhodesign Engineer, paper No. 105
   Google Scholar
• Webster, S.L., Grau, R.H., and Williams, T.P., 1992. Description and application of dual mass dynamic cone penetrometer, Final Report, Department of Army, Waterways Experiment Station, Vicksberg, MS
   Google Scholar
• Yaji, R.K. and Gowda, R., 1995. Effect of contamination by some chemicals on the engineering behaviour of shedi soil. Proceedings of Indian geotechnical conference (IGS-95), Bangalore, India
   Google Scholar
• WSDOT web-site: http://training.ce.washington.edu/WSDOT/Modules/09_pavement_evaluation/09-5_body.htm [Accessed 28 April]
   Google Scholar