Evaluation of Rediset for use in warm-mix asphalt: a review of the literatures

References

• Abdullah, M., et al., 2012. Physical properties and storage stability of asphalt binder modified with nanoclay and warm asphalt additives. World Journal of Engineering, 9 (2), 155–160.
   Google Scholar
• Abdullah, M.E., et al., 2011. Storage stability and physical properties of asphalt modified with nanoclay and warm asphalt additives  [online]. Available from: http://eprints.uthm.edu.my/1995/1/Abdullah%2C_Mohd_Ezree_FKEE_(ICCE19).pdf [Accessed 12 February 2014].
   Google Scholar
• Ahmed, E.I., et al., 2012. Effect of warm mix additives and dispersants on asphalt rheological, aging and failure properties. Construction and Building Materials, 37, 493–498.
   Web of Science ®Google Scholar
• Akisetty, C.K., Lee, S.J., and Amirkhanian, S.N., 2009. High temperature properties of rubberized binders containing warm asphalt additives. Construction and Building Materials, 23 (1), 565–573.
   Web of Science ®Google Scholar
• AkzoNobel, 2011. Rediset WMX. Available from: www.akzonobel.com/surface.
   Google Scholar
• Al-Qadi, I.L., et al., 2012a. Short-term performance of modified stone matrix asphalt (SMA) produced with warm mix additives. [online]. Available from: https://www.ideals.illinois.edu/bitstream/handle/2142/45813/ICT-12-001.pdf?sequence = 2 [Accessed 12 February 2014].
   Google Scholar
• Al-Qadi, I.L., et al., 2012b. Short-term performance of plant-mixed warm stone mastic asphalt. Transportation Research Record: Journal of the Transportation Research Board, 2306 (1), 86–94.
   Web of Science ®Google Scholar
• Alavi, M.Z., et al., 2012. Evaluating adhesion properties and moisture damage susceptibility of warm-mix asphalts. Transportation Research Record: Journal of the Transportation Research Board, 2295 (1), 44–53.
   Web of Science ®Google Scholar
• Anderson, D.A., et al., 2001. Evaluation of fatigue criteria for asphalt binders. Transportation Research Record: Journal of the Transportation Research Board, 1766 (1), 48–56.
   Google Scholar
• Arega, Z. and Bhasin, A., 2012. Interim report: Binder rheology and performance in warm mix asphalt. FHWA/TX-12/0-6591-2. USA: Center for Transportation Research, The University of Texas at Austin.
   Google Scholar
• Arega, Z., Bhasin, A., Motamed, A., and Turner, F., 2011. Influence of warm-mix additives and reduced aging on the rheology of asphalt binders with different natural wax contents. Journal of Materials in Civil Engineering, 23 (10), 1453–1459.
   Web of Science ®Google Scholar
• Arega, Z.A., Bhasin, A., and Kesel, T.D., 2013. Influence of extended aging on the properties of asphalt composites produced using hot and warm mix methods. Construction and Building Materials, 44, 168–174.
   Web of Science ®Google Scholar
• Banerjee, A., De Fortier Smit, A., and Prozzi, J.A., 2012. The effect of long-term aging on the rheology of warm mix asphalt binders. Fuel, 97, 603–611.
   Web of Science ®Google Scholar
• Bennert, T., 2012a. Early age rutting potential of warm mix asphalt (WMA). C-10-08. USA: Center for Advanced Infrastructure and Transportation (CAIT), Rutgers University.
   Google Scholar
• Bennert, T., 2012b. Evaluation of warm asphalt technology, FHWA-NJ-2011-005. USA: Center for Advanced Infrastructure and Transportation (CAIT), The State University of New Jersey.
   Google Scholar
• Bennert, T., Maher, A., and Sauber, R., 2011. Influence of production temperature and aggregate moisture content on the initial performance of warm-mix asphalt. Transportation Research Record: Journal of the Transportation Research Board, 2208 (1), 97–107.
   Web of Science ®Google Scholar
• Bennert, T., Reinke, G., Mogawer, W., and Mooney, K., 2010. Assessment of workability and compactability of warm-mix asphalt. Transportation Research Record: Journal of the Transportation Research Board, 2180 (1), 36–47.
   Web of Science ®Google Scholar
• Bhargav, N.G., 2013. Warm mix design of bituminous concrete using redist wmx. International global reserch analysis, 2 (6), 70–72.
