Effect of pavement design parameters on the behaviour of orthotropic steel bridge deck pavements under traffic loading

REFERENCES

• Alhassan, M., 2009. Bridge deck bonded concrete overlays: performance-based aspects and structural benefits. Saarbrücken, German: VDM Publishing.
   Google Scholar
• Applied Research Associates (ARA), 2004. Mechanistic-empirical design of new and rehabilitated pavement structures. NCHRP Report 1-37A.Washington, DC: Transportation Research Board, National Research Council.
   Google Scholar
• Bocci, E. and Canestrari, F., 2012. Analysis of structural compatibility at interface between asphalt concrete pavements and orthotropic steel deck surfaces. Transportation Research Record, 2293, 1–7.
   Google Scholar
• Bocci, E. and Canestrari, F., 2013. Experimental evaluation of the mechanical contribution of two special materials (or techniques) to the shear resistance of steel–asphalt interfaces. Transportation Research Record, 2370, 145–150.
   Google Scholar
• Chang, S.-P., 2004. Design and construction technology of cable supported steel bridges in Korea. Proceedings of 2004 Pacific structural steel conference, March 24–27, Long Beach, CA.
   Google Scholar
• Choi, J.-S., Jang, W.-H., and Kim, H.-S., 2007. Evaluation of the design of suspended bridge deck pavements using finite element method. Journal of Korean Society of Road Engineers, 9 (4), 88–97 (in Korean).
   Google Scholar
• Edwards, Y. and Westergren, P., 2001. Polymer modified waterproofing and pavement system for the high coast bridge in Sweden. VTI Report, Vol. 430. Linköping, Sweden: Swedish National Road and Transport Research Institute.
   Google Scholar
• Fowler, D.W. and Whitney, D.W., 2011. Long-term performance of polymer concrete for bridge decks. NCHRP Synthesis 423. Washington, DC: The National Academies Press, 6–7.
   Google Scholar
• Hansoo Inc., 2010. Strength of epoasphalt concrete mixtures. Technical Report, Korea (in Korean).
   Google Scholar
• Hicks, R.G., Dussek, I.J., and Seim, C., 2000. Asphalt surfaces on steel bridge decks. Transportation Research Record, 1740 (17), 135–142.
   Google Scholar
• Hou, W., Liu, X., and Pan, J., 2004. Achievements and prospects of long-span steel bridge construction in China. Proceedings of 2004 Pacific structural steel conference, March 24–27, Long Beach, CA.
   Google Scholar
• Hu, C.H. and Qian, J., 2011. Shear stress analysis of long-span steel bridge deck asphalt pavement using FEM. Advanced Materials Research, 304, 12–17.
   Google Scholar
• Huang, Y.H., 2004. Pavement analysis and design. 2nd ed.Englewood, NJ: Prentice Hall.
   Google Scholar
• Huang, W., et al., 2003. Epoxy asphalt concrete paving on the deck of long-span steel bridges. Chinese Science Bulletin, 48 (21), 2391–2394.
   Web of Science ®Google Scholar
• Huurman, M., et al., 2004. APT testing and 3D finite element analysis of asphalt surfacings on orthotropic steel deck bridges. Proceedings of international conference on accelerated pavement testing, September 26–29, Minneapolis, MN.
   Google Scholar
• Kim, H.B. and Lee, K.-H., 2009. An innovative rehabilitation approach for the bridge deck pavement. Geotechnical Special Publication, 196, 9–18.
   Google Scholar
• Kim, D.-Y., et al., 2010. Characterization of acryl polymer concretes for ultra thin overlays. Journal of Korean Society of Road Engineers, 12 (3), 1–8 (in Korean).
   Google Scholar
• Kim, T.W., et al., 2013. An evaluation of orthotropic steel bridge deck pavements behavior using wheel load testing and 3D finite element analysis. International Journal of Highway Engineering, 15 (1), 103–110 (in Korean).
   Google Scholar
• Lee, J.-Y., 2000. An interpretative study on movement characteristics of pavement and steel floor plate. Thesis (MS), Korea Maritime University (in Korean).
   Google Scholar
• Lee, H.-J., et al., 2004. Stress analysis in waterproof layer on steel bridge deck pavement using finite element analysis. Proceedings of 2004 Korean society of road engineers conference, October 15, Korea, 87–94 (in Korean).
   Google Scholar
• Li, X. and Chen, Y., 2009. New composite pavement system for orthotropic steel bridge decks. Proceedings of GeoHunan international conference 2009, Hunan, China, 75–84.
   Google Scholar
• Liu, X., et al., 2010. Characterization of surfacing materials for orthotropic steel deck bridges. Part 2: numerical work. International Journal of Pavement Engineering, 11 (3), 255–265.
   Web of Science ®Google Scholar
• Mangus, A.R., 2000. Existing movable bridges utilizing orthotropic bridge decks. Eight biennial symposium, FL, USA.
   Google Scholar
• Medani, T.O., 2006. Design principles of surfacings on orthotropic steel bridge decks. Thesis (PhD), Delft University of Technology.
   Google Scholar
• Nowak, A.S., 1994. Load model for bridge design code. Canadian Journal of Civil Engineering, 21 (1), 36–49.
   Web of Science ®Google Scholar
• Pfeifer, B.A. and Kowlaski, G., 1999. Evaluation of thin lift polymer bridge deck overlays on I-57 bridge at Clifton, IL. Report IL-PRR-132. Illinois Department of Transportation, Springfield, IL, USA.
   Google Scholar
• Pouget, S., et al., 2010. From the behavior of constituent materials to the calculation and design of orthotropic bridge structures. Road Materials and Pavement Design, 11 (suppl. 1), 111–144.
   Google Scholar
• Su, K., et al., 2008. Analysis of shear stress in asphalt pavements under actual measured tire-pavement contact pressure. Proceedings of the 6th ICPT Conference, Sapporo, Japan, 11–18.
   Google Scholar
• Wang, W. and He, H., 2011. Study on performance of epoxy asphalt concrete applied in the deck pavement of Pingsheng steel bridge. Advanced Materials Research, 150–151, 470–474.
   Google Scholar