Investigations on Alkali-Activated Slag/Fly Ash Concrete with steel slag coarse aggregate for pavement structures

References

• Alexander, M.G. and Milne, T.I., 1995. Influence of cement blend and aggregate type on stress–strain behavior and elastic modulus of concrete. ACI Materials Journal, 92, 227–234.
   Web of Science ®Google Scholar
• Alizadeh, R., et al., 1996. Utilization of electric arc furnace slag as aggregates in concrete – environmental issue. Tehran: CMI Report.
   Google Scholar
• Ameri, M., Shahabishahmiri, H., and Kazemzadehazad, S., 2012. Evaluation of the use of steel slag in concrete. In: Proc of the 25th ARRB Confer. Perth: Western Australia, Australia, 9p.
   Google Scholar
• Armaghani, J.M., Larsen, T.J., and Smith, L.L., 1988. Design-related distress in concrete pavements. Concrete International, 10, 43–49.
   Google Scholar
• Australasian Slag Association, 2002. A guide to the use of iron and steel slag in roads, ISBN 0 957705158, Revision 2, Wollongong: Australasian Slag Association Inc. Available from: http://www.asa-inc.org.au/uploads/default/files/asa_guide_to_the_use_of_iron_and_steel_slag_in_roads.pdf.
   Google Scholar
• Bernal, S.A., de Gutiérrez, M.R., and Provis, L.P., 2012. Engineering and durability properties of concretes based on alkali-activated granulated blast furnace slag/metakaolin blends. Construction and Building Materials, 33, 99–108.10.1016/j.conbuildmat.2012.01.017
   Web of Science ®Google Scholar
• Bernard, E. and Dipayan, J., 2003. Forces of hydration that can cause havoc in concrete. ACI Journal, 25, 51–57.
   Google Scholar
• Chen, W. and Brouwers, H.J.H., 2007. The hydration of slag, part 1: reaction models for alkali-activated slag. Journal of Materials Science, 42, 428–443.10.1007/s10853-006-0873-2
   Web of Science ®Google Scholar
• Chi, M. and Huang, R., 2013. Binding mechanism and properties of alkali-activated fly ash/slag mortars. Construction and Building Materials, 40, 291–298.10.1016/j.conbuildmat.2012.11.003
   Web of Science ®Google Scholar
• Diaz-Loya, E.I., Allouche, E.N., and Vaidya, S., 2011. Mechanical properties of fly-ash-based geopolymer concrete. ACI Materials Journal, 108, 300–306.
   Web of Science ®Google Scholar
• Fernández-Jimeénez, A. and Palomo, A., 2005. Composition and microstructure of alkali activated fly ash binder: effect of the activator. Cement and Concrete Research, 35, 1984–1992.10.1016/j.cemconres.2005.03.003
   Web of Science ®Google Scholar
• Fernandez-Jimenez, A., Palomo, J.G., and Puertas, F., 1999. Alkali-activated slag mortars mechanical strength behaviour. Cement and Concrete Research, 29, 1313–1321.10.1016/S0008-8846(99)00154-4
   Web of Science ®Google Scholar
• FHWA, 2012. User guidelines for byproducts and secondary use materials in pavement construction: Steel slag-Material description, Publication Number: FHWA-RD-97-148. United States Department of Transportation – Federal Highway Administration. Available from: https://www.fhwa.dot.gov/publications/research/infrastructure/structures/97148/ssa1.cfm.
   Google Scholar
• Forster, S.W., 2006. Significance of tests and properties of concrete and concrete making materials, chapter 31 – soundness, deleterious substances and coatingsm STP 169D. West Conshohocken, PA: ASTM. DOI: 10.1520/STP169D-EB.
   Google Scholar
• Fruehan, R.J., 1985, The making shaping and treating of steel. 11th ed. Pittsburgh AISE Steel Foundation, United States Steel Corporation, ISBN: 0-930767-02-0.
   Google Scholar
• Gambhir, M.L., 2004, Concrete technology, theory and practice. 4th ed. New Delhi: Tata McGraw-hill (Education) Private Limited.