   Google Scholar
• Biligiri, K.P., Kaloush, K., and Uzan, J., 2010. Evaluation of asphalt mixtures’ viscoelastic properties using phase angle relationships. International Journal of Pavement Engineering, 11 (2), 143–152.
   Web of Science ®Google Scholar
• Bonaquist, R.F., 2011. Mix design practices for warm mix asphalt. USA: Transportation Research Board.
   Google Scholar
• Capitão, S.D., Picado-Santos, L.G., and Martinho, F., 2012. Pavement engineering materials: Review on the use of warm-mix asphalt. Construction and Building Materials, 36, 1016–1024.
   Web of Science ®Google Scholar
• Castaño, N., Ferré, P., Fossas, F. and Puñet, A. (2004). A real heat stable bitumen antistripping agent. The 8th conference on asphalt pavements for Southern Africa, Sun City, South Africa.
   Google Scholar
• Caro, S., et al., 2012. Analysis of moisture damage susceptibility of warm mix asphalt (WMA) mixtures based on dynamic mechanical analyzer (DMA) testing and a fracture mechanics model. Construction and Building Materials, 35, 460–467.
   Web of Science ®Google Scholar
• Chen, J.S. and Huang, L.S., 2000. Developing an aging model to evaluate engineering properties of asphalt paving binders. Materials and structures, 33 (9), 559–565.
   Web of Science ®Google Scholar
• Chowdhury, A. and Button, J.W., 2008. A review of warm mix asphalt. SWUTC/08/473700-00080-1. USA: Texas Transportation Institute, Texas A&M University.
   Google Scholar
• Dai, Q., Wang, Z., and Mohd Hasan, M.R., 2013. Investigation of induction healing effects on electrically conductive asphalt mastic and asphalt concrete beams through fracture-healing tests. Construction and Building Materials, 49, 729–737.
   Web of Science ®Google Scholar
• Das, P.K., Tasdemir, Y., and Birgisson, B., 2012. Low temperature cracking performance of WMA with the use of the superpave indirect tensile test. Construction and Building Materials, 30, 643–649.
   Web of Science ®Google Scholar
• De Visscher, J., et al., 2010. Asphalt production at reduced temperatures using zeolites and the impact on asphalt performance. Road materials and pavement design, 11 (1), 65–81.
   Web of Science ®Google Scholar
• DelRio-Prat, M., et al., 2011. Effects of aggregate shape and size and surfactants on the resilient modulus of bituminous mixes. Canadian Journal of Civil Engineering, 38 (8), 893–899.
   Web of Science ®Google Scholar
• Dessouky, S., et al., 2012. Laboratory evaluation of the workability and compactability of asphaltic materials prior to road construction. Journal of Materials in Civil Engineering, 25 (6), 810–818.
   Web of Science ®Google Scholar
• Doyle, J.D., Mejías-Santiago, M., and Rushing, J.F., 2013. Binder and mixture testing to assess rutting performance of warm mix asphalt (WMA). The second conference on green street highway and development, Austin, Texas, USA.
   Google Scholar
• Elseifi, M.A., et al., 2011. Quantification of damage in the dynamic complex modulus and flow number tests using X-ray computed tomography. Journal of Materials in Civil Engineering, 23 (12), 1687–1696.
   Web of Science ®Google Scholar
• Estakhri, C., Button, J., and Alvarez, A.E., 2010. Field and laboratory investigation of warm mix asphalt in texas. FHWA/TX-10/0-5597-2. USA: Texas Transportation Institute, The Texas A&M University.
   Google Scholar
• Faghih-Imani, A. and Amador-Jimenez, L., 2013. Toward sustainable pavement management. Transportation Research Record: Journal of the Transportation Research Board, 2366 (1), 13–21. Available from: http://dx.doi.org/10.3141/2366-02.
   Web of Science ®Google Scholar
• Fang, C., Yu, R., Liu, S., and Li, Y., 2013. Nanomaterials applied in asphalt modification: A review. Journal of Materials Science and Technology, 29 (7), 589–594.
   Web of Science ®Google Scholar
• Farshidi, F., et al., 2011. Direct measurements of volatile and semivolatile organic compounds from hot-and warm-mix asphalt. Transportation Research Record: Journal of the Transportation Research Board, 2207 (1), 1–10.
