Experimental investigation of seashells used as filler in hot mix asphalt

References

• AASHTO. T 283, 2007. Standard method of test for resistance of compacted hot mix asphalt (HMA) to moisture-induced damage. AASHTO Standards, T 283, Washington, DC.
   Google Scholar
• Akbulut, H. and Guler, C., 2007. Use of aggregates produced from marble quarry waste in asphalt pavements. Building and Environment, 42 (5), 1921–1930.
   Web of Science ®Google Scholar
• Al-Hadidy, A.I. and Yi-qiu, T., 2009. Effect of polyethylene on life of flexible pavements. Construction and Building Materials, 23 (3), 1456–1464.
   Web of Science ®Google Scholar
• Alvarez, A.E., Ovalles, E., and Caro, S., 2012. Assessment of the effect of mineral filler on asphalt–aggregate interfaces based on thermodynamic properties. Construction and Building Materials, 28 (1), 599–606.
   Web of Science ®Google Scholar
• Arabani, M. and Azarhoosh, A.R., 2012. The effect of recycled concrete aggregate and steel slag on the dynamic properties of asphalt mixtures. Construction and Building Materials, 35 (10), 1–7.
   Google Scholar
• Arabani, M., et al., 2013. Laboratory evaluation of recycled waste concrete into asphalt mixtures. International Journal of Pavement Engineering, 14 (6), 531–539.
   Web of Science ®Google Scholar
• ASTM, D 1074, 2000. Annual book of ASTM standards: Road and paving materials. Vol. 04.03, West Conshohocken, PA.
   Google Scholar
• Bezerra, U.T., et al., 2011. Production of filler aggregate from waste of bivalves mollusks shells. Journal of Civil Engineering and Architecture, 5 (4), 363–367.
   Google Scholar
• Bouchard, G.P., 1992. Effects of aggregate absorption and crush percentage on bituminous concrete, effect of aggregates and mineral fillers on asphalt mixtures performance. In: R.C. Meininger, ed. ASTM STP 1147. Philadelphia, PA: American Society for Testing and Material.
   Google Scholar
• Chen, M., et al., 2011a. Utilization of recycled brick powder as alternative filler in asphalt mixture. Construction and Building Materials, 25 (4), 1532–1536.
   Web of Science ®Google Scholar
• Chen, M., Lin, J., and Shaopeng, W., 2011b. Potential of recycled fine aggregates powder as filler in asphalt mixture. Construction and Building Materials, 25 (10), 3909–3914.
   Web of Science ®Google Scholar
• Chui-Te, C., 2008. Use of ground tire rubber in asphalt pavements: field trial and evaluation in Taiwan. Resources, Conservation and Recycling, 52 (1), 522–532.
   Google Scholar
• Fritschy, G. and Papirer, E., 1979. Dynamic-mechanical properties of a bitumen–silica composite: I. Relation with filler content and bitumen–silica interfacial area. Rheol Acta, 18 (6), 749–755.
   Web of Science ®Google Scholar
• Garcia, I., et al., 2009. Tests on mortars and concrete made with seashells as aggregate. Case study in Mauritania. In: 11th international conference on non-conventional materials and technologies, Emerald Group Publishing Limited, Howard House Wagon Lane Bingley BD16 1WA, UK.
   Google Scholar
• Gugiuman, G.H., 1996. The building of the roads. Bucharest: Technical Publishing House.
   Google Scholar
• Jianying, Y., Peiliang, C., and Shaopeng, W., 2009. Investigation of the properties of asphalt and its mixtures containing flame retardant modifier. Construction and Building Materials, 23 (6), 2277–2282.
   Web of Science ®Google Scholar
• Kandhal, P.S., Parker, F., and Mallick, R.B., 1977. Aggregate tests for hot mix asphalt: state of the practice. National Center for Asphalt Technology (NCAT) Report, 97–06.
   Google Scholar
• Karasahin, M. and Terzi, S., 2007. Evaluation of marble waste dust in the mixture of asphalt concrete. Construction and Building Materials, 21 (3), 616–620.
   Web of Science ®Google Scholar
• Kim, S., 2003. Mechanistic Evaluation of mineral fillers on fatigue resistance and fundamental material characteristics. Paper submitted to the Transportation Research Board for Presentation and Publication at the annual meeting in Washington, DC.
   Google Scholar
• Lottman, R.P., 2001. Predicting moisture-induced damage to asphaltic concrete. Washington, DC: Transportation Research Board. NCHRP Report 192.
   Google Scholar
• Moghadas Nejad, F., et al., 2012. Influence of using nonmaterial to reduce the moisture susceptibility of hot mix asphalt. Construction and Building Materials, 31 (6), 384–388.
   Web of Science ®Google Scholar
• Monismith, L., 1994. Fatigue response of asphalt–aggregate mixer. Asphalt Research Program, Institute of Transportation Studies. Berkeley: University of California. SHRP-A-404.
   Google Scholar
• Nicoara, L. and Costescu, I., 1992. The building of the roads. Bucharest: Editorial Trefla.
   Google Scholar
• Roberts, F.L., et al., 1996. Hot mix asphalt materials, mixture design, and construction. 2nd ed. Lanham, MD: NAPA Education Foundation.
   Google Scholar
• Shu, X., Huang, B., and Vukosavljevic, D., 2008. Laboratory evaluation of fatigue characteristics of recycled asphalt mixture. Construction and Building Materials, 22 (7), 1323–1330.
   Web of Science ®Google Scholar
• Uzun, I. and Terzi, S., 2012. Evaluation of andesite waste as mineral filler in asphaltic concrete mixture. Construction and Building Materials, 31 (6), 284–288.
   Web of Science ®Google Scholar
• Witczak, M.W. and El-Basyouny, M.M., 2004. Calibration of fatigue cracking models for flexible pavements. National Cooperative Highway Research Program (NCHRP) APPENDIX II-1, Transportation Research Board of the National Academies, Washington, DC.
   Google Scholar
• Yamaguchi, K., Sasaki, I., and Nishizaki, I., 2005. Effects of film thickness, wavelength and carbon black on photodegradation of asphalt. Journal of the Japan Petroleum Institute, 48 (3), 150–155.
   Web of Science ®Google Scholar