References
- Asphalt Academy, 2009. Technical guideline: bitumen stabilised materials. Asphalt Academy, South Africa, Technical Guide TG2. 2nd ed.
- Asphalt Recycling & Reclaiming Association, 2001. Basic Asphalt Recycling Manual. Asphalt Recycling & Reclaiming Association (ARRA), PUB:NHIO1-022, Annapolis, Maryland, USA.
- Bissada, F.A., 1987. Structural response of foamed-asphalt-sand mixture in hot environments. Transportation Research Record, 1115, 134–149.
- Bocci, M., Canestrari, F., et al., 2010. Environmental issues related to the widening of an high traffic volume highway. International Journal of Pavement Research and Technology, 4, 171–177.
- Bocci, M., et al., 2011. A study on the mechanical behaviour of cement-bitumen stabilised materials. Construction and Building Materials, 25 (2), 773–778.
- Collings, D., Lindsay, R. and Shunmugam, R., 2004. LTPP exercise on a foamed bitumen treated base – evaluation of almost 10 years of heavy trafficking on mr 504 in Kwazulu-Natal. Proceedings of the 8th conference on asphalt pavements for Southern Africa, CAPSA, Sun City, 16–18 September, South Africa.
- Cooper, K.E. and Brown, S.F., 1989. Development of simple apparatus for the measurement of the mechanical properties of asphalt mixes. Proceedings of 4th Eurobitume symposium, 4–6 October, Madrid, Spain, 494–498.
- Department of the Army, 1982. Pavement maintenance management. Headquarters department of the army, Technical manual no. 5-623. Washington, DC, USA.
- Eller, A. and Olson, R., 2009. Recycled pavements using foamed asphalt in Minnesota, Report No. MN/RC 2009-09. Office of Materials & Road Research Minnesota, Department of Transportation, Saint Paul, Minnesota, USA.
- Fu, P. and Harvey, J.T., 2007. Temperature sensitivity of foamed asphalt mix stiffness: field and lab study. International Journal of Pavement Engineering, 8 (2), 137–145.
- Kandhal, P.S. and Mallick, R.B., 1997. Pavement recycling guidelines for state and local governments, Report No. FHWA-SA-97. National Center for Asphalt Technology, Auburn, Alabama, USA.
- Lewis, A.J.N. and Collings, D.C., 1999. Cold in place recycling: a relevant process for road rehabilitation and upgrading. Proceedings of 7th Conference on Asphalt Pavements for Southern Africa, CAPSA, Cape Town, South Africa.
- Loizos, A., 2007. In-situ characterization of foamed bitumen treated layer mixes for heavy-duty pavements. International Journal of Pavement Engineering, 8 (2), 123–135.
- Mallick, R.B., et al., 2001. Development of a rational mix design system for full depth reclamation. Journal of the Association of Asphalt Paving Technologists, 70, 176–221.
- Overby, C., Johansen, R. and Mataka, M., 2004. Bitumen foaming: an innovative technique used on a large scale for pavement rehabilitation in Africa. Case study: Same-Himo monitored pilot project. Proceedings of the 8th conference on asphalt pavements for Southern Africa, CAPSA, Sun City, 16–18 September, South Africa.
- Read, JM and Brown, SF, 1996. Fatigue characterization of bituminous mixtures using a simplified test method. In: J.C.Cabrera and J.R.Dxon, eds. Performance and durability of bituminous materials. E&FN Spon, London, UK, 161–173.
- Read, J.M. and Collop, A.C., 1997. Practical fatigue characterization of bituminous paving mixtures. Journal of the Association of Asphalt Paving Technologists, 66, 94–108.
- Santagata, F.A., et al., 2009. Rehabilitation of an Italian highway by cold in-place recycling techniques. Proceedings of 7th International RILEM Symposium on Advanced Testing and Characterization of Bituminous Materials, CRC Press/Balkema, Leiden, 2, 1113–1122, 27–29 May, Rhodes, Greece.
- Smith, W., 1999. Foamed bitumen stabilisation project – Warwick, QLD, Joint Transport South Australia/AustStab Seminar.
- Thompson, M.R., Garcia, L. and Carpenter, S.H., 2009. Cold in-place and full-depth recycling with asphalt products, Report No. FHWA-ICT-09-036. Illinois Center for Transportation, University of Illinois, Urbana–Champaign, Illinois, USA.