   Web of Science ®Google Scholar
• Glover, C.J., et al., 2005. Development of a new method for assessing asphalt binder durability with field validation. FHWA/TX-05/1872-2. USA: Texas Transportation Institute, The Texas A&M University.
   Google Scholar
• Gong, W., et al., 2012. Investigation of moisture susceptibility of warm-mix asphalt mixes through laboratory mechanical testing. Transportation Research Record: Journal of the Transportation Research Board, 2295 (1), 27–34.
   Web of Science ®Google Scholar
• Hainin, M.R., et al., 2013. Rheological properties of asphalt binder modified with chemical warm asphalt additive. Advanced Materials Research, 671, 1692–1699.
   Google Scholar
• Hamzah, M.O., Jamshidi, A., and Shahadan, Z., 2010. Evaluation of the potential of sasobit® to reduce required heat energy and CO2 emission in the asphalt industry. Journal of Cleaner Production, 18 (18), 1865–1859.
   Web of Science ®Google Scholar
• Hamzah, M.O. and Golchin, B., 2013. A laboratory investigation on the rheological properties of asphalt binder containing rediset. The 10th International Conference of Eastern Asia Society for Transportation Studies Taipei, Taiwan.
   Google Scholar
• Hamzah, M.O., Golchin, B., and Tye, C.T., 2013a. Determination of the optimum binder content of warm mix asphalt incorporating rediset using response surface method. Construction and Building Materials, 47, 1328–1336.
   Web of Science ®Google Scholar
• Hamzah, M.O., et al., 2013b. Laboratory simulation of the clogging behaviour of single-layer and two-layer porous asphalt. Road materials and pavement design, 14 (1), 107–125.
   Web of Science ®Google Scholar
• Hamzah, M.O., et al., 2014. Quantification of moisture sensitivity of warm mix asphalt using image analysis technique. Journal of Cleaner Production. Available online 4, 2014.
   Google Scholar
• Hanz, A. and Bahia, H., 2011. Effects of warm mix additives on mixture workability and the performance implications of reduced binder aging. The 7th International Conference on Road and Airfield Pavement Technology. Bangkok, Thailand.
   Google Scholar
• Hanz, A., Mahmoud, E., and Bahia, H., 2010a. Impacts of WMA production temperatures onbinder aging and mixture flow number. 86th association of asphalt paving technolo-gists annual meeting, Florida, USA.
   Google Scholar
• Hanz, A.J., et al., 2010b. Measuring effects of warm-mix additives. Transportation Research Record: Journal of the Transportation Research Board, 2180 (1), 85–92.
   Web of Science ®Google Scholar
• Hassan, M., 2010. Evaluation of the environmental and economic impacts of warm-mix asphalt using life-cycle assessment. International Journal of Construction Education and Research, 6 (3), 238–250.
   Google Scholar
• Isebäck, A., 2012. Eco-premium solutions with focus on downstream environmental consequences. Thesis (MSc), Chalmers University of Technology.
   Google Scholar
• Iskender, E., Aksoy, A., and Ozen, H., 2012. Indirect performance comparison for styrene-butadiene-styrene polymer and fatty amine anti-strip modified asphalt mixtures. Construction and Building Materials, 30, 117–124.
   Web of Science ®Google Scholar
• Jamshidi, A., Hamzah, M.O., and Shahadan, Z., 2012. Selection of reclaimed asphalt pavement sources and contents for asphalt mix production based on asphalt binder rheological properties, fuel requirements and greenhouse gas emissions. Journal of Cleaner Production, 23 (1), 20–27.
   Web of Science ®Google Scholar
• Jamshidi, A., Hamzah, M.O., and You, Z., 2013. Performance of warm mix asphalt containing sasobit®: State-of-the-art. Construction and Building Materials, 38, 530–553.
   Web of Science ®Google Scholar
• Jenkins, K., et al., 2011. Flexural stiffness and fatigue properties of warm mix asphalt. Proceedings of the 10th conference on asphalt pavement for Southern Africa, KwaZulu-Natal, South Africa, KwaZulu-Natal, South Africa.
   Google Scholar
• Jones, D., Tsai, B.W., and Signore, J., 2010. Warm-mix asphalt study: Laboratory test results for akzonobel RedisetTM WMX. UCPRC-CR-2010-01. USA: University of California Pavement Research Center.
