Analysis of the influence of binder properties on the mechanical response of bituminous mixtures

References

• AASHTO TP 70, 2009. Standard method of test for multiple stress creep recovery (MSCR) test of asphalt binder using a dynamic shear rheometer (DSR). Washington, DC: American Association of State and Highway Transportation Officials.
   Google Scholar
• Airey, G.D., 2003. Rheological properties of styrene butadiene styrene polymer modified road bitumens. Fuel, 82, 1709–1719.10.1016/S0016-2361(03)00146-7
   Web of Science ®Google Scholar
• Airey, G. and Rahimzadeh, B., 2004. Combined bituminous binder and mixture linear rheological properties. Construction and Building Materials, 18, 535–548.10.1016/j.conbuildmat.2004.04.008
   Web of Science ®Google Scholar
• Baglieri, O., et al., 2012. Influence of physical hardening on the low-temperature properties of bitumen and asphalt mixtures. Procedia – Social and Behavioral Sciences, 53, 504–513.
   Google Scholar
• Behzadfar, E. and Hatzikiriakos, S.G., 2013. Viscoelastic properties and constitutive modelling of bitumen. Fuel, 108, 391–399.10.1016/j.fuel.2012.12.035
   Web of Science ®Google Scholar
• Braham, A.F., Buttlar, W.G., and Marasteanu, M.O., 2007. Effect of binder type, aggregate, and mixture composition on fracture energy of hot-mix asphalt in cold climates. Transportation Research Record, 2001, 102–109.10.3141/2001-12
   Web of Science ®Google Scholar
• Clopotel, C.S., et al., 2012. Relationship between binder and mixture damage resistance at intermediate and low temperatures. Transportation Research Record: Journal of the Transportation Research Board, 2293, 39–47.10.3141/2293-05
   Web of Science ®Google Scholar
• D’Angelo, J., et al., 2007. Revision of the superpave high temperature binder specification: the multiple stress creep and recovery test. Journal of the Association of Asphalt Paving Technologist, 76, 123–162.
   Google Scholar
• D’Angelo, J.A., 2009. The relationship of the MSCR test to rutting. Road Materials and Pavement Design, 10, 61–80.10.1080/14680629.2009.9690236
   Web of Science ®Google Scholar
• D’Angelo, J. and Dongré, R., 2009. Practical Use of Multiple Stress Creep and Recovery Test. Transportation Research Record: Journal of the Transportation Research Board, 2126, 73–82.10.3141/2126-09
   Web of Science ®Google Scholar
• Di Benedetto, H., et al., 2004. Linear viscoelastic behaviour of bituminous materials: from binders to mixes. Road Materials and Pavement Design, 5, 163–202.10.1080/14680629.2004.9689992
   Google Scholar
• EN 12593, 2007. Bitumen and bituminous binders. Determination of the Fraass breaking point. Madrid: AENOR, Asociación Española de Normalización y Certificación.
   Google Scholar
• EN 12697-12, 2009. Bituminous mixtures. Test methods for hot mix asphalt – Part 12: determination of the water sensitivity of bituminous specimens. Madrid: AENOR, Asociación Española de Normalización y Certificación.
   Google Scholar
• EN 12697-22, 2008. Bituminous mixtures. Test methods for hot mix asphalt – Part 22: wheel tracking. Madrid: AENOR, Asociación Española de Normalización y Certificación.
   Google Scholar
• EN 12697-26, 2012. Annex C: bituminous mixtures. Test methods for hot mix asphalt – Part 26: stiffness. Madrid: AENOR, Asociación Española de Normalización y Certificación.
   Google Scholar
• EN 12697-34, 2013. Bituminous mixtures. Test methods for hot mix asphalt – Part 34: Marshall test. Madrid: AENOR, Asociación Española de Normalización y Certificación.
   Google Scholar
• EN 12697-6, 2012. Bituminous mixtures. Test methods for hot mix asphalt – Part 6: determination of bulk density of bituminous specimens. Madrid: AENOR, Asociación Española de Normalización y Certificación.
