Laboratory investigation of moisture susceptibility of warm-mix asphalt mixtures containing steel slag aggregates

References

• Ahmedzade, P. and Sengoz, B., 2009. Evaluation of steel slag coarse aggregate in hot mix asphalt concrete. Journal of Hazardous Materials, 165 (1–3), 300–305.
   PubMed Web of Science ®Google Scholar
• Airey, G., et al., 2005. Combined laboratory ageing/moisture sensitivity assessment of high modulus base asphalt mixtures. Journal of the Association of Asphalt Paving Technologists, 74, 307–346.
   Google Scholar
• Ameri, M., Hesami, S., and Goli, H., 2013. Laboratory evaluation of warm mix asphalt containing Electric Arc Furnace (EAF) steel slag. Construction and Building Materials, 49, 611–617.
   Web of Science ®Google Scholar
• Banerjee, A., Smit, A., and Prozzi, J.A., 2012. The effect of long-term aging on the rheology of warm mix asphalt binders. Fuel, 97, 603–611.
   Web of Science ®Google Scholar
• Bhasin, A. and Little, D.N., 2007. Characterization of aggregate surface energy using the universal sorption device. Journal of Materials in Civil Engineering, 19 (8), 634–641.
   Web of Science ®Google Scholar
• Capitão, S., Picado-Santos, L., and Martinho, F., 2012. Pavement engineering materials: review on the use of warm-mix asphalt. Construction and Building Materials, 36, 1016–1024.
   Web of Science ®Google Scholar
• Caro, S., et al., 2008a. Moisture susceptibility of asphalt mixtures. Part I: mechanisms. International Journal of Pavement Engineering, 9 (2), 81–98.
   Google Scholar
• Caro, S., et al., 2008b. Moisture susceptibility of asphalt mixtures. Part II: characterization and modeling. International Journal of Pavement Engineering, 9 (2), 99–114.
   Google Scholar
• Chiu, C., Hsu, T., and Yang, W., 2008. Life cycle assessment on using materials for rehabilitating asphalt pavements. Resources, Conservation and Recycling, 52, 545–556.
   Web of Science ®Google Scholar
• Copeland, A.R., 2007. Influence of moisture on bond strength of asphalt aggregate system. Dissertation (PhD). Vanderbilt University, Nashville, TN.
   Google Scholar
• Hamed, F.K.M., 2010. Evaluation of fatigue resistance for modified asphalt concrete mixtures based on dissipated energy concept. Thesis (MSc). Technische Universität Darmstadt.
   Google Scholar
• Hefer, A. and Little, D., 2005. Adhesion in bitumen-aggregate system and quantification of the effects of the water on the adhesive bond, Report No. ICAR/505‐1, Texas Transportation Institute, The Texas A&M University.
   Google Scholar
• Huang, Y.H., 1993. Pavement analysis and design. Englewood Cliffs, NJ: Prentice Hall.
   Google Scholar
• Jamieson, I.L., Moulthrop, J.S., and Jones, D.R., 1995. SHRP results on binder-aggregate adhesion and resistance to stripping. In: Asphalt Yearbook. London: Institute of Asphalt Technology, 17–21.
   Google Scholar
• Kandhal, P.S. and Hoffman, G.L., 1982. The use of steel slag as bituminous concrete fine aggregate. Final Report, Research Project No. 79–26, Pennsylvania Department of Transportation, in cooperation with US Department of Transportation, Federal Highway Administration, Washington, DC.
   Google Scholar
• Kanitpong, K. and Bahia, H.U., 2003. Role of adhesion and thin film tackiness of asphalt binders in moisture damage of HMA. Journal of the Association Asphalt Paving Technologists, 72, 502–528.
   Google Scholar
• Kassem, E., et al., 2006. Measurements of moisture suction and diffusion coefficient in hot-mix asphalt and their relationships to moisture damage. Transport Research Record, 1970, 45–54.
   Google Scholar
• Kheradmand, B., et al., 2013. An overview of the emerging warm mix asphalt technology. International Journal of Pavement Engineering, published online: 20 Sep 2013. https://doi.org/doi:10.1080/10298436.2013.839791.
   Web of Science ®Google Scholar
• Kim, Y.R., Zhang, J., and Ban, H., 2012. Moisture damage characterization of warm-mix asphalt mixtures based on laboratory-field evaluation. Construction and Building Materials, 31, 204–211.