   Google Scholar
• Jones, D., et al., 2012. Research findings on the use of rubberized warm-mix asphalt in california. 2nd International Symposium on Asphalt Pavements and Environment. Fortaleza, Brazil.
   Google Scholar
• Jones, D., et al., 2011a. Key results from a comprehensive accelerated loading, laboratory and field testing study on warm-mix asphalt in californiaed. Proceedings 2nd international conference on warm-mix asphalt, St. Louis, USA.
   Google Scholar
• Jones, D., et al., 2011b. Warm-mix asphalt study: Test track construction and first-level analysis of phase 3b hvs and laboratory testing. (Rubberized asphalt, mix design#2). UCPRC-RR-2011-03. University of California Pavement Research Center.
   Google Scholar
• Kachanov, L., 1986. Introduction to continuum damage mechanics. USA: Springer.
   Google Scholar
• Kheradmand, B., et al., 2014. An overview of the emerging warm mix asphalt technology. International Journal of Pavement Engineering, 15 (1), 79–94.
   Web of Science ®Google Scholar
• Khodaii, A., Kazemi Tehrani, H., and Haghshenas, H., 2012. Hydrated lime effect on moisture susceptibility of warm mix asphalt. Construction and Building Materials, 36, 165–170.
   Web of Science ®Google Scholar
• Kilas, M., Vaitkus, A., and Paliukaitė, M., 2010. Warm mix asphalts research, analysis and evaluation. 10th international conference Modern building materials, structures, and techniques.
   Google Scholar
• Kim, H., Lee, S.J., and Amirkhanian, S.N., 2011a. Impact of warm mix additives on rheological properties of polymer modified asphalt binders. Canadian Journal of Civil Engineering, 38 (12), 1414–1426.
   Web of Science ®Google Scholar
• Kim, Y., et al., 2011b. Laboratory and field experiences of low energy and low carbon-dioxide asphalt pavement in korea. GeoHunan international conference II: Emerging technologies for design, construction, rehabilitation, and inspection of transportation infrastructure, Hunan, China.
   Google Scholar
• Kök, B.V. and Çolak, H., 2011. Laboratory comparison of the crumb-rubber and sbs modified bitumen and hot mix asphalt. Construction and Building Materials, 25 (8), 3204–3212.
   Web of Science ®Google Scholar
• Kristjánsdóttir, Ó., et al., 2007. Assessing potential for warm-mix asphalt technology adoption. Transportation Research Record: Journal of the Transportation Research Board, 2040 (1), 91–99.
   Web of Science ®Google Scholar
• Lee, H.D. and Kim, Y.T., 2009. Performance measures of warm asphalt mixtures for safe and reliable freight transportation, 25-1121-0001-124.
   Google Scholar
• Lee, S.J., et al., 2009. Characterization of warm mix asphalt binders containing artificially long-term aged binders. Construction and Building Materials, 23 (6), 2371–2379.
   Web of Science ®Google Scholar
• Leng, Z., Gamez, A., and Al-Qadi, I.L., 2013. Mechanical property characterization of warm-mix asphalt prepared with chemical additives. Journal of Materials in Civil Engineering, 26 (2), 304–311.
   Web of Science ®Google Scholar
• Lesueur, D., Petit, J., and Ritter, H.J., 2012. The mechanisms of hydrated lime modification of asphalt mixtures: A state-of-the-art review. Road materials and pavement design, 14 (1), 1–16. Available from: https://doi.org/http://dx.doi.org/10.1080/14680629.2012.743669 [Accessed 2013/10/11].
   Web of Science ®Google Scholar
• Li, J., Zofka, A., and Yut, I., 2012. Evaluation of dynamic modulus of typical asphalt mixtures in northeast us region. Road materials and pavement design, 13 (2), 249–265.
   Web of Science ®Google Scholar
• Mallick, R.B., Bradley, J.E., and Bradbury, R.L., 2007. Evaluation of heated reclaimed asphalt pavement material and wax-modified asphalt for use in recycled hot-mix asphalt. Transportation Research Record: Journal of the Transportation Research Board, 1998 (1), 112–122.
   Web of Science ®Google Scholar
• Martono, W., Bahia, H.U., and D'angelo, J., 2007. Effect of testing geometry on measuring fatigue of asphalt binders and mastics. Journal of Materials in Civil Engineering, 19 (9), 746–752.
