An overview of the emerging warm mix asphalt technology

References

• Akisetty, C.K., et al., 2010a. Analysis of rheological properties of rubberized binders containing warm asphalt additives. Canadian Journal of Civil Engineering, 37, 763–771.
   Web of Science ®Google Scholar
• Akisetty, C.K., Lee, S.-J., and Amirkhanian, S.N., 2009a. Effects of compaction temperature on volumetric properties of rubberized mixes containing warm-mix additives. Journal of Materials in Civil Engineering, 21, 409–415.
   Web of Science ®Google Scholar
• Akisetty, C.K., Lee, S.-J., and Amirkhanian, S.N., 2009b. High temperature properties of rubberized binders containing warm asphalt additives. Construction and Building Materials, 23, 565–573.
   Web of Science ®Google Scholar
• Akisetty, C.K., Lee, S.-J., and Amirkhanian, S.N., 2010b. Laboratory investigation of the influence of warm asphalt additives on long-term performance properties of CRM binders. International Journal of Pavement Engineering, 11, 153–160.
   Web of Science ®Google Scholar
• Al-Qadi, I.L., Elseifi, M., and Carpenter, S.H., 2007. Reclaimed asphalt pavement – a literature review. Urbana, 51, 61801.
   Google Scholar
• Arega, Z., et al., 2011. Influence of warm-mix additives and reduced aging on the rheology of asphalt binders with different natural wax contents. Journal of Materials in Civil Engineering, 23, 1453–1459.
   Web of Science ®Google Scholar
• Association, N.A.P., 2007. Warm mix asphalt the wave of the future. Landham, MD: NAPA. Available from: http://www.warmmixasphalt.org [Accessed 6 January 2011].
   Google Scholar
• Banerjee, A., De Fortier Smit, A., and Prozzi, J.A., 2012. The effect of long-term aging on the rheology of warm mix asphalt binders. Fuel, 97, 603–611.
   Web of Science ®Google Scholar
• Barthel, W., Marchand, J., and Von Devivere, M., 2004. Warm asphalt mixes by adding a synthetic zeolite. Proceedings of the 3rd Eurasphalt and Eurobitume congress, 12–14 May 2004, Vienna Brussels: European Bitumen Association, 1241–1249.
   Google Scholar
• Bonaquist, R., 2011. Mix design practices for warm mix asphalt. Washington, DC: Transportation Research Board.
   Google Scholar
• Brown, D.C., 2008. Warm mix: the lights are green. HMAT: Hot Mix Asphalt Technology, 13, 20–32.
   Google Scholar
• Bueche, N., 2009. Warm asphalt bituminous mixtures with regards to energy, emissions and performance. Young Researchers Seminer (YRS), Torino.
   Google Scholar
• Buss, A.F., 2010. Investigation of warm-mix asphalt using Iowa aggregates. Thesis (Masters). Iowa State University.
   Google Scholar
• Button, J.W., Estakhri, C., and Wimsatt, A., 2007. A synthesis of warm mix asphalt. Texas: Southwest Region University Transportation Center, Texas Transportation Institute, Texas A&M University System.
   Google Scholar
• Capitão, S., Picado-Santos, L., and Martinho, F., 2012. Pavement engineering materials: review on the use of warm-mix asphalt. Construction and Building Materials, 36, 1016–1024.
   Web of Science ®Google Scholar
• Chowdhury, A. and Button, J.W., 2008. A review of warm mix asphalt. College Station, TX: Texas Transportation Institute, 1–4. Rep. No. SWUTC/08/473700-00080-1.
   Google Scholar
• Clariant, 2007. Road construction, [online]. Available from: http://www.clariant.com/C125720D002B963C/42D577152CA75AF2C125731B0045E2FD/$FILE/DA8229E_0607_BR_RoadConstruction.pdf [Accessed 5 October 2013].
   Google Scholar
• Corrigan, M., 2006. Warm mix asphalt technologies and research. Federal Highway Administration Office of Pavement Technology, 3, 26–28.
   Google Scholar
• D'Angelo, J.A., et al., 2008. Warm-mix asphalt: European Practice. Alexandria, VA: American Trade Initiatives, Rep. No. FHWA-PL-08-007.
   Google Scholar
• Daniel, J. and Fowler, J., 2006. Performance of warm mix asphalt. New Hampshire: New Hampshire Department of Transportation.
