References
- Allen, R., Little, D., and Bhasin, A., 2012. Structural characterization of micromechanical properties in asphalt using atomic force microscopy. Journal of Materials in Civil Engineering, 24, 1317–1327.
- Allen, R.G., 2013. Microstructural characterization of the chemomechanical behavior of asphalt in terms of aging and fatigue performance properties. Thesis (PhD). Texas A&M University.
- Allen, R.G., et al., 2013. The effects of chemical composition on asphalt microstructure and their association to pavement performance. International Journal of Pavement Engineering, 15 (1), 1–14.
- Dai, Q., 2010. Two- and three-dimensional micromechanical viscoelastic finite element modeling of stone-based materials with X-ray computed tomography images. Construction and Building Materials, 25 (2), 1102–1114.
- Das, P.K., et al., 2013. Micromechanical investigation of phase separation in bitumen by combining atomic force microscopy with differential scanning calorimetry results. Road Materials and Pavement Design, 14, 25–37.
- Dourado, E.R., Simao, R.A., and Leite, L.F.M., 2011. Mechanical properties of asphalt binders evaluated by atomic force microscopy. Journal of Microscopy, 245, 119–128.
- Eberl, C., et al., 2006. Ultra high-cycle fatigue in pure Al films and line structures. Materials Science and Engineering, 421, 68–76.
- Fischer-Cripps, A.C., 2004. A simple phenomenological approach to nanoindentation creep. CSIRO Division of Telecommunications and Industrial Physics, 385 (1), 74–82.
- Galin, L.A., 1953. Contact problems in theory of elasticity. Moscow: Gostekhizdat.
- Hertz, H.1896. Miscellaneous Papers. New York: McMillan and Company.
- Jager, A., et al., 2004. Identification of microstructural components of bitumen by mean of atomic force microscopy (AFM). Proceedings in Applied Mathematics and Mechanics, 4, 400–401.
- Jones, C.A. and Grasley, Z.C., 2011. Short-term creep of cement paste during nanoindentation. Cement and Concrete Composites, 33 (1), 12–18.
- Kringos, N., et al., 2009. A finite element based chemo-mechanical model to simulate healing of bitumen. In: Chemo-mechanics of bituminous materials. Delft, Netherlands: TU Delft, 69–75.
- Larsen, K.P., et al., 2003. MEMS device for bending test: measurements of fatigue and creep of electroplated nickel. Sensors and Actuators A, 103, 156–164.
- Lee, E. and Radok, J., 1960. The contact problem for viscoelastic bodies. Journal of Applied Mechanics–Transactions of the ASME, 27, 438–444.
- Loeber, L., et al., 1996. New direct observations of asphalts and asphalt binders by scanning electron microscopy and atomic force microscopy. Journal of Microscopy, 182 (1), 32–39.
- Loeber, L., et al., 1998. Bitumen in colloid science: a chemical, structural and rheological approach. Fuel, 77 (13), 1443–1450.
- Marek, C.M. and Herrin, M., 1958. Tensile behavior and failure characteristics of asphalt cements in thin films. Proceedings of the association of asphalt Pavint technologists, 37, 386–421.
- Masad, E. and Somadevan, N., 2002. Microstructural finite-element analysis of influence of localized strain distribution on asphalt mix properties. Journal of Engineering Mechanics, 128 (10), 1105–1114.
- Masad, E., et al., 2001. Modeling and experimental measurements of strain distribution in asphalt mixes. Journal of Transportation Engineering, 127 (6), 477–485.
- Masson, J.F., Leblond, V., and Margeson, J., 2005. Bitumen morphologies by phase-detection atomic force microscopy. Journal of Microscopy, 221 (1), 17–29.
- Masson, J.F., Leblond, V., and Margeson, J., 2007. Low-temperature bitumen stiffness and viscous paraffinic nano- and micro-domains by cryogenic AFM and PDM. Journal of Microscopy, 227 (3), 191–202.
- Mo, L., et al., 2008. 2D and 3D meso-scale finite element models for ravelling analysis of porous asphalt concrete. Finite Elements in Analysis and Design, 44, 186–196.
- Modlinski, R., et al., 2004. Creep as reliability problem in MEMS. Microelectronics Reliability, 44, 1733–1738.
- Park, J.H., Kim, Y.J., and Choa, S.H., 2006. Mechanical properties of AL-3 thin films for reliability analysis of RF MEMS switch. Key Engineering Materials, 306, 1319–1324.
- Paryab, N., Jahed, H., and Khajepour, A., 2006. Failure mechanisms of MEMS thermal actuators. In: Proceedings of the AME IMECE. New York, NY: American Society of Mechanical Engineers, 397–406.
- Pauli, A.T. and Grimes, R.W., 2003. Surface morphological stability modeling of SHRP asphalts. ACS Division of Fuel Chemistry Preprints, 1, 19–23.
- Pauli, A., et al., 2001. Atomic force microscopy investigation of SHRP asphalts. Symposium on heavy oil and resid compatiblity and stability. San Diego, CA: Division of Petroleum Chemistry, American Chemical Society, 110–114.
- Pauli, A.T., et al., 2011. Morphology of asphalts, asphalt fractions and model wax-doped asphalts studied by atomic force microscopy. International Journal of Pavement Engineering, 12 (4), 291–309.
- Poulikakos, L.D. and Partl, M.N., 2011. Micro scale tensile behaviour of thin bitumen films. Experimental Mechanics, 51, 1171–1183.
- Sneddon, I., 1965. The relation between load and penetration in the axisymmetric boussinesq problem for a punch of arbitrary profile. International Journal of Engineering Science, 3 (638), 47–57.
- Sontheimer, A.B., 2002. Digital micromirror device (DMD) hinge memory lifetime reliability modeling. Proceedings of IEEE international reliability physics symposium. Dallas, TX: IEEE.
- Sultana, S., Bhasin, A., and Liechti, K.M., 2014. Rate and confinement effects on the tensile strength of asphalt binder. Construction and Building Materials, 53, 604–611.
- Tarefder, R.A., Zaman, A.M., and Uddin, W., 2010. Determining hardness and elastic modulus of asphalt nanoindentation. International Journal of Geometchanics, 10, 106–116.
- Tuck, K., et al., 2005. A study of creep in polysilicon MEMS devices. Journal of Engineering Materials and Technology, 127, 90–96.
- Vandamme, M. and Ulm, F., 2006. Viscoelastic solutions for conical indentation. International Journal of Solids and Structures, 43 (10), 3142–3165.
- You, T., et al., 2011. Three-dimensional microstructural modeling of asphalt concrete using a unified viscoelastic-viscoplastic–viscodamage model. Construction and Building Materials, 28, 531–548.