The effect of aggregate gradation on creep and moisture susceptibility performance of warm mix asphalt

REFERENCES

• AASHTO, 1997. Standard specification for transportation materials and methods of sampling and testing, 18th ed. Washington, DC :American Association of State Highway and Transportation Officials (AASHTO), 624–5800.
   Google Scholar
• Abo-Qudais, S., 2007. The effects of damage evaluation techniques on the prediction of environmental damage in asphalt mixtures. Building and Environment, 42, 288–296.
   Web of Science ®Google Scholar
• Al-Rawashdeh, A., 2009. Performance assessment of warm mix asphalt (WMA) pavements. Ohio Research Institute for Transportation and the Environment. A thesis presented to the faculty of the Russ college of Engineering and Technology of Ohio University in partial fulfillment of the requirements for the Degree of Master of Science.
   Google Scholar
• Bhusal, S., 2009. A laboratory study of warm mix asphalt for moisture damage potential and performances issues. Submitted to the Faculty of the Graduate College of the Oklahoma State University in partial fulfillment of the requirements for the Degree of Master Science. UMI number: 1461204.
   Google Scholar
• Caro, S., et al., 2008. Moisture susceptibility of asphalt mixtures, part 1: mechanisms. International Journal of Pavement Engineering, 9, 81–98.
   Google Scholar
• Chowdhury, A. and Button, J.W., 2008. A review of warm mix asphalt. Texas A&M University System. Technical Report, Report No. SWUTC/08/473700-00080-1, 75 pp.
   Google Scholar
• Diefenderfer, S.D., Mcghee, K.K., and Donadson, B.M., 2007. Installation of warm mix asphalt projects in Virginia. Report No. FHWA/VTRC 07-R25, 32 pp.
   Google Scholar
• Gandhi, T., 2008. Effects of warm asphalt additives on asphalt binder and mixture properties. Clemson University. A Dissertation Presented to the Graduate School of Clemson University. In Partial Fulfillment of the Requirements for the Degree Doctor of Philosophy Civil Engineering.
   Google Scholar
• Gandhi, T., Rogers, W., and Amirkhanian, S., 2010. Laboratory evaluation of warm mix asphalt ageing characteristics. International Journal of Pavement Engineering, 11, 133–142.
   Web of Science ®Google Scholar
• Goh, S.W. and You, Z., 2009. A simple stepwise method to determine and evaluate the initiation of tertiary flow for asphalt mixtures under dynamic creep test. Construction and Building Materials, 23, 3398–3405.
   Web of Science ®Google Scholar
• Hurley, G.C. and Prowell, B.D., 2005. Evaluation of Sasobit for use in warm mix asphalt. NCAT report, 5.
   Google Scholar
• Kanitpong, K., Charoentham, N., and Likitlersuang, S., 2011. Investigation on the effects of gradation and aggregate type to moisture damage of warm mix asphalt modified with Sasobit. International Journal of Pavement Engineering, 13(5), 451–458.
   Web of Science ®Google Scholar
• Khodaii, A. and Mehrara, A., 2009. Evaluation of permanent deformation of unmodified and SBS modified asphalt mixtures using dynamic creep test. Construction and Building Materials, 23, 2586–2592.
   Web of Science ®Google Scholar
• Kim, S., et al., 2005. Evaluation of hot mix asphalt moisture sensitivity using the Nottingham asphalt test equipment. Center for Transportation Research and Education, Iowa State University. IHRB Project TR-483 and CTRE Project 02-117.
   Google Scholar
• Merusi, F., et al., 2010. Moisture susceptibility and stripping resistance of asphalt mixtures modified with different synthetic waxes. Transportation Research Record: Journal of the Transportation Research Board, 2180, 110–120.
   Web of Science ®Google Scholar
• Perkins, S.W., 2009. Synthesis of warm mix asphalt paving strategies for use in Montana highway construction. FHWA/MT-09009/8117-38. Prepared for The State of Montana Department of Transportation, in cooperation with The U.S. Department of Transportation Federal Highway Administaration.
   Google Scholar
• Sánchez-Leal, F.J., 2007. Gradation chart for asphalt mixes: development. Journal of Materials in Civil Engineering, 19, 185.
   Web of Science ®Google Scholar
• Silva, H.M.R.D., et al., 2010. Optimization of warm mix asphalts using different blends of binders and synthetic paraffin wax contents. Construction and Building Materials, 24, 1621–1631.
   Web of Science ®Google Scholar
• Solaimanian, M., et al., 2003. Test methods to predict moisture sensitivity of hot-mix asphalt pavements. Moisture Sensitivity of Asphalt Pavement: A National Seminar, 76–113.
   Google Scholar
• Su, K., Maekawa, R., and Hachiya, Y., 2009. Laboratory evaluation of WMA mixture for use in airport pavement rehabilitation. Construction and Building Materials, 23, 2709–2714.
   Web of Science ®Google Scholar
• Trang Nhat, T., 2008. The relationship of bitumen content, aggregate surface area, and extraction time using asphalt ignition furnace. A project report submitted in partial fulfillment of the requirements for the award of the degree of Master of Engineering (Civil- Transportation and Highway). Faculty of Civil Engineering University Teknologi Malaysia.
   Google Scholar
• Wasiuddin, N.M., Zaman, M.M., and O'rear, E.A., 2008. Effect of Sasobit and aspha-min on wettability and adhesion between asphalt binders and aggregates. Transportation Research Record: Journal of the Transportation Research Board, 2051, 80–89.
   Web of Science ®Google Scholar
• Xiao, F., et al., 2010. Influence of antistripping additives on moisture susceptibility of warm mix asphalt mixtures. Journal of Materials in Civil Engineering, 22, 1047.
   Web of Science ®Google Scholar
• Zaumanis, M., 2010. Warm mix asphalt investigation. Kgs. Lyngby: Technical University of Denmark. Project conducted at Technical University of Denmark, Riga Technical University, 16–22.
   Google Scholar