   Google Scholar
• Das, P.K., Tasdemir, Y., and Birgisson, B.R., 2012. Low temperature cracking performance of WMA with the use of the Superpave indirect tensile test. Construction and Building Materials, 30, 643–649.
   Web of Science ®Google Scholar
• Davidson, J.K., 2005a. Evotherm trial: Aurora, Ontario, August 8 2005. McAsphalt Engineering Services, Ontario.
   Google Scholar
• Davidson, J.K., 2005b. Evotherm trial: Ramara Township, Road 46 October 4, 5 2005. McAsphalt Engineering Services, Ontario.
   Google Scholar
• Davidson, J.K., 2006. Evotherm trial: City of Calgary, September 28 2005. McAsphalt Engineering Services, Ontario.
   Google Scholar
• Dinis-Almeida, M., Castro-Gomes, J., and Antunes, M.D.L., 2012. Mix design considerations for warm mix recycled asphalt with bitumen emulsion. Construction and Building Materials, 28, 687–693.
   Web of Science ®Google Scholar
• Edwards, Y., Tasdemir, Y., and Butt, A.A., 2010. Energy saving and environmental friendly wax concept for polymer modified mastic asphalt. Materials and Structures, 43, 123–131.
   Web of Science ®Google Scholar
• Edwards, Y., Tasdemir, Y., and Isacsson, U., 2006. Influence of commercial waxes and polyphosphoric acid on bitumen and asphalt concrete performance at low and medium temperatures. Materials and structures, 39, 725–737.
   Web of Science ®Google Scholar
• Gandhi, T., Akisetty, C., and Amirkhanian, S., 2009. Laboratory evaluation of warm asphalt binder aging characteristics. International Journal of Pavement Engineering, 10, 353–359.
   Web of Science ®Google Scholar
• Gandhi, T. and Amirkhanian, S., 2007. Laboratory investigation of warm asphalt binder properties – a preliminary analysised. Fifth international conference on maintenance and rehabilitation of pavements and technological proceedings. Iowa City: University of Iowa.
   Google Scholar
• Goh, S.W. and You, Z., 2008. Mechanical properties of warm mix asphalt using Aspha-min® ed. Transportation research board 87th annual meeting.
   Google Scholar
• Goh, S.W. and You, Z., 2011. Evaluation of warm mix asphalt produced at various temperatures through dynamic modulus testing and four point beam fatigue testinged. Pavements and Materials: Recent Advances in Design, Testing and Construction ASCE, 123–130.
   Google Scholar
• Goh, S.W., You, Z., and Van Dam, T.J., 2007. Laboratory evaluation and pavement design for warm mix asphalted. Proceedings of the 2007 Mid-Continent transportation research symposium, 1–11.
   Google Scholar
• Hamzah, M., Jamshidi, A., and Shahadan, Z., 2010a. Effects of Sasobit® on the required heat energy and CO2 emission on blended asphalt binder incorporated with aged binder. European Journal of Scientific Research, 42, 15–25.
   Google Scholar
• Hamzah, M.O., Jamshidi, A., and Shahadan, Z., 2010b. Evaluation of the potential of Sasobit® to reduce required heat energy and CO2 emission in the asphalt industry. Journal of Cleaner Production, 18, 1859–1865.
   Web of Science ®Google Scholar
• Harder, G.A., et al., 2008. Energy and environmental gains of warm and half-warm asphalt mix: quantitative approached. Transportation research board 87th annual meeting.
   Google Scholar
• Ho, S., Macleod, D., and Zanzotto, L., 2008. Our experience with the application of sasobit in polymer modified asphaltsed. Proceedings of the fifty-third annual conference of the Canadian Technical Asphalt Association (CTAA).
   Google Scholar
• Hofsink, W. and Barnard, M., 2009. SMA wearing courses on runways and taxiways: recent experience in South Africa. 30th international flexible pavements conference, Surfers Paradise, Queensland, Australia.
   Google Scholar
• Hossain, M.Z., 2011. Evaluation of rheological properties of asphalt binders for pavement design applications. Thesis (PhD). University of Oklahoma, Norman, Oklahoma, p. 260.
   Google Scholar
• Hurley, G.C. and Prowell, B.D., 2005a. Evaluation of Aspha-Min zeolite for use in warm mix asphalt. NCAT report, 05–04.
   Google Scholar
• Hurley, G.C. and Prowell, B.D., 2005b. Evaluation of Sasobit for use in warm mix asphalt. NCAT report, 05–06.
