Degraded secant modulus for permanent deformation of soils

References

• AASHTO, 1972. AASHTO interim guide for design of pavement structures. Washington, DC: American Association of State Highway and Transportation Officials.
   Google Scholar
• AASHTO, 1986. Guide for design of pavement structures. Washington, DC: American Association of State Highway and Transportation Officials.
   Google Scholar
• Ahn, J., et al., 2009. Inverse analysis of plate load tests to assess subgrade resilient modulus. Transportation Research Record: Journal of the Transportation Research Board, 2101, 110–117.
   Web of Science ®Google Scholar
• AMADEUS, 2000. Advanced models for analytical design of European pavement structures. Final Report, No.: RO-97-SC.2137, European Commission, Brussels, Belgium.
   Google Scholar
• AASHTO, 1999. Standard method of test for determining the resilient modulus of soils and aggregate materials. Report No.: AASHTO T 307. Washington, DC: American Association of State Highway and Transportation Officials.
   Google Scholar
• Achmus, M., Kuo, Y., and Abdel-Rahman, K., 2009. Behavior of monopile foundations under cyclic lateral load. Computers and Geotechnics, 36 (5), 725–735.
   Web of Science ®Google Scholar
• Cote, B.M., 2009. Performance comparison of mechanical and chemical stabilization of undercut subgrades. Dissertation. North Carolina State University.
   Google Scholar
• Cote, B., et al., 2010. Laboratory performance comparison of stabilized undercut subgrade under cyclic loading. ASTM Geotechnical Testing Journal, 33 (6), 453–462.
   Web of Science ®Google Scholar
• Geokon, 2013. Geokon, Inc. Available from: http://www.geokon.com/ [Accessed February 2013].
   Google Scholar
• Kausel, E. and Roesset, J.M., 1975. Dynamic stiffness of circular foundations. Journal of the Engineering Mechanics Division, 101 (6), 771–785.
   Web of Science ®Google Scholar
• Kenis, W.J., 1978. Predictive design procedures, VESYS users manual: an interim design method for flexible pavements using the vesys structural subsystem. Final Report Federal Highway Administration Washington, DC: 1.
   Google Scholar
• KPRP, 2011. Guide for design of road pavement structures. Korea pavement research program. Korea Ministry of Land, Transportation and Maritime Affairs, Sejong, Korea.
   Google Scholar
• Lesny, K. and Hinz, P., 2007. Investigation of monopile behaviour under cyclic lateral loading. In: Offshore site investigation and geotechnics, confronting new challenges and sharing knowledge, 11–13 Sep. 2007, London, UK, 383–390.
   Google Scholar
• Levenberg, K., 1944. A method for the solution of certain problems in least squares. Quarterly of Applied Mathematics, 2, 164–168.
   Google Scholar
• LTPP, 1996. Resilient modulus of unbound granular base/subbase materials and subgrade soils. Long-Term Pavement Performance P46, Federal Highway Administration, Washington, DC.
   Google Scholar
• Marquardt, D.W., 1963. An algorithm for least-squares estimation of nonlinear parameters. Journal of the Society for Industrial & Applied Mathematics, 11 (2), 431–441.
   Web of Science ®Google Scholar
• NCHRP, 2003. Harmonized test methods for laboratory determination of resilient modulus for flexible pavement design. National Cooperative Highway Research Program. Report No.: NCHRP 1-28A. Washington, DC: Transportation Research Board.
   Google Scholar
• NCHRP, 2004. Guide for mechanistic-empirical design of new and rehavilitated pavement structures. National Cooperative Highway Research Program. Report No.: NCHRP 1–37A. Washington, DC: Transportation Research Board.
   Google Scholar
• NCHRP, 2004. Appendix GG-1: Calibration of permanent deformation models for flexible pavements, guide for mechanistic-empirical design of new and rehabilitated pavement structures. National Cooperative Highway Research Program. Report No.: NCHRP 1-37A. Washington, DC: Transportation Research Board.
   Google Scholar
• Oh, J.H., 2004. Field monitoring and modeling of pavement response and service life consumption due to overweight truck traffic. Dissertation. Texas A&M University.
   Google Scholar
• Oh, J., Fernando, E.G., and Lee, W., 2010. Consideration of moisture effect on load bearing capacity in Texas flexible pavements. KSCE Journal of Civil Engineering, 14 (4), 493–501.
   Web of Science ®Google Scholar
• Puppala, A.J., Mohammad, L.N., and Allen, A., 1999. Permanent deformation characterization of subgrade soils from RLT test. Journal of Materials in Civil Engineering, 11 (4), 274–282.
   Web of Science ®Google Scholar
• Puppala, A.J., Saride, S., and Chomtid, S., 2009. Experimental and modeling studies of permanent strains of subgrade soils. Journal of Geotechnical and Geoenvironmental Engineering, 135 (10), 1379–1389.
   Web of Science ®Google Scholar
• Tseng, K. and Lytton, R.L., 1989. Prediction of permanent deformation in flexible pavement materials. Implication of Aggregates in the Design, Construction, and Performance of Flexible Pavements, ASTM STP, 1016, 154–172.
   Google Scholar
• Wang, F. and Lytton, R.L., 1975. System identification method for backcalculating pavement layer properties. Transportation Research Record, 1384, 1–7.
   Google Scholar
• Yau, A. and Von Quintus, H.L., 2002. Study of LTPP laboratory resilient modulus test data and response characteristics. Report No.: FHWA-RD-02-051, Federal Highway Administration, Washington, DC.
   Google Scholar
• Zhou, F. and Scullion, T., 2004. Guidelines for developing input parameters of enhanced VESYS5 program. College Station, TX. Report No.: FHWA/TX-05/9-1502-01-P5 Texas Transportation Institute, Texas A&M University.
   Google Scholar