Effect of aggregate types on the performance of neat and EVA-modified asphalt mixtures

REFERENCES

• Airey, G.D., 2002. Rheological evaluation of ethylene vinyl acetate polymer modified bitumens. Construction and Building Materials, 16 (8), 173–187.
   Google Scholar
• Aksoy, A., et al., 2005. Effects of various additives on the moisture damage sensitivity of asphalt mixtures. Construction and Building Materials, 19 (2), 11–18.
   Google Scholar
• Anagnos, J.N. and Kennedy, T.W., 1972. Practical method of conducting the indirect tensile test. Austin, TX: Centre of Highway Research, University of Texas at Austin Research Report 98–10.
   Google Scholar
• Bahia, H.U., et al., 2001. Development of binders specification based on characterization of damage behaviour. Proceedings of the association of asphalt paving technologists, Vol. 70, 442–464.
   Google Scholar
• Barton, A.F., 1983. Handbook of solubility parameters and other cohesion parameters. Boca Raton, FL: CRC Press.
   Google Scholar
• Brannan, C.J., et al., 1991. Adsorption behavior of asphalt models and asphalts on siliceous and calcareous aggregates. Transportation Research Record, 1323, 10–21.
   Google Scholar
• Chavez-Valencia, L.E., et al., 2007. Improving the compressive strengths of cold-mix asphalt using asphalt emulsion modified by polyvinyl acetate. Construction and Building Materials, 21 (3), 583–589.
   Web of Science ®Google Scholar
• Cheng, D.X., Little, D.N., and Lytton, R.L., 2003. Moisture damage evaluation of asphalt mixture by considering both moisture diffusion and repeated load conditions. TRB 2003 annual meeting CD ROM, 1–26.
   Google Scholar
• Chillingarian, G.V. and Yen, T.F., 2000. Asphaltenes and asphalts. Vol. 2. Amsterdam: Elsevier.
   Google Scholar
• Cortizo, M.S., et al., 2004. Effect of the thermal degradation of SBS copolymers during the ageing of modified asphalts. Polymer Degradation and Stability, 86 (2), 275–282.
   Web of Science ®Google Scholar
• Curtis, C.W., Jeon, Y.W., and Clapp, D.J., 1989a. Adsorption of asphalt functionalities and oxidized asphalts on aggregate surfaces. Fuel Science and Technology International, 7 (9), 1125–1268.
   Google Scholar
• Curtis, C.W., et al., 1989b. Adsorption behavior of asphalt functionalities, AC-20, and oxidized asphalts on aggregate surfaces. Transportation Research Record, 1228, 112–127.
   Google Scholar
• Garcia-Morales, M., 2004. Viscous properties and microstructure of recycled EVA modified bitumen. Fuel, 83 (1), 31–38.
   Web of Science ®Google Scholar
• Gonzales, O., Munoz, M.E., and Santamaria, A., 2004. Rheology and stability of bitumen/EVA blends. European Polymer Journal, 40 (10), 236–272.
   Google Scholar
• Graf, P.E., 1986. Factors affecting moisture susceptibility of asphalt concrete mixes. Proc. Association of Asphalt Paving Technologists, 55, 175–204.
   Google Scholar
• Haddadi, S., Ghorbel, E., and Laradi, N., 2008. Effects of the manufacturing process on the performances of the bituminous binders modified with EVA. Construction and Building Materials, 22 (6), 1212–1219.
   Web of Science ®Google Scholar
• Hameau, G. and Druon, M., 1976. Influence de copolymeres, statistiques et sequences, elastothermoplastiques sur les proprietes mecaniques des enrobes bitumineux. BLCPC (Republique Tunisienne), 81, 135–139.
   Google Scholar
• Hicks, R.G., 1991. NCHRP synthesis of highway practice 175: moisture damage in asphalt concrete. Washington, DC: TRB, National Research Council.
   Google Scholar
• Huang, Y.H., 1993. Pavement analysis and design. Englewood Cliffs, NJ: Prentice-Hall.
   Google Scholar
• Jain, P.K., et al., 1992. Characterization of polymer modified asphalt binders for roads and airfields. STP No. 1108.Philadelphia, PA: ASTM, 341–355.
   Google Scholar
• Kumar, P., Chandra, S., and Bose, S., 2006. Strength characteristics of polymer modified mixes. International Journal of Pavement Engineering, 7 (1), 63–71.
   Google Scholar
• Logaraj, S., 2002. Chemistry of asphalt‐aggregate interaction − influence of additives. Moisture damage symposium. Laramie, WY, 247–258.
   Google Scholar
• Lu, X. and Isacsson, U., 1999. Characterization of bitumens modified with SEBS, EVA and EBA polymers. Journal of Material Science, 34 (15), 3737–3745.
   Web of Science ®Google Scholar
• Mahabir, P. and Mazumdar, M., 1999. Engineering properties of EVA modified bitumen binder for paving mixes. Journal of Materials in Civil Engineering, 11 (2), 131–137.
   Web of Science ®Google Scholar
• Mertens, E.W. and Wright, J.R., 1959. Cationic emulsions: how they differ from Conventional emulsions in theory and practice. Highway Research Board, 38, 386–397.
   Google Scholar
• Monismith, C.L. and Tayebali, A.A., 1988. Permanent deformation (rutting) considerations in asphalt concrete pavement sections. Journal of the Association of Asphalt Paving Technologists, 57, 414–463.
   Google Scholar
• Petersen, J.C., et al., 1982. Chemistry of asphalt‐aggregate interaction: relationship with pavement moisture-damage prediction test. Transportation Research Record, 843, 95–104.
   Google Scholar
• Petersen, R., Anderson, D.A., and Button, J.W., 1994. Strategic highway research program, vol 3: physical characterization. SHRP-A-369.Washington: National Research Council.
   Google Scholar
• Punith, V.S. and Veeraragavan, A., 2007. Behavior of asphalt concrete mixtures with reclaimed polyethylene as additive. Journal of Materials in Civil Engineering, 19 (6), 500–507.
   Web of Science ®Google Scholar
• Puzinauskas, V.P. and Harrigan, E.T., 1990. Current refining practices for paving asphalt production. SHRP-A/FR-91-102. Strategic highway research program.Washington, D.C.National Research Council.
   Google Scholar
• Ramsamooj, D.V., Ramadan, J., and Lin, G.S., 1998. Model prediction of rutting in asphalt concrete. Journal of Transportation Engineering, 124 (5), 448–456.
   Web of Science ®Google Scholar
• Saoula, S., et al., 2009. Improvement of the performances of modified bituminous concrete with EVA and EVA-waste. Physics Procedia, 2 (3), 1319–1326.
   Google Scholar
• Sengoz, B. and Isikyakar, G., 2008. Evaluation of the properties and microstructure of SBS and EVA polymer modified bitumen. Construction and Building Materials, 22 (9), 1897–1905.
   Web of Science ®Google Scholar
• Shenoy, A.V., 2001. Determination of the temperature for mixing aggregates with polymer-modified asphalt. International Journal of Pavement Engineering, 2 (1), 33–47.
   Google Scholar
• Shuler, T., Hanson, D., and McKeen, R., 1992. Design and construction of asphalt concrete using polymer modified asphalt binders. In: K.R.Wardlaw and S.Shuler, eds. Polymer modified asphalt binders, ASTM STP 1108. Philadelphia, PA: ASTM, 97–129.
   Google Scholar
• Terrel, R.L. and Epps, J.A., 1989. Using additives and modifiers in hot mix asphalt, Part 1 of quality improvement series, Vol. 114.Lanham, MD: National Asphalt Pavement Association.
   Google Scholar