   Google Scholar
• Hurley, G.C. and Prowell, B.D., 2006a. Evaluation of Evotherm for use in warm mix asphalt. NCAT report 6.
   Google Scholar
• Hurley, G.C. and Prowell, B.D., 2006b. Evaluation of potential processes for use in warm mix asphalt. Journal of the Association of Asphalt Paving Technologists, 75, 41–90.
   Google Scholar
• Jamshidi, A., Hamzah, M.O., and You, Z., 2013. Performance of Warm Mix Asphalt containing Sasobit®: state-of-the-art. Construction and Building Materials, 38, 530–553.
   Web of Science ®Google Scholar
• Jones, W., 2004. Warm mix asphalt-a state-of-the-art review. Australian Asphalt Pavement Association Advisory Note, 17.
   Google Scholar
• Kandhal, P.S., 1992. Moisture susceptibility of HMA mixes: identification of problem and recommended solutions. National Asphalt Pavement Association, Auburn University, NCAT report, 92-01.
   Google Scholar
• Kandhal, P.S., 2010. Warm mix asphalt technologies: an overviewed. Journal of the Indian Roads Congress, 71 (2), 143–151.
   Google Scholar
• Kanitpong, K., et al., 2008. Evaluation of a warm-mix asphalt additive. Construction Materials, 161 (1), 1–8.
   Google Scholar
• Kanitpong, K., et al., 2007. Laboratory study on warm-mix asphalt additivesed. Transportation research board 86th annual meeting. Washington, DC, USA.
   Google Scholar
• Kim, H., Lee, S.-J., and Amirkhanian, S.N., 2010. Effects of warm mix asphalt additives on performance properties of polymer modified asphalt binders. Canadian Journal of Civil Engineering, 37, 17–24.
   Web of Science ®Google Scholar
• Kim, H., Lee, S.-J., and Amirkhanian, S.N., 2011. Rheology of warm mix asphalt binders with aged binders. Construction and Building Materials, 25, 183–189.
   Web of Science ®Google Scholar
• Kim, H., Lee, S.-J., and Amirkhanian, S.N., 2012. Influence of warm mix additives on PMA mixture properties. Journal of Transportation Engineering, 138, 991–997.
   Web of Science ®Google Scholar
• Koenders, B., et al., 2000. Innovative process in asphalt production and application to obtain lower operating temperaturesed. 2nd Eurasphalt & Eurobitumen congress, Barcelona, Spain.
   Google Scholar
• Koenders, B., et al., 2002. WAM-Foam, asphalt production at lower operating temperaturesed. Ninth international conference on asphalt pavements, Copenhagen, Denmark.
   Google Scholar
• Kristjansdottir, O., 2006. Warm mix asphalt for cold weather paving. Seattle, WA: University of Washington.
   Google Scholar
• Kristjánsdóttir, Ó., 2007. Warm mix asphalt technology adoptioned. NVF 33 annual meeting. Trondheim, Norway.
   Google Scholar
• Kuang, Y., 2012. Evaluation of Evotherm as a WMA technology compaction and anti-strip additive. Thesis (Master). Iowa State University, Ames, p. 154.
   Google Scholar
• Kvasnak, A., et al., 2010. Evaluation of gencor green machine Ultrafoam GX final report.
   Google Scholar
• Larsen, O., et al., 2004. WAM Foam asphalt production at lower operating temperatures as an environmental friendly alternative to HMAed. 3rd Eurasphalt & Eurobitume congress, Vienna.
   Google Scholar
• Li, M., et al., 2011. Testing and evaluation of sasobit on the performances of asphalt rubbered. ICCTP 2011: towards sustainable transportation systems, 3502–3509. doi: 10.1061/41186(421)347.
   Google Scholar
• Liu, J. and Li, P., 2011. Low temperature performance of sasobit-modified warm-mix asphalt. Journal of Materials in Civil Engineering, 24, 57–63.
   Web of Science ®Google Scholar
• Liu, J., et al., 2011. Laboratory evaluation of sasobit-modified warm-mix asphalt for alaskan conditions. Journal of Materials in Civil Engineering, 23, 1498–1505.
   Web of Science ®Google Scholar
• Liu, S., et al., 2009. Variance analysis and performance evaluation of different crumb rubber modified (CRM) asphalt. Construction and Building Materials, 23, 2701–2708.
