551
Views
45
CrossRef citations to date
0
Altmetric
Original Articles

3D discrete element models of the hollow cylindrical asphalt concrete specimens subject to the internal pressure

&
Pages 429-439 | Received 01 Jun 2008, Accepted 23 Apr 2010, Published online: 28 May 2010

References

  • AASHTO Joint Task Force on Pavements and the National Cooperative Highway Research Program (NCHRP). AASHTO 2002 Design Guide – The Mechanistic–Empirical Pavement Design Guide (M-EPDG)
  • Alavi , S.H. and Monismith , C.L. 1994 . Time and temperature dependent properties of asphalt concrete mixes tested as hollow cylinders and subjected to dynamic axial and shear loads . Journal of the Association of Asphalt Paving Technologists , 63 : 152 – 181 .
  • Al-Khateeb, G.G., 2001. Development of a hollow cylinder tensile tester to obtain fundamental mechanical properties of asphalt paving mixtures. Dissertation (PhD). University of Illinois at Urbana-Champaign
  • Al-Khateeb , G.G. and Buttlar , W.G. 2000 . Hollow cylinder tensile tester for asphaltic paving mixtures . Proceedings of the Mid-Continent Transportation Symposium , : 14 – 19 . May, Ames, IA
  • Braz , D. , Lopes , R.T. and da Motta , L.M.G. 2000 . Computed tomography: an evaluation of the effect of adding polymer SBS to asphaltic mixtures used in paving . Applied Radiation and Isotopes , 53 ( 4 ) : 725 – 729 .
  • Buttlar , W.G. and You , Z. 2001 . Discrete element modeling of asphalt concrete: microfabric approach . Transportation Research Record , 1757 : 111 – 118 .
  • Buttlar , W.G. , Al-Khateeb , G.G. and Bozkurt , D. 1999 . Development of a hollow cylinder tensile tester to obtain mechanical properties of bituminous paving mixtures . Journal of the Association of Asphalt Paving Technologists , 68 : 369 – 403 .
  • Buttlar , W.G. , Bauer , J.M. and Sherman , D.S. 2002 . Dynamic modulus of asphalt concrete with a hollow cylinder tensile tester . Transportation Research Record , 1789 : 183 – 190 .
  • Buttlar , W.G. 2004 . Development of hollow cylinder tester in the fundamental property test of pavement mixture . Journal of Association of Asphalt Paving Technologists , 73 : 367 – 400 .
  • Chang, G.K. and Meegoda, J.N., 1999. Micro-mechanic model for temperature effects of hot mixture asphalt concrete. Journal of the Transport Research Record, National Research Council, Washington, DC, 1687, 95–103
  • Christensen , R.M. and Lo , K.H. 1986 . Solutions for effective shear properties in three phase sphere and cylinder models . Journal of the Mechanics and Physics of Solids , 27 : 315 – 330 .
  • Christensen , D.W. , Pellien , T. and Bonaquist , R.F. 2003 . Hirsch models for estimating the modulus of asphalt concrete . Journal of the Association of Asphalt Paving Technologists , 72 : 97 – 121 .
  • Counto , V.J. 1964 . The effect of the elastic modulus of the aggregate on the elastic modulus, creep, and creep recovery of concrete . Magazine of Concrete Research , 62 ( 48 ) : 129 – 138 .
  • Crockford , W.W. 1993 . Role of principal-plane rotation in flexible pavement deformation . Journal of Transportation Engineering, ASCE , 119 ( 1 ) : 124 – 141 .
  • Cundall , P.A. and Hart , R.D. 1992 . Numerical modeling of discontinua . Engineering Computations , 9 ( 2 ) : 101 – 113 .
  • Cundall , P.A. , Drescher , A. and Strack , O.D.L. 1982 . “ Numerical experiments on granular assemblies: measurements and observations ” . In Deformation and failure of granular materials , Edited by: Vermeer , P.A. and Luger , H.J. 355 – 370 . Rotterdam : Balkema .
  • Dai , Q. and Sadd , M.H. 2004 . Parametric model study of microstructure effects on damage behavior of asphalt samples . International Journal of Pavement Engineering , 5 ( 1 ) : 19 – 30 .
  • Dai , Q. 2005 . Prediction of damage behaviors in asphalt materials using a micromechanical finite-element model and image analysis . Journal of Engineering Mechanics , 131 ( 7 ) : 668 – 677 .
  • Guddati , M.N. , Feng , Z. and Kim , R. 2002 . Toward a micromechanics-based procedure to characterize fatigue performance of asphalt concrete . Transportation Research Record , 1789 : 121 – 128 .
  • Hashin , Z. 1962 . The elastic moduli of heterogeneous materials . Journal of Applied Mechanics , 29 : 143 – 150 .
  • Hashin , Z. 1965 . Viscoelastic behaviour of heterogeneous media . Journal of Applied Mechanics, Transactions ASME , 9 : 630 – 636 .
  • Haven , G.B. and Swett , G.W. 1915 . The design of steam boilers and pressure vessels , 59 – 62 . New York : John Wiley and Sons, Inc. .
  • Hight , D.W. , Gens , A. and Symes , M.J. 1983 . The development of a new hollow cylinder apparatus for investigating the effects of principal stress rotation in soils . Géotechnique , 33 : 355 – 383 .
  • Hirsch , T.J. 1962 . Modulus of elasticity of concrete affected by elastic moduli of cement paste matrix and aggregate . Journal of the American Concrete Institute , 59 ( 3 ) : 427 – 452 .
  • Hori , M. and Nemat-Nasser , S. 1999 . On two micromechanics theories for determining micro–macro relations in heterogeneous solids . Mechanics of Materials , 31 ( 10 ) : 667 – 682 .