   Google Scholar
• EN 12697-8, 2003. Bituminous mixtures. Test methods for hot mix asphalt – Part 8: determination of void characteristics of bituminous specimens. Madrid: AENOR, Asociación Española de Normalización y Certificación.
   Google Scholar
• EN 13108-2, 2007. Bituminous mixtures. Material specifications – Part 2: asphalt concrete for very thin layers. Madrid: AENOR, Asociación Española de Normalización y Certificación.
   Google Scholar
• EN 13302, 2010. Bitumen and bituminous binders. Determination of dynamic viscosity of bituminous binder using a rotating spindle apparatus. Madrid: AENOR, Asociación Española de Normalización y Certificación.
   Google Scholar
• EN 1426, 2007. Bitumen and bituminous binders. Determination of needle penetration. Madrid: AENOR, Asociación Española de Normalización y Certificación.
   Google Scholar
• EN 1426, 2007. Bitumen and bituminous binders. Determination of the softening point – Ring and ball method. Madrid: AENOR, Asociación Española de Normalización y Certificación.
   Google Scholar
• EN ISO 2592, 2002. Determination of flash and firepoints. Cleveland open cup method. Madrid: AENOR, Asociación Española de Normalización y Certificación.
   Google Scholar
• Federal Highway Administration, U.S. Department of Transportation, 1990. Moisture Damage in Asphalt Mixtures- A State of Art Report. Report No. FHWA-RD-90-019.
   Google Scholar
• Gogalipur, A., 2011. Modification of multiple stress creep and recovery test procedure and usage in specification. Master Thesis. University of Wisconsin.
   Google Scholar
• Gogula, A., et al., 2003. Effect of PG binder grade and source on performance of superpave mixtures under Hamburg wheel tester. In: Proceedings of the 2003 Mid-Continent Transportation Research Symposium, Iowa, 1–11.
   Google Scholar
• Hafeez, I., et al., 2012. Performance prediction of hot mix asphalt from asphalt binders. Pakistan Journal of Engineering and Applied Sciences, 11, 104–113.
   Google Scholar
• Hafeez, I., et al., 2013. Influence of time and temperature on asphalt rheological properties. Life Science Journal, 10, 894–898.
   Google Scholar
• Hanz, A.J. and Bahia, H.U., 2013. Asphalt binder contribution to mixture workability and application of asphalt lubricity test to estimate compactability temperatures for warm-mix asphalt. Transportation Research Record: Journal of the Transportation Research Board, 2371, 87–95.10.3141/2371-10
   Web of Science ®Google Scholar
• Heffer, A. W., 2004. Adhesion in bitumen-aggregate systems and quantification of the effects of water on the adhesive bond. Thesis (PhD). Texas A&M University.
   Google Scholar
• Kanitpong, K. and Bahia, H.U., 2003. Role of adhesion and thin film tackiness of asphalt binders in moisture damage of HMA. Journal of the Association of Asphalt Paving Technologists, 72, 502–528.
   Google Scholar
• Kanitpong, K. and Bahia, H., 2005. Relating adhesion and cohesion of asphalts to the effect of moisture on laboratory performance of asphalt mixtures. Transportation Research Record, 1901, 33–43.10.3141/1901-05
   Google Scholar
• Kok, B.V. and Kuloglu, N., 2007. The effect of different binders on mechanical properties of hot mix asphalt. International Journal of Science & technology, 2, 41–48.
