References
- Abdelrahman, M.A. and Carpenter, S.H., 1999. The mechanism of the interaction of asphalt cement with crumb rubber modifier (CRM). Transportation Research Record, 1661, 106–113.
- Asphalt Institute, 1974. Mix design methods for asphalt concrete and other hot-mix types, Manual Series No. 2 (MS-2).6th ed.Lexington, KY: Asphalt Institute.
- Asphalt Institute, 2003. Superpave mix designs, Superpave Series No. 2 SP-2.3rd ed.Lexington, KY: Asphalt Institute.
- ASTM, 2006. Standard test method for viscosity determination of asphalt at elevated temperatures using a rotational viscometer. ASTM D-4402West Conshohocken, PA: ASTM International.
- ASTM, 2009. Standard viscosity temperature chart for asphalts, ASTM D2493, Annual Book of ASTM Standards 05.01 (Petroleum Products and Lubricants)West Conshohocken, PA: ASTM.
- Attia, M. and Abdelrahman, M.A., 2009. Enhancing the performance of crumb rubber modified binders through varying the interaction conditions. International Journal of Pavement Engineering, 10, 1–12.
- Bahia, H.U., et al., 2001. Characterization of modified asphalt binders in superpave mix design, National Cooperative Highway Research Program (NCHRP)–459,Washington, DC: Transportation Research Board, National Research Council, National Academy Press.
- Barr, G., 1931. A monograph of viscometry. London: Oxford University Press.
- Beard, D.W., Davies, M.H., and Walters, K., 1966. The stability of elastico-viscous flow between rotating cylinders – Part 3. Overstability in viscous and Maxwell fluids. Journal of Fluid Mechanics, 24 (2), 321–334.
- Bird, R.B., Armstrong, R.C., and Hassager, O., 1987. Dynamic of polymeric fluids, fluid mechanics. New York, NY: Wiley–Interscience Publication.
- BIS, 2006. Indian standard paving bitumen – specification. 3rd revision. New Delhi: Bureau of Indian Standards.
- BIS, 2004. Polymer and rubber modified bitumen – specification. New Delhi: Bureau of Indian Standards.
- Brookfield Engineering Laboratories, Inc., 2005. More solutions to sticky problems, Technical Report, USA.
- Celik, O.N. and Atis, C.D., 2008. Compactibility of hot bituminous mixtures made with crumb rubber-modified binders. Construction and Building Materials, 22, 1143–1147.
- Cho, D., Bahia, H.U., and Kamel, N., 2006. Critical evaluation of use of the procedure of superpave volumetric mixture design for modified binders. Transportation Research Record, 1929, 114–125.
- Chockalingam, K., Saravanan, U., and Krishnan, J.M., 2010. Characterization of petroleum pitch using steady shear experiments. International Journal of Engineering Science, 48, 1092–1109.
- Delgadillo, R. and Bahia, H.U., 2008. Effects of temperature and pressure on hot mixed asphalt compaction: field and laboratory study. ASCE Journal of Materials in Civil Engineering, 440–448.
- Giesekus, V.H., 1966. Zur Stabilität von Strömungen Viskoelastischer Flüssigkeiten 1. Ebene und kreisförmige Couette-Strömung. Rheologica Acta, 5, 239–252.
- Khatri, A., Bahia, H.U., and Hanson, D., 2001. Mixing and compaction temperatures for modified binders using the superpave gyratory compactor. Proceedings of the Association of Asphalt Paving Technologists, 70, 368–402.
- Koneru, S., Masad, E., and Rajagopal, K.R., 2008. A thermomechanical framework for modeling the compaction of asphalt mixes. Mechanics of Materials, 40, 846–864.
- Kraus, G., 1982. Modification of asphalt by block polymers of butadiene and styrene. Rubber Chemistry and Technology, 55 (5), 1386–1402.
- Lee, S.J., Amirkhanian, S.N., and Kwon, S.Z., 2008. The effects of compaction temperature on CRM mixtures made with the SGC and the Marshall compactor. Construction and Building Materials, 22, 1122–1128.
- Lu, X. and Isacsson, U., 1997. Influence of styrene–butadiene–styrene polymer modification on asphalt viscosity. Fuel, 76, 1353–1359.
- Masad, E., Muhunthan, B., Shashidhar, N., and Harman, T., 1999. Internal structure characterization of asphalt concrete using image analysis. ASCE Journal of Computing in Civil Engineering, 13 (2), 88–95.
- Marvillet, J. and Bougalt, P., 1978. Workability of bituminous mixes. Development of a workability meter. Proceedings of the Association of Asphalt Paving Technologists, 48, 91–110.
- Morales, M.G., and et al., 2004. Viscous properties and micro-structure of recycled eva modified bitumen. Fuel, 83, 31–38.
- Muller, S.J., Larson, R.G., and Shaqfeh, E.S.G., 1989. A purely elastc transition in Taylor–Couette flow. Rheologica Acta, 28, 499–503.
- Nijboer, L.W., 1948. Plasticity as a factor in the design of dense bituminous carpets. Amsterdam: Elsevier.
- Polacco, G., and et al., 2006. Relation between polymer architecture and nonlinear viscoelastic behavior of modified asphalts. Current Opinion in Colloid & Interface Science, 11, 230–245.
- Powell, W.D., Lister, N.W., and Leech, D., 1981. Improved compaction of dense graded bituminous macadams. Proceedings of the Association of Asphalt Paving Technologists, 50, 394–416.
- Rajagopal, K.R. and Srinivasa, A.R., 2010. A Gibbs-potential-based formulation for obtaining the response functions for a class of viscoelastic materials. Proceedings of the Royal Society A: Mathematical, Physical and Engineering Science, 467, 39–58.
- Rickards, I., and et al., 1999. Practical realization of a new concept for asphalt compaction. Transportation Research Record, 1654, 27–35.
- Shenoy, A., 2001. Determination of the temperature for mixing aggregates with polymer-modified asphalts. International Journal Pavement Engineering, 2 (1), 33–47.
- Stastna, J., Zanzotto, L., and Vacin, O.J., 2003. Viscosity function in polymer-modified asphalts. Journal of Colloid and Interface Science, 259, 200–207.
- West, R.C., and et al., 2010. Mixing and compaction temperatures of asphalt binders in hot-mix asphalt. Washington, DC: Transportation Research Board. NCHRP Report 648.
- Yildirim, Y. and Kennedy, T.W., 2003. Calculation of shear rate on asphalt binder in the superpave gyratory compactor. Turkish Journal of Engineering and Environmental Science, 27 (6), 375–381.
- Yildirim, Y., Ideker, J., and Hazlett, D., 2006. Evaluation of viscosity values for mixing and compaction temperatures. ASCE Journal of Materials in Civil Engineering, 18, 545–553.