   Web of Science ®Google Scholar
• Kringos, N. and Scarpas, A., 2008. Physical and mechanical moisture susceptibility of asphalt mixtures. International Journal of Solids Structure, 45, 2671–2685.
   Web of Science ®Google Scholar
• Lottman, R.P., 1978. Predicting moisture-induced damage to asphaltic concrete. NCHRP Report No. 192, Transportation Research Board, National Research Council, Washington, DC.
   Google Scholar
• Mallick, R.B. and Bergendahl, J., 2013. A laboratory study on CO2 emission from asphalt binder and its reduction with the use of warm mix asphalt. International Journal of Pavement Engineering, 2 (4), 275–283.
   Google Scholar
• McCann, M. and Sebaaly, P.E., 2001. Quantitative evaluation of stripping potential in hot-mix asphalt using ultrasonic energy for moisture-accelerated conditioning. Transportation Research Record, 1767, 48–59.
   Google Scholar
• Morgan, P. and Mulder, A., 1995. The shell bitumen industrial handbook. London: Thomas Telford Publishing.
   Google Scholar
• Petersen, J.C., 1986. Quantitative functional group analysis of asphalts using differential infrared spectrometry and selective chemical reactions. Transport Research Record, 1096, 1–11.
   Google Scholar
• Plancher, H., Dorrence, S.M., and Petersen, J.C., 1977. Identification of chemical types in asphalts strongly adsorbed at the asphalt-aggregate interface and their relative displacement by water in Asphalt Paving Technology. Proceedings of the Association of Asphalt Paving Technologists, 46, 151–175.
   Google Scholar
• Pocius, A.V., 1997. Adhesion and adhesives technology. Cincinnati, OH: Hanser/Gardner Publications, Inc.
   Google Scholar
• Prowell, B.D., Hurley, G.C., and Crews, E., 2007. Field performance of warm-mix asphalt at national center for asphalt technology test track. Transport Research Record, 1998, 96–102.
   Web of Science ®Google Scholar
• Rubio, M.C., et al., 2012. Warm mix asphalt: an overview. Journal of Cleaner Production, 24, 76–84.
   Web of Science ®Google Scholar
• Rubio, M.D.C., et al., 2013. Comparative analysis of emissions from the manufacture and use of hot and half-warm mix asphalt. Journal of Cleaner Production, 41, 1–6.
   Web of Science ®Google Scholar
• Sorlini, S., Sanzeni, A., and Rondi, L., 2012. Reuse of steel slag in bituminous paving mixtures. Journal of Hazardous Materials, 209–210, 84–91.
   PubMed Web of Science ®Google Scholar
• Wang, G., Wang, Y., and Gao, Z., 2010. Use of steel slag as a granular material: volume expansion prediction and usability criteria. Journal of Hazardous Materials, 184 (1–3), 555–560.
   PubMed Web of Science ®Google Scholar
• Xiao, F., Jordan, J., and Amirkhanian, S., 2009. Laboratory investigation of moisture damage in warm mix asphalt containing moist aggregate. Transportation Research Record: Journal of the Transportation Research Board (2126), 115–124.
   Web of Science ®Google Scholar
• Xiao, F., et al., 2010a. Influence of anti-stripping additive on moisture susceptibility of warm mix asphalt mixture. Journal of Materials in Civil Engineering (ASCE), 22 (10), 1047–1055.
   Web of Science ®Google Scholar
• Xiao, F., Amirkhanian, S., and Putman, B., 2010b. Evaluation of rutting resistance in warm asphalt mixture containing moist aggregate. Transportation Research Record: Journal of the Transportation Research Board, 2180, 75–84.
   Web of Science ®Google Scholar
• Xiao, F., et al., 2012. Laboratory investigation of moisture susceptibility of long-term saturated warm mix asphalt mixtures. International Journal of Pavement Engineering, 13 (5), 401–414.
   Web of Science ®Google Scholar
• Yildirim, I.Z. and Prezzi, M., 2009. Use of steel slag in subgrade applications. West Lafayette: Joint Transportation Research Program, Indiana Department of Transportation and Purdue University. doi:10.5703/1288284314275.
   Google Scholar