   Web of Science ®Google Scholar
• McBroom, D.G., 2009. Montana department of transportation research report warm mix asphalt  [on line]. Available from: ftp://parentpower.mt.gov/contract/bid-packages/_PAST_LETTINGS/2010_LETTINGS/02_FEB_11_LETTING/105_WEST_OF_TWO_DOT-WEST/_UPDATED-020510_WMA-FINALV3.PDF. [Accessed 12 February 2014].
   Google Scholar
• Medeiros Jr., M.S., et al., 2012. Evaluation of moisture and low-temperature cracking susceptibility of warm-mixture asphalt. International Journal of Pavement Engineering, 13 (5), 395–400.
   Web of Science ®Google Scholar
• Mo, L., Li, X., Fang, X., Huurman, M., and Wu, S., 2012. Laboratory investigation of compaction characteristics and performance of warm mix asphalt containing chemical additives. Construction and Building Materials, 37, 239–247.
   Web of Science ®Google Scholar
• Mogawer, W.S., Austerman, A.J., and Bahia, H.U., 2011. Evaluating the effect of warm-mix asphalt technologies on moisture characteristics of asphalt binders and mixtures. Transportation Research Record: Journal of the Transportation Research Board, 2209 (1), 52–60.
   Web of Science ®Google Scholar
• Mohd Hasan, M.R., Goh, S.W., and You, Z., 2013. Comparative study on the properties of wma mixture using foamed admixture and free water system. Construction and Building Materials, 48, 45–50.
   Web of Science ®Google Scholar
• Motta, R., et al., 2012. Comparison of the n-alkanes and polycyclic aromatic hydrocarbons concentrations in the atmosphere during the preparation of warm and hot mixtures asphalt for pavements. Journal of the Brazilian Chemical Society, 23 (8), 1501–1505.
   Web of Science ®Google Scholar
• Prowell, B.D., Hurley, G.C., and Frank, B., 2007. Warm-mix asphalt: Best practices. USA: National Asphalt Pavement Association.
   Google Scholar
• Rebitzer, G., et al., 2004. Life cycle assessment: Part 1: Framework, goal and scope definition, inventory analysis, and applications. Environment International, 30 (5), 701–720.
   PubMed Web of Science ®Google Scholar
• Rjeb, M., et al., 2005. TG and DSC studies of natural and artificial aging of polypropylene. Physica A: Statistical Mechanics and its Applications, 358 (1), 212–217.
   Web of Science ®Google Scholar
• Rosen, M.J. and Kunjappu, J.T., 2012. Surfactants and interfacial phenomena. John Wiley and Sons.
   Google Scholar
• Rubio, M.C., et al., 2012. Warm mix asphalt: An overview. Journal of Cleaner Production, 24, 76–84.
   Web of Science ®Google Scholar
• Rushing, J.F., Mejías-Santiago, M., and Doyle, J.D., 2013. Assessment of warm mix asphalt (WMA) for heavy traffic airfields. Transportation Research Record: Journal of the Transportation Research Board, 2371 (1), 41–48.
   Web of Science ®Google Scholar
• Sampath, A., 2010. Comprehensive evaluation of four warm asphalt mixture regarding viscosity, tensile strength, moisture sensitivity, dynamic modulus and flow number. Thesis (MSc), University of Iowa.
   Google Scholar
• Sanchez-Alonso, E., et al., 2013. Effect of warm additives on rutting and fatigue behaviour of asphalt mixtures. Construction and Building Materials, 47, 240–244.
   Web of Science ®Google Scholar
• Sanchez-Alonso, E., et al., 2011. Evaluation of compactability and mechanical properties of bituminous mixes with warm additives. Construction and Building Materials, 25 (5), 2304–2311.
   Web of Science ®Google Scholar
• Sengoz, B. and Isikyakar, G., 2008. Analysis of styrene-butadiene-styrene polymer modified bitumen using fluorescent microscopy and conventional test methods. Journal of Hazardous Materials, 150 (2), 424–432.
   PubMed Web of Science ®Google Scholar
• Sengoz, B. and Oylumluoglu, J., 2013. Utilization of recycled asphalt concrete with different warm mix asphalt additives prepared with different penetration grades bitumen. Construction and Building Materials, 45, 173–183.