   Google Scholar
• Moreno, F., et al., 2013. The effect of crumb rubber modifier on the resistance of asphalt mixes to plastic deformation. Materials and Design, 47, 274–280.10.1016/j.matdes.2012.12.022
   Web of Science ®Google Scholar
• Moreno-Navarro, F. and Rubio-Gámez, M.C., 2013. UGR-FACT test for the study of fatigue cracking in bituminous mixes. Construction and Building Materials, 43, 184–190.10.1016/j.conbuildmat.2013.02.024
   Web of Science ®Google Scholar
• Moreno-Navarro, F. and Rubio-Gámez, M.C., 2014. Mean damage parameter for the characterization of fatigue cracking behavior in bituminous mixes. Materials & Design, 54, 748–754.10.1016/j.matdes.2013.09.004
   Web of Science ®Google Scholar
• Olard, F., et al., 2005. Properties of bituminous mixtures at low temperatures and relations with binder characteristics. Materials and Structures, 38, 121–126.10.1007/BF02480584
   Web of Science ®Google Scholar
• Olard, F., Di Benedetto, H., Eckmann, B. and Triquigneaux, J.P., 2003. Linear viscoelastic properties of bituminous binders and mixtures at low and intermediate temperatures. Road Materials and Pavement Design, 4, 77–107.10.1080/14680629.2003.9689941
   Google Scholar
• Páez Dueñas, A., Pérez Jiménez, F., and Miró Recasens, R., 2009. Evaluation of cohesion of crumb rubber modified bitumens by means of UCL method. Road Materials and Pavement Design, 10, 667–676.
   Web of Science ®Google Scholar
• Pérez Jiménez, F., Miró Recasens, R., 1994. New methodology for asphalt binder characterisation: the UCL method. Revista Técnica de la Asociación Española de la Carretera, 73, 27–48.
   Google Scholar
• Pérez-Lepe, A., et al., 2003. Influence of the processing conditions on the rheological behaviour of polymer-modified bitumen. Fuel, 82, 1339–1348.10.1016/S0016-2361(03)00065-6
   Web of Science ®Google Scholar
• Polacco, G., et al., 2012. Structural and rheological characterization of wax modified bitumens. Fuel, 95, 407–416.10.1016/j.fuel.2011.10.006
   Web of Science ®Google Scholar
• Shen. S. and Carpenter, S.H., 2007. Dissipated energy concepts for HMA performance: fatigue and healing. Center of Excellence for Airport Technology, COE Report No. 29, Technical Report of Research, Federal Aviation Administration. Urbana, IL: University of Illinois at Urbana-Champaign.
   Google Scholar
• Shenoy, A., 2001. Refinement of the superpave specification parameter for performance grading of asphalt. Journal of Transportation Engineering, 127, 357–362.10.1061/(ASCE)0733-947X(2001)127:5(357)
   Web of Science ®Google Scholar
• Soenen, H., De la Roche, C., and Redeluis, P., 2004. Predict mix fatigue tests from binder fatigue properties, measured with a DSR. In: Proceedings of the 3rd Eurasphalt and Eurobitumen Congress, Vol. 2. Vienna, 1924–1934.
   Google Scholar
• Soleymani, H.R., Zhai, H., and Bahia, H., 2004. Role of Modified Binders in Rheology and Damage Resistance Behavior of Asphalt Mixtures. Transportation Research Record, 1875, 70–79.10.3141/1875-08
   Google Scholar
• Thom, N., 2008. Principles of pavement engineering. London: Thomas Telford. 470 pp.
   Google Scholar
• Wasage, T.L.J., Stastna, J., and Zanzotto, L., 2011. Rheological analysis of multi-stress creep recovery (MSCR) test. International Journal of Pavement Engineering, 12, 561–568.10.1080/10298436.2011.573557
   Web of Science ®Google Scholar
• Yilmaz, M. and Çeloğlu, M.E., 2013. Effects of SBS and different natural asphalts on the properties of bituminous binders and mixtures. Construction and Building Materials, 44, 533–540.10.1016/j.conbuildmat.2013.03.036
   Web of Science ®Google Scholar
• Zhou, F., et al., 2013. Evaluation of fatigue tests for characterizing asphalt binders. Journal of Materials in Civil Engineering, 25, 610–617.10.1061/(ASCE)MT.1943-5533.0000625
   Web of Science ®Google Scholar