   Web of Science ®Google Scholar
• Liu, Z., Wen, J., and Wu, S., 2010. Influence of warm mix asphalt additive on temperature susceptibility of asphalt bindersed. Bioinformatics and biomedical engineering (iCBBE), 2010 4th International Conference on IEEE, 1–4.
   Google Scholar
• Losa, M., et al., 2009. Experimental characterization of high performance WAM-Foam trial sectionsed. Sixth international conference on maintenance and rehabilitation of pavements and technological control (MAIREPAV6). Torino, Italy: Politecnico di Torino.
   Google Scholar
• Mallick, R.B., Kandhal, P.S., and Bradbury, R.L., 2008. Using warm-mix asphalt technology to incorporate high percentage of reclaimed asphalt pavement material in asphalt mixtures. Transportation Research Record: Journal of the Transportation Research Board, 2051, 71–79.
   Web of Science ®Google Scholar
• MeadWestvaco, 2012. [online]. Available from: http://www.meadwestvaco.com/SpecialtyChemicals/AsphaltAdditives/MWV002106.
   Google Scholar
• Middleton, B. and Forfylow, R.W., 2009. Evaluation of warm-mix asphalt produced with the double barrel green process. Transportation Research Record: Journal of the Transportation Research Board, 2126, 19–26.
   Web of Science ®Google Scholar
• Naidoo, P., 2005. Fischer-tropsch hard wax chemistry in “warm mix asphalt” Applications. Petersen asphalt research conference, abstract and presentation slides.
   Google Scholar
• Perkins, S.W., 2009. Synthesis of warm mix asphalt paving strategies for use in Montana highway construction. Helena, Montana: Montana Department of Transportation. FHWA Report No. FHWA/MT-09-009/8117-38.
   Google Scholar
• PQ-Corporations, 2010. Advera® WMA Aluminosilicate, [online]. Available from: http://www.pqcorp.com/msds/advera_wma_ansi_msds.pdf.
   Google Scholar
• Prowell, B.D., 2007. The international technology scanning program warm mix asphalt scan summary report. Washington, DC: Federal Highway Administration, US Department of Transportation.
   Google Scholar
• Prowell, B.D. and Hurley, G.C., 2005. Starting to warm. Roads and Bridges, 42, 9.
   Google Scholar
• Prowell, B.D., Hurley, G.C., and Frank, B., 2007. Warm-mix asphalt: best practices. Lanham, MD: National Asphalt Pavement Association.
   Google Scholar
• Rodríguez-Alloza, A.M., Gallego, J., and Pérez, I., 2013. Study of the effect of four warm mix asphalt additives on bitumen modified with 15% crumb rubber. Construction and Building Materials, 43, 300–308.
   Web of Science ®Google Scholar
• Rubio, M.C., et al., 2012. Warm mix asphalt: an overview. Journal of Cleaner Production, 24, 76–84.
   Web of Science ®Google Scholar
• Rubio, M.D.C., et al., 2013. Comparative analysis of emissions from the manufacture and use of hot and half-warm mix asphalt. Journal of Cleaner Production, 41, 1–6.
   Web of Science ®Google Scholar
• Sargand, S., Nazzal, M.D., Al-Rawashdeh, A., and Powers, D., 2011. Field evaluation of warm-mix asphalt technologies. Journal of Materials in Civil Engineering, 24, 1343–1349.
   Web of Science ®Google Scholar
• Sengoz, B. and Oylumluoglu, J., 2013. Utilization of recycled asphalt concrete with different warm mix asphalt additives prepared with different penetration grades bitumen. Construction and Building Materials, 45, 173–183.
   Web of Science ®Google Scholar
• Shu, X., Huang, B., Shrum, E.D., and Jia, X., 2012. Laboratory evaluation of moisture susceptibility of foamed warm mix asphalt containing high percentages of RAP. Construction and Building Materials, 35, 125–130.
   Web of Science ®Google Scholar
• Silva, H.M., et al., 2010. Optimization of warm mix asphalts using different blends of binders and synthetic paraffin wax contents. Construction and Building Materials, 24, 1621–1631.
   Web of Science ®Google Scholar
• Soto, J., 2008. Warm in-plant recycling with bituminous emulsionsed. Proceedings of the 4th Eurasphalt and Eurobitume congress, May 2008, Copenhagen, Denmark.