   Web of Science ®Google Scholar
• Sengoz, B., Topal, A., and Gorkem, C., 2013. Evaluation of natural zeolite as warm mix asphalt additive and its comparison with other warm mix additives. Construction and Building Materials, 43, 242–252.
   Web of Science ®Google Scholar
• Şengöz, B., Topal, A., and Gorkem, C., 2013. Evaluation of moisture characteristics of warm mix asphalt involving natural zeolite. Road materials and pavement design, 14 (4), 933–945.
   Web of Science ®Google Scholar
• Shang, L., Wang, S., and Zhang, Y., 2011. Pyrolyzed wax from recycled cross-linked polyethylene as warm mix asphalt (WMA) additive for sbs modified asphalt. Construction and Building Materials, 25 (2), 886–891.
   Web of Science ®Google Scholar
• Shen, S., Chiu, H., and Huang, H., 2010. Characterization of fatigue and healing in asphalt binders. Journal of Materials in Civil Engineering, 22 (9), 846–852.
   Web of Science ®Google Scholar
• Shi, P.C., et al., 2013. Selecting warm mix asphalt (WMA) additives by the properties of WMA binders. Advanced Materials Research, 753, 585–590.
   Google Scholar
• Shivaprasad, P.V., Xiao, F., and Amirkhanian, S.N., 2012. Evaluation of moisture sensitivity of stone matrix asphalt mixtures using polymerised warm mix asphalt technologies. International Journal of Pavement Engineering, 13 (2), 152–165.
   Web of Science ®Google Scholar
• Shu, X., et al., 2012. Laboratory evaluation of moisture susceptibility of foamed warm mix asphalt containing high percentages of rap. Construction and Building Materials, 35, 125–130.
   Web of Science ®Google Scholar
• Silva, H.M.R.D., et al., 2010. Optimization of warm mix asphalts using different blends of binders and synthetic paraffin wax contents. Construction and Building Materials, 24 (9), 1621–1631.
   Web of Science ®Google Scholar
• Smiljanić, M., Pap, I., and Tatić, U., 2009. Practical experiences of using the polyfunctional additive ‘Rediset WMX’ for asphalt mixtures in Serbia. Put i saobraćaj, 56 (4), 23–31.
   Google Scholar
• Smiljanic, M., et al., 2011. Potentials of using the polyfunctional additive “Rediset wmx” for asphalt mixtures, 5th international conference bituminous mixtures and pavements, Greece.
   Google Scholar
• Syroezhko, A., et al., 2011. Influence of natural additives and those synthesized by the fischer-tropsch method on the properties of petroleum bitumen and quality of floated asphalt. Coke and Chemistry, 54 (1), 26–31.
   Google Scholar
• Tabatabaee, N. and Tabatabaee, H.A., 2010. Multiple stress creep and recovery and time sweep fatigue tests. Transportation Research Record: Journal of the Transportation Research Board, 2180 (1), 67–74.
   Web of Science ®Google Scholar
• Tao, M. and Mallick, R.B., 2009. Effects of warm-mix asphalt additives on workability and mechanical properties of reclaimed asphalt pavement material. Transportation Research Record: Journal of the Transportation Research Board, 2126 (1), 151–160.
   Web of Science ®Google Scholar
• Tran, N.H. and Hall, K.D., 2006. Evaluation of testing protocols for dynamic modulus of hot-mix asphalt. Transportation Research Record: Journal of the Transportation Research Board, 1970 (1), 126–132.
   Google Scholar
• Trujillo, P., 2011. Long term aging study of WMA binder, .Thesis (MSc),The University of Texas at Austin.
   Google Scholar
• Tsai, J. and Lai, J., 2010. Evaluating constructability and properties of warm mix asphalt. Georgia Institute of Technology (Atlanta), Final report.
   Google Scholar
• Uddin, W. and Jaafar, Z.F.M., 2013. Achieving sustainability without compromising long-term pavement performance for road infrastructure assets. International Journal of Pavements Conference, São Paulo, Brazil.
   Google Scholar
• Vallabhu, B.V., 2012. Fundamental characterization of asphalt mixtures: Warm mix asphalt technologies in flexible pavement systems. Thesis (MSc), Faculty of the Louisiana State University and Agricultural and Medical College.
   Google Scholar
• Van De Ven, M., et al., 2012. Dynamic viscosity analysis of base bitumen with the addition of rediset. Advanced Materials Research, 476, 1621–1625.