   Google Scholar
• Ganesan, N., Bharati, R.J., and Shashikala, A.P., 2013. Flexural fatigue behavior of self compacting rubberized concrete. Construction and Building Materials, 44, 7–14.10.1016/j.conbuildmat.2013.02.077
   Web of Science ®Google Scholar
• Gebhardt, R.F., 1988. Rapid methods for chemical analysis of hydraulic cement, STP985. Philadelphia, PA: ASTM. DOI: 10.1520/STP985-EB.
   Google Scholar
• González-Ortega, M.A., et al., 2014. Radiological protection and mechanical properties of concretes with EAF steel slags. Construction and Building Materials, 51, 432–438.10.1016/j.conbuildmat.2013.10.067
   Web of Science ®Google Scholar
• Ismail, I., et al., 2014. Modification of phase evolution in alkali activated blast furnace slag by the incorporation of flyash. Cement and Concrete Composites, 45, 125–135.10.1016/j.cemconcomp.2013.09.006
   Web of Science ®Google Scholar
• Kandhal, P.S. and Hoffman, G.L., 1997. Evaluation of steel slag fine aggregate in hot-mix asphalt mixtures. Transportation Research Record, 1583, 28–36.10.3141/1583-04
   Google Scholar
• Kawamura, M., et al., 1983. Applicability of basic oxygen furnace slag as a concrete aggregate. ACI Journal, 79, 1123–1142.
   Google Scholar
• Kumar, S.K., et al., 2012. Fatigue analysis of high performance cement concrete for pavements using probabilistic approach. International Journal of Emerging Technology and Advanced Engineering, 2, 640–644.
   Google Scholar
• Lee, M.K. and Barr, B.I.G., 2004. An overview of the fatigue behaviour of plain and fiber reinforced concrete. Cement and Concrete Composites, 26, 299–305.10.1016/S0958-9465(02)00139-7
   Web of Science ®Google Scholar
• Lee, W.K.W. and van Deventer, J.S.J., 2002. The effect of ionic contaminants on the early-age properties of alkali-activated fly ash-based cements. Cement and Concrete Research, 32, 577–584.10.1016/S0008-8846(01)00724-4
   Web of Science ®Google Scholar
• Li, H., Zhang, M., and Jin-ping, O., 2007. Flexural fatigue performance of concrete containing nano particles for pavements. International Journal of Fatigue, 29, 1292–1301.10.1016/j.ijfatigue.2006.10.004
   Web of Science ®Google Scholar
• Manso, J., González, J., and Polanco, J., 2004. Electric furnace arc slag in concrete. Journal of Materials in Civil Engineering, ASCE, 16, 639–645.10.1061/(ASCE)0899-1561(2004)16:6(639)
   Web of Science ®Google Scholar
• Maslehuddin, M., et al., 2003. Comparison of properties of steel slag and crushed limestone aggregate concretes. Construction and Building Materials, 17, 105–112.10.1016/S0950-0618(02)00095-8
   Web of Science ®Google Scholar
• Mathur, S., Soni, S.K., and Murty, M., 1999. Utilization of industrial wastes in low-volume roads. Transportation Research Record, 1652, 246–256.10.3141/1652-31
   Google Scholar
• Mohammadi, Y. and Kaushik, S.K., 2005. Flexural fatigue-life distributions of plain and fibrous concrete at various stress levels. Journal of Materials in Civil Engineering, ASCE, 17, 650–658.10.1061/(ASCE)0899-1561(2005)17:6(650)
   Web of Science ®Google Scholar
• Morsy, M.S., Rashad, A.M., and Shebl, S.S., 2008. Effect of elevated temperature on compressive strength of blended cement mortar. Institute of Construction and Architecture, Slovak Academy of Sciences, Building Research Journal, 56, 173–185.
   Google Scholar
• Motz H. and Geiseler J., 2001. Products of steel slags: an opportunity to save natural resources. Waste Management, 21, 285–293.
   Google Scholar
• Netinger, I., Bjegovic, D., and Vrhovac, G., 2011. Utilisation of steel slag as an aggregate in concrete. Materials and Structures, 44, 1565–1575.10.1617/s11527-011-9719-8
   Web of Science ®Google Scholar
• Oh, B.H., 1991. Fatigue life distributions of concrete for various stress levels. ACI Materials Journal, 88, 122–128.