  • Itasca Consulting Group . 2004a . PFC2D Version 3.1 , Minneapolis, MN : Itasca Consulting Group .
  • Itasca Consulting Group . 2004b . PFC3D Version 3.1 , Minneapolis, MN : Itasca Consulting Group .
  • Kerner , E.H. 1956 . The elastic and thermo-elastic properties of composite media . Proceedings of the Physical Society B , 69 : 808 – 813 .
  • Kose , S. 2000 . Distribution of strains within asphalt binders in HMA using image and finite element techniques . Journal of the Transportation Research Record, Washington, DC , 1728 : 21 – 27 .
  • Liu , Y. and You , Z. 2008 . Simulation of cyclic loading tests for asphalt mixtures using user defined models within discrete element method . ASCE Proceedings, GeoCongress, The Challenge of Sustainability in the Geoenvironment, Annual Congress of the Geo-Institute of ASCE , : 742 – 749 . New Orleans, LA, USA
  • Masad , E. 2002 . Characterization of air void distribution in asphalt mixes using X-ray computed tomography . Journal of Materials in Civil Engineering , 14 ( 2 ) : 122 – 129 .
  • Nemat-Nasser , S. 2000 . Micromechanically-based constitutive model for frictional deformation of granular materials . Journal of the Mechanics and Physics of Solids , 48 ( 6–7 ) : 1541 – 1563 .
  • Nemat-Nasser , S. and Okada , N. 1995 . Direct observation of deformation of granular materials through X-ray photographs . Proceedings of Engineering Mechanics , 1 : 605 – 608 . Boulder, CO, USA
  • Papagiannakis , A.T. , Abbas , A. and Masad , E. 2002 . Micromechanical analysis of viscoelastic properties of asphalt concretes . Transportation Research Record , 1789 : 113 – 120 .
  • Plaxico , C.A. , Uddin , W. and Hackett , R.M. 1996 . Micromechanical model for asphalt materials . Proceedings of the Materials Engineering Conference , 1 : 761 – 770 . Washington, DC, USA
  • Reuss , A. 1929 . Zeitschrift für angewandte mathematik und mechanik , 9 Berlin : Verlag des Vereines Deutscher Ingenieure .
  • Saada , A.S. 1988 . “ Hollow cylinder torsional devices: their advantages and limitations ” . In ASTM STP 977, American Society for Testing and Materials 766 – 795 . Philadelphia, PA
  • Sadd , M.H. , Dai , Q. and Parameswaran , V. 2004 . Microstructural simulation of asphalt materials: modeling and experimental studies . Journal of Materials in Civil Engineering , 16 ( 2 ) : 107 – 115 .
  • Shashidhar , N. 1999 . X-ray tomography of asphalt concrete . Transportation Research Record , 1681 : 186 – 192 .
  • Shi , B. 1999 . Monitoring of internal failure evolution in soils using computerization X-ray tomography . Engineering Geology , 54 ( 3 ) : 321 – 328 .
  • Tanaka , K. and Mori , T. 1973 . Strength-differential effect in single crystal of martensite . Scripta Metallurgica , 7 ( 3 ) : 307 – 310 .
  • Tian , L. , Liu , Y. and Wang , B. 2007 . 3D DEM model and digital restructure technique for asphalt mixture simulation . Journal of Changan University, Natural Science Edition , 27 ( 4 ) : 23 – 26 .
  • Voigt , W. 1889 . Ueber die Beziehung zwischen den beiden elasticitatsconstanten isotroper Korper . Annalen der Physik und Chemie (Leipzig), Weidemann annalen , 38 : 573 – 587 .
  • Wang , L.B. , Frost , J.D. and Shashidhar , N. 2001 . “ Microstructure study of WesTrack mixes from X-ray tomography images ” . In Journal of the Transportation Research Record National Research Council Vol. 1767 , 85 – 94 . Washington, D.C.
  • Wang , L.B. 2003 . Micromechanics study on top-down cracking . Transportation Research Record , 1853 : 121 – 133 .
  • Witczak , M.W. , Bari , M. and Quayum , M.M. 2001 . Sensitivity of simple performance test dynamic modulus |E *| , Tempe, AZ : Arizona State University .
  • You , Z. 2003 . Development of a micromechanical modeling approach to predict asphalt mixture stiffness using discrete element method , : 512 Thesis (PhD). Ann Arbor, MI: Department of Civil and Environmental Engineering, published by UMI, a Bell & Howell Information Company
  • You , Z. and Buttlar , W.G. 2004 . Discrete element modeling to predict the modulus of asphalt concrete mixtures . Journal of Materials in Civil Engineering, ASCE , 16 ( 2 ) : 140 – 146 .
  • You , Z. and Buttlar , W.G. 2005 . Application of discrete element modeling techniques to predict the complex modulus of asphalt-aggregate hollow cylinders subjected to internal pressure . Journal of the Transportation Research Board, National Research Council , 1929 : 218 – 226 .
  • You , Z. and Buttlar , W.G. 2006 . Micromechanical modeling approach to predict compressive dynamic moduli of asphalt mixture using the distinct element method . Transportation Research Record: Journal of the Transportation Research Board, National Research Council , 1970 : 73 – 83 .
  • You , Z. , Adhikari , S. and Dai , Q. 2008 . Three-dimensional discrete element models for asphalt mixtures . Journal of Engineering Mechanics, ASCE , 134 ( 12 ) : 1053 – 1063 .
  • You , Z , Adhikari , S. and Dai , Q. 2010 . Air void effect on an idealised asphalt mixture using two-dimensional and three-dimensional discrete element modelling approach . International Journal of Pavement Engineering , 11 : 381 – 391 .

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.