   Google Scholar
• Velasquez, R., et al., 2009. Using recycled taconite as alternative aggregate in asphalt pavements. Construction and Building Materials, 23 (9), 3070–3078.
   Web of Science ®Google Scholar
• Wang, C., et al., 2013. Determination of the production temperature of warm mix asphalt by workability test. Construction and Building Materials, 48, 1165–1170.
   Web of Science ®Google Scholar
• Wen, H. and Bahia, H., 2009. Characterizing fatigue of asphalt binders with viscoelastic continuum damage mechanics. Transportation Research Record: Journal of the Transportation Research Board, 2126 (1), 55–62.
   Web of Science ®Google Scholar
• Willis, J.R., et al., 2011. Combining warm mix asphalt technologies with mixtures containing reclaimed asphalt pavemented. 2nd International Warm-mix Conference., St. Louis, Missouri, 11–13.
   Google Scholar
• Witczak, M.W., 2007. Specification criteria for simple performance tests for rutting. Washington, DC: Transportation Research Board, Vol. 1, 1–44.
   Google Scholar
• Xiao, F., Wenbin Zhao, P., and Amirkhanian, S.N., 2009. Fatigue behavior of rubberized asphalt concrete mixtures containing warm asphalt additives. Construction and Building Materials, 23 (10), 3144–3151.
   Web of Science ®Google Scholar
• Xiao, F., Amirkhanian, S.N., and Putman, B.J., 2010. Evaluation of rutting resistance in warm-mix asphalts containing moist aggregate. Transportation Research Record: Journal of the Transportation Research Board, 2180 (1), 75–84.
   Web of Science ®Google Scholar
• Xiao, F., Amirkhanian, S.N., and Zhang, R., 2011. Rheological investigation of non-foaming WMA additives at mid-temperatureed. In: Emerging Technologies for Material, Design, Rehabilitation, and Inspection of Roadway Pavements. Geotechnical Special Publication, No. 218, ASCE.
   Google Scholar
• Xiao, F., Amirkhanian, S.N., and Zhang, R., 2012a. Influence of short-term aging on rheological characteristics of non-foaming WMA binders. Journal of Performance of Constructed Facilities, 26 (2), 145–152.
   Web of Science ®Google Scholar
• Xiao, F., Punith, V., and Amirkhanian, S.N., 2012b. Effects of non-foaming WMA additives on asphalt binders at high performance temperatures. Fuel, 94, 144–155.
   Web of Science ®Google Scholar
• Xiao, F., Punith, V.S., Amirkhanian, S.N., and Thodesen, C., 2012c. Improved resistance of long term aged warm mix asphalt to moisture damage containing moist aggregates. Journal of Materials in Civil Engineering.
   Web of Science ®Google Scholar
• Xiao, F., et al., 2013a. A long-term ultraviolet aging procedure on foamed WMA mixtures. Materials and structures, 46 (12), 1987–2001.
   Web of Science ®Google Scholar
• Xiao, F., et al., 2013b. Rheological and chemical characteristics of WMA binders at intermediate and low performance temperatures. Canadian Journal of Civil Engineering, 40 (9), 861–868.
   Web of Science ®Google Scholar
• Ying, H., 2010. Using x-ray computed tomography to quantify damage of hot-mix asphalt in the dynamic complex modulus and flow number test. Thesis (MSc), Faculty of the Louisiana State University and Agricultural and Medical College.
   Google Scholar
• Yoo, M.-Y., et al., 2011. Low-temperature fracture characteristics of selected warm-mix asphalt concretes. Transportation Research Record: Journal of the Transportation Research Board, 2208 (1), 40–47.
   Web of Science ®Google Scholar
• Zaumanis, M. and Haritonovs, V., 2010. Research on properties of warm mix asphalt. Scientific Proceedings of Riga Technical University, Series 2: Architecture and Construction Science, 11 (77), 2010.
   Google Scholar
• Zhao, W., Xiao, F., Amirkhanian, S.N., and Putman, B.J., 2012. Characterization of rutting performance of warm additive modified asphalt mixtures. Construction and Building Materials, 31, 265–272.
   Web of Science ®Google Scholar
• Zhu, H., et al., 2013. Effects of warm mix asphalt (WMA) additives on the properties of WMA mixtures. Applied Mechanics and Materials, 275, 2097–2102.
   Google Scholar