322
Views
20
CrossRef citations to date
0
Altmetric
Original Articles

The effect of polymer modification on hot mix asphalt fracture at tensile loading conditions

, , &
Pages 403-413 | Received 03 Feb 2010, Accepted 20 Apr 2010, Published online: 28 May 2010

References

  • Aglan, H.A., 1997. Polymer modifiers for improved performance of asphaltic mixtures. Asphalt Science and Technology, Arthur Usmani
  • Bahia , H.U. 2001 . Characterization of modified asphalt binders in Superpave mix design , Washington, DC : National Academy Press . NCHRP Report 459
  • Birgisson , B. 2006 . Micromechanical analyses for measurement and prediction of HMA fracture energy . Transportation Research Record , 1970 : 186 – 195 .
  • Birgisson , B. 2007 . Determination of fundamental tensile failure limits of mixtures . Proceedings of the Association of Asphalt Paving Technologists , 76 : 303 – 344 .
  • Deacon , J.A. 1997 . Influence of binder loss modulus on the fatigue performance of asphalt concrete pavements . Journal of the Association of Asphalt Paving Technologists , 66 : 633
  • Freeman , R.B. , Newman , J.K. and Ahlrich , R.A. 1997 . “ Effect of polymer modifiers on dense-graded, heavy-duty mixtures ” . In Eighth international conference on asphalt pavements , Seattle, WA. Lino Lakes, MN : International Society for Asphalt Pavements .
  • Harvey , J.T. 1995 . A fatigue performance of asphalt concrete mixes and its relationship to asphalt concrete pavement performance in California , California, CA : California Department of Transportation . Report No. RTA-65W485-2
  • Harvey , J.T. 1997 . “ A reliability-based mix design and analysis system for mitigating fatigue distress ” . In Eighth international conference on asphalt pavements , Seattle, WA. Lino Lakes, MN : International Society for Asphalt Pavements .
  • Khattak , M.J. and Baladi , G.Y. 1998 . Engineering properties of polymer modified asphalt mixture . Transportation Research Record , 1638 : 12 – 22 .
  • Khattak , M.J. , Baladi , G.Y. and Drzal , L.T. 2007 . Low temperature binder-aggregate adhesion and mechanistic characteristics of polymer modified asphalt mixtures . Journal of Materials in Civil Engineering , 19 ( 5 ) : 411 – 422 .
  • Kim , Y.R. , Lee , H.J. and Little , D. 1997 . Fatigue characterization of asphalt concrete using viscoelasticity and continuum damage theory . Journal of the Association of Asphalt Paving Technologist , 66 : 520 – 569 .
  • Kim , B. , Roque , R. and Birgisson , B. 2003 . Effect of styrene butadiene styrene modifier on cracking resistance of asphalt mixture . Transportation Research Record , 1829 : 8 – 15 .
  • Kim , Y.R. , Allen , D.H. and Little , D.N. 2005 . Damage-induced modeling of asphalt mixtures through computational micromechanics and cohesive zone . Journal of Materials in Civil Engineering , 17 ( 5 ) : 477 – 484 .
  • King , G.N. 1993 . Influence of asphalt grade and polymer concentration on the low-temperature performance of polymer modified asphalt . Journal of the Association of Asphalt Paving Technologists , 62 : 1 – 22 .
  • Lu , X. and Isacsson , U. 1997 . Rheological characterization of styrene–butadiene–styrene copolymer modified bitumens . Construction and Building Materials , 11 ( 1 ) : 23 – 32 .
  • Lu , X. , Isacsson , U. and Ekblad , J. 2003 . Influence of polymer modification on low temperature behaviour of bituminous binders and mixtures . Materials and Structures , 36 : 652 – 656 .
  • Lundström , R. and Isacsson , U. 2004 . Linear viscoelastic and fatigue characteristics of styrene–butadiene–styrene modified asphalt mixtures . Journal of Materials in Civil Engineering , 16 ( 6 ) : 629 – 638 .
  • Newman , J.K. 2000 . “ Polymer modification of asphalt mixtures designed for military airfield pavements; fatigue properties according to AASHTO TP-8 ” . In Transportation system 2000 workshop , San Antonio, TX : Texas A&M .
  • Pucci , T. , Dumont , A.G. and Di Benedetto , H. 2004 . Thermomechanical and mechanical behavior of asphalt mixtures at cold temperature road and laboratory investigations . Road Materials and Pavement Design , 5 ( 1 ) : 45 – 72 .
  • Romero , P. , Stuart , K.D. and Mogawer , W. 2000 . Fatigue response of asphalt mixtures tested by the federal highway administration's accelerated load facility . Journal of the Association of Asphalt Technologists , 69 : 212
  • Roncella , R. , Romeo , E. and Forlani , F. 2005 . “ Image based microstructural analysis in fracture mechanics ” . In Proceedings of the 7th optical 3-D measurement techniques , Vienna, Austria : Druckerei Janetscheck .
  • Roque , R. and Buttlar , W.G. 1992 . The development of a measurement and analysis system to accurately determine asphalt concrete properties using the indirect tensile mode . Journal of the Association of asphalt Technologists , 61 : 304 – 332 .
  • Roque , R. 2002 . Hot mix asphalt fracture mechanics: a fundamental crack growth law for asphalt mixtures . Journal of the Association of Asphalt Paving Technologist , 71 : 816 – 827 .
  • Roque , R. 2004 . Development and field evaluation of energy-based criteria for top-down cracking performance of hot mix asphalt . Journal of the Association of Asphalt Paving Technologists , 73 : 229 – 260 .
  • Sargand , S.M. and Kim , S.S. 2001 . “ Performance evaluation of polymer modified and unmodified Superpave mixes ” . In Second international symposium on maintenance and rehabilitation of pavements and technological control , Auburn, AL. São Paulo, Brazil : IJP, Merighi .
  • Schwartz , C.W. 2002 . “ Viscoplasticity modeling of asphalt concrete behavior ” . In 15th ASCE engineering mechanics conference , New York : ASCE .
  • Uzan , J. 2005 . Viscoelastic–viscoplastic model with damage for asphalt concrete . Journal of Materials in Civil Engineering , 17 ( 5 ) : 528 – 534 .
  • Wagoner , M.P. , Buttlar , W.G. and Paulino , G.H. 2005 . Development of a single-edge notched beam test for asphalt concrete mixtures . Journal of Testing and Evaluation , 33 ( 6 ) : 452 – 460 .
  • Zhang , Z. 2001 . Identification and verification of a suitable crack growth law . Journal of the Association of Asphalt Paving Technologists , 70 : 206 – 241 .

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.