   Google Scholar
• Tao, M. and Mallick, R.B., 2009. Effects of warm-mix asphalt additives on workability and mechanical properties of reclaimed asphalt pavement material. Transportation Research Record: Journal of the Transportation Research Board, 2126, 151–160.
   Web of Science ®Google Scholar
• Vaitkus, A., et al., 2009a. Analysis and evaluation of possibilities for the use of warm mix asphalt in Lithuania. Baltic Journal of Road and Bridge Engineering, 4, 80–86.
   Web of Science ®Google Scholar
• Vaitkus, A., Vorobjovas, V., and Ziliute, L., 2009b. The Research on the use of warm mix asphalt for asphalt pavement structuresed. XXVII international Baltic road conference. Riga, Latvia.
   Google Scholar
• Wasiuddin, N.M., et al., 2007. Comparative laboratory study of sasobit and aspha-min additives in warm-mix asphalt. Transportation Research Record: Journal of the Transportation Research Board, 1998, 82–88.
   Web of Science ®Google Scholar
• Willis, J.R., et al., 2011. Combining warm mix asphalt technologies with mixtures containing reclaimed asphalt pavement. 2nd international warm-mix conference. St Louis, Missouri. October 11–13.
   Google Scholar
• Xiao, F., 2006. Development of fatigue predictive models of rubberized asphalt concrete (RAC) containing reclaimed asphalt pavement (RAP) mixtures. Clemson, SC: Clemson University.
   Google Scholar
• Xiao, F., Amirkhanian, S., and Juang, C.H., 2007. Rutting resistance of rubberized asphalt concrete pavements containing reclaimed asphalt pavement mixtures. Journal of Materials in Civil Engineering, 19, 475–483.
   Web of Science ®Google Scholar
• Xiao, F., Amirkhanian, S.N., and Putman, B.J., 2010. Evaluation of rutting resistance in warm-mix asphalts containing moist aggregate. Transportation Research Record: Journal of the Transportation Research Board, 2180, 75–84.
   Web of Science ®Google Scholar
• Xiao, F., Amirkhanian, S.N., and Shen, J., 2009a. Effects of various long-term aging procedures on the rheological properties of laboratory prepared rubberized asphalt binders. Journal of Testing and Evaluation, 37, 1.
   Web of Science ®Google Scholar
• Xiao, F., Amirkhanian, S.N., and Zhang, R., 2011. Influence of short-term aging on rheological characteristics of non-foaming WMA binders. Journal of Performance of Constructed Facilities, 26, 145–152.
   Web of Science ®Google Scholar
• Xiao, F., Punith, V., and Amirkhanian, S.N., 2012a. Effects of non-foaming WMA additives on asphalt binders at high performance temperatures. Fuel, 94, 144–155.
   Web of Science ®Google Scholar
• Xiao, F., et al., 2012b. Improved resistance of long term aged warm mix asphalt to moisture damage containing moist aggregates. Journal of Materials in Civil Engineering, 25 (7), 913–922.
   Web of Science ®Google Scholar
• Xiao, F., Wenbin Zhao, P., and Amirkhanian, S.N., 2009b. Fatigue behavior of rubberized asphalt concrete mixtures containing warm asphalt additives. Construction and Building Materials, 23, 3144–3151.
   Web of Science ®Google Scholar
• Yildirim, Y., 2007. Polymer modified asphalt binders. Construction and Building Materials, 21, 66–72.
   Web of Science ®Google Scholar
• Yoo, M.-Y., et al., 2011. Low-temperature fracture characteristics of selected warm-mix asphalt concretes. Transportation Research Record: Journal of the Transportation Research Board, 2208, 40–47.
   Web of Science ®Google Scholar
• Zaumanis, M., 2010. Warm mix asphalt investigation. Kgs. Lyngby: Technical University of Denmark. Project conducted at Technical University of Denmark, Riga Technical University, 16–22.
   Google Scholar
• Zhang, J., 2010. Effects of warm-mix asphalt additives on asphalt mixture characteristics and pavement performance. University of Nebraska, Lincoln. p. 89.
   Google Scholar
• Zhao, S., et al., 2012. Laboratory performance evaluation of warm mix asphalt containing high percentages of RAP. 91th transportation research board annual meeting, paper.
   Google Scholar
• Zhao, S., et al., 2013. Comparative evaluation of warm mix asphalt containing high percentages of reclaimed asphalt pavement. Construction and Building Materials, 44, 92–100.
   Web of Science ®Google Scholar