Enhancing the performance of crumb rubber-modified binders through varying the interaction conditions

References

• Abdelrahman , M.A. 2006 . Controlling the performance of crumb rubber modifier (CRM) binders through the addition of polymer modifiers . Transportation Research Record , 1962 : 64 – 70 .
   Google Scholar
• Abdelrahman , M.A. and Carpenter , S.H. Controlling low temperature properties of asphalt rubber binders . In: 2nd transportation specialty conference . Canadian Society of Civil Engineering, Halifax, Nova Scotia, Canada
   Google Scholar
• Abdelrahman , M.A. and Carpenter , S.H. 1999 . The mechanism of the interaction of asphalt cement with crumb rubber modifier (CRM) . Transportation Research Record , 1661 : 106 – 113 .
   Google Scholar
• Asphalt Institute Research Center, 1993. Background of SHRP asphalt binder test methods. Demonstration Project 101, National Asphalt Training Center, Lexington, Kentucky
   Google Scholar
• Bahia, H., 1995. Critical evaluation of asphalt modification using the SHRP concepts. In: The 74th Annual Meeting of the Transportation Research Board, Washington DC
   Google Scholar
• Bahia , H.U. and Davies , R. 1994 . Effect of crumb rubber modifiers (CRM) on performance-related properties of asphalt binders . Journal of the Association of Asphalt Paving Technologists , 63 : 414 – 449 .
   Google Scholar
• BAS Engineering Consultants, 1992. Evaluation of the use of rubber modified asphalt concrete pavement in the state of Illinois. Submitted to Illinois Department of Energy and Natural Resources
   Google Scholar
• Billiter, T., et al., 1995. Physical properties of asphalt–rubber binders. In: The 74th Annual Meeting of the Transportation Research Board, Washington DC
   Google Scholar
• Billiter , T.C. 1997 . Production of asphalt–rubber binders by high-cure conditions . Transport Research Record , 1586 : 50 – 56 .
   Google Scholar
• Buckly , D. and Berger , M. 1962 . The swelling of polymer system in solvents . Journal of Polymer Science , 56 : 175
   Google Scholar
• Chehovits, J., 1993. Binder design procedures. Session 9.0, crumb rubber modifier workshop notes, Federal Highway Administration, Office of Technology Applications
   Google Scholar
• Chehovits, J. and Hicks, R., 1993. Mix design procedures. Session 10.0, crumb rubber modifier workshop notes, Federal Highway Administration, Office of Technology Applications
   Google Scholar
• Chehovits , J. , Dunning , R. and Morris , G. 1982 . Characteristic of asphalt–rubber by the sliding plate microviscometer . Journal of the Association of Asphalt Paving Technologists , 51 : 241
   Google Scholar
• Green, E. and Tolonen, W., 1977. The chemical and physical properties of asphalt-rubber mixtures, part I – basic material behavior. Arizona: Arizona Department of Transportation, FHWA-AZ-HPR14-162
   Google Scholar
• Heitzman , M. 1992 . State of the practice-design and construction of asphalt paving materials with crumb rubber modifier . USA: Federal Highway Administration, Report FHWA-SA-92-022
   Google Scholar
• Lalwani, S., Abushahada, A., and Halasa, A., 1982. Reclaimed rubber-asphalt blends measurements of rheological properties to assess toughness, resiliency, consistency and temperature sensitivity. Proceedings of the association of asphalt paving technologists, 51
   Google Scholar
• McGennis , R. 1995 . Evaluation of physical properties of fine crumb rubber modified asphalt binders . Transport Research Record , 1488 : 62 – 71 .
   Google Scholar
• Oliver , J. 1981 . Modification of paving asphalts by digestion with scrape rubber . Transport Research Record , 821 : 37
   Google Scholar
• Pavlovich, R., Shuler, T., and Rosner, J., 1979. Chemical & physical properties of asphalt-rubber, phase II product specification and test procedures. Arizona: Arizona Department of Transportation, FHWA/AZ-79/121
   Google Scholar
• Rouse, M., 1994. Application of crumb rubber modifiers (CRM) in asphaltic materials. In: The Meeting of the American Chemical Society, Rubber Division, Chicago, IL
   Google Scholar
• Shashidhar, N., Needham, S., and Chollar, B., 1995. Rheological properties of chemically modified asphalts. In: The 74th Annual Meeting of the Transportation Research Board, Washington DC
   Google Scholar
• Shenoy , A.V. 1999 . Rheology of filled polymer systems , Netherlands : Kluwer Academic Publishers .
   Google Scholar
• Shenoy , A. 2001 . Reifinment of the superpave specification parameter for performance grading of asphalt . Journal of Transportation Engineering , 127 ( 5 ) : 357 – 362 .
   Web of Science ®Google Scholar
• Shenoy , A. 2004 . A comprehensive treatise of the high temperature specification parameter |G*|/(1 − (1/tan δ sin δ)) for performance grading of asphalts . Applied Rheology , 14 ( 6 ) : 303 – 314 .
   Google Scholar
• Strategic Highway Research Program . 1993 . Binder characterization and evaluation , Chemistry Vol 2 , Washington DC : National Research Council . SHRP-A-368
   Google Scholar
• Stroup-Gardiner, M., Newomb, D., and Tanquist, B., 1993. Asphalt–rubber interactions, Transportation Research Board Annual Meeting, January
   Google Scholar
• Takallou , H. and Sainton , A. 1992 . Advances in technology of asphalt paving materials containing used rubber . Transport Research Record , 1339 : 23
   Google Scholar
• Western Research Institute, 1994. Fundamental properties of asphalts and modified asphalts. Semi-Annual Technical Report. USA: Federal Highway Administration
   Google Scholar