An evaluation of the built-in temperature difference input parameter in the jointed plain concrete pavement cracking model of the Mechanistic–Empirical Pavement Design Guide

References

• ARA, Inc., ERES Division, 2004. Guide for Mechanistic–Empirical Design of New and Rehabilitated Pavement Structure. Final Report NCHRP 1-37A
   Google Scholar
• Barenberg, E.J., et al., 2005. Review Comments on the 2002 MEDG for New Concrete Pavements prepared for NCHRP 1-40A (02)
   Google Scholar
• Beckemeyer , C. , Khazanovich , L. and Yu , T. 2002 . Determining amount of built-in curling in jointed plain concrete pavement: case study of Pennsylvania I-80 . Transportation Research Record: Journal of the Transportation Research Board , 1809 : 85 – 92 .
   Google Scholar
• Byrum , C. 2000 . Analysis by high-speed profile of jointed concrete pavement slab curvatures . Transportation Research Record: Journal of the Transportation Research Board , 1730 : 1 – 9 .
   Google Scholar
• Coree , B. 2005 . Implementing the Mechanistic–Empirical Pavement Design Guide: Technical Report , Ames, IA : Iowa State University . Report prepared for the Iowa Highway Research Board (IHRB) Project TR-509
   Google Scholar
• Gutierrez, J.J., 2008. Evaluating the JPCP Cracking Model of the Mechanistic–Empirical Pavement Design Guide. Thesis (Degree Master of Science in Civil Engineering). University of Pittsburgh
   Google Scholar
• Gutierrez, J.J., 2008. Evaluating the JPCP Cracking Model of the Mechanistic–Empirical Pavement Design Guide. Thesis (Degree Master of Science in Civil Engineering). University of Pittsburgh
   Google Scholar
• Hall , K.D. and Beam , S. 2004 . Estimating the sensitivity of design input variables for rigid pavement analysis with a Mechanistic–Empirical Design Guide . Transportation Research Record: Journal of the Transportation Research Board , l919 : 65 – 73 .
   Google Scholar
• Kannekanti , V. and Harvey , J. 2005 . Sensitivity analysis of 2002 design guide rigid pavement distress prediction models , Davis, CA : University of California . Report prepared for the California Department of Transportation
   Google Scholar
• Khazanovich , L. and Yu , T. 2005 . “ Accounting for concrete shrinkage in the Mechanistic–Empirical Pavement Design Procedure ” . In Creep, shrinkage and durability of concrete structures , Edited by: Pijaudier-Cabot , G. , Gerard , B. and Acker , P. 287 – 292 . London : Hermes Science Publishing, Ltd .
   Google Scholar
• Khazanovich , L. 2001 . Development of rapid solutions for prediction of critical CRCP stresses . Transportation Research Record: Journal of the Transportation Research Board , 1778 : 64 – 72 .
   Google Scholar
• Khazanovich , L. 2008 . Adaptation of MEPDG for design of Minnesota low-volume Portland cement concrete pavements . Transportation Research Record: Journal of the Transportation Research Board , 2087 : 57 – 67 .
   Google Scholar
• McCracken, J., Asbahan, R., and Vandenbossche, J.M., 2008. Evaluating the cracking predicted by the MEPDG using results from the S.R.-22 smart pavement study. Final Report for Pennsylvania Department of Transportation, Report No. PA-510601/WO-003
   Google Scholar
• National Oceanic and Atmospheric Administration, 2007. Available from: www.noaa.gov (http://www.noaa.gov)
   Google Scholar
• Rao , S. and Roesler , J.R. 2005 . Characterizing effective built in curling from concrete pavement field measurements . Journal of Transportation Engineering , 131 ( 4 ) : 320 – 327 .
   Web of Science ®Google Scholar
• Vandenbossche, J.M., 2003. Interpreting falling weight deflectometer results for curled and warped Portland cement concrete pavements. Thesis (Degree Doctor of Philosophy in Civil Engineering). University of Minnesota
   Google Scholar
• Vandenbossche , J.M. 2009 . Comparison of measured vs. predicted performance of jointed plain concrete pavements using the Mechanistic–Empirical Pavement Design Guide . International Journal of Pavement Engineering , under review
   Web of Science ®Google Scholar
• Well , S.A. , Phillips , B.M. and Vandenbossche , J.M. 2006 . Quantifying built-in construction gradients and early-age slab shape to environmental loads for jointed plain concrete pavements . International Journal for Pavement Engineers , 7 ( 4 ) : 275 – 289 .
   Google Scholar
• Well , S.A. , Phillips , B.M. and Vandenbossche , J.M. 2006 . Quantifying built-in construction gradients and early-age slab shape to environmental loads for jointed plain concrete pavements . International Journal for Pavement Engineers , 7 ( 4 ) : 275 – 289 .
   Google Scholar
• Yu , T. 1998 . Analysis of concrete pavement responses to temperature and wheel loads measured from instrumented slabs . Transportation Research Record: Journal of the Transportation Research Board , 1639 : 94 – 101 .
   Google Scholar