   Web of Science ®Google Scholar
• Papayianni, I., Anastasiou, E., and Papachristoforou, M., 2010. High performance concrete for pavements with steel slag aggregate. In: 2nd international conferance on sustainable construction material and technologies. Ancona: At Università Politecnica delle Marche. Available from: http://www.claisse.info/Proceedings.htm.
   Google Scholar
• Papayianni, I. and Anastasiou, E., 2010. Utilization of electric arc furnace steel slags in concrete products. In: Proc. 6th European slag conference, At Madrid, Spain. At Madrid: Euroslag Publication, ISSN:, 319–334.
   Google Scholar
• Pellegrino, C., et al., 2013. Properties of concretes with black/oxidizing electric arc furnace slag aggregate. Cement and Concrete Composites, 37, 232–240.10.1016/j.cemconcomp.2012.09.001
   Web of Science ®Google Scholar
• Provis, J.L., 2013. Alkali-activated binders and concretes: the path to standardization geopolymer binder systems, STP156620120078. West Conshohocken, PA: ASTM, 185–195.
   Google Scholar
• Provis, J.L., et al., 2012. X-ray microtomography shows pore structure and tortuosity in alkali-activated binders. Cement and Concrete Research, 42, 855–864.10.1016/j.cemconres.2012.03.004
   Web of Science ®Google Scholar
• Puertas, F., et al., 2000. Alkali activated fly ash/slag cement. Strength behaviour and hydration products. Cement and Concrete Research, 30, 1625–1632.
   Web of Science ®Google Scholar
• Rajamane N.P., 2013, Studies on development of ambient temperature cured fly ash and GGBS based geopolymer concretes. PhD thesis. VTU, Belgaum, India.
   Google Scholar
• Ramakrishnan V., C. Meyer, A.E. Naaman, G. Zhao, L. Fang, 1996. Cyclic behaviour fatigue strength, endurance limit and models for fatigue behaviour of FRC. In: A.E. Naaman, and H.W. Reinhardt, eds. High performance fibers reinforced cement composite. 2, London: E & F.N., 101–148. ISBN:0419211802.
   Google Scholar
• Rashad, A.M., Zeedan, S.R., and Hassan, A., 2012. A preliminary study of autoclaved alkali-activated slag blended with quartz powder. Construction and Building Materials, 33, 70–77.10.1016/j.conbuildmat.2011.12.104
   Web of Science ®Google Scholar
• Rashad, A.M. and Zeedan, S.R., 2011. The effect of activator concentration on the residual strength of alkali-activated fly ash pastes subjected to thermal load. Construction and Building Materials, 25, 3098–3107.10.1016/j.conbuildmat.2010.12.044
   Web of Science ®Google Scholar
• Rashad, M.A., 2013. A comprehensive overview about the influence of different additives on the properties of alkali-activated slag – a guide for civil engineer. Construction and Building Materials, 47, 29–55.10.1016/j.conbuildmat.2013.04.011
   Web of Science ®Google Scholar
• Roy, D.M. and Silsbee, M.R., 1992. Alkali activated materials – an overview. Proceedings of Materials Research Society Symposium, 245, 153–164.
   Google Scholar
• Shekarchi M., 2003. In: R. Alizadeh, M. Chini, P. Ghods, M. Hoseini, and S. Montazer, eds. Proc. 6th CANMET/ACI international conference on recent advances in concrete technology, study on electric arc furnace slag properties to be used as aggregates in concrete, June, Bucharest, Romania, 451–464.
   Google Scholar
• Shi, C., Fernandez-, Jimenez A., and Palomo, A., 2011. New cements for the 21st century: the pursuit of an alternative to Portland cement. Cement and Concrete Research, 41, 750–763.10.1016/j.cemconres.2011.03.016
   Web of Science ®Google Scholar
• Sofi, M., et al., 2007. Engineering properties of inorganic polymer concretes. Cement and Concrete Research, 37, 251–257.10.1016/j.cemconres.2006.10.008
   Web of Science ®Google Scholar
• van Der Laan S.R., 2008. In: C.J.G. van Hoek, A. van Zomeren, R.N.J. Comans, J.B.A. Kobesen, and P.G.J. Broersen, eds. Proc. 2nd international conference on accelerated carbonation for environmental and materials engineering, chemical reduction of CO2 to carbon at ambient conditions during artificial weathering of converter steel slag while improving environmental properties, ACEME08, 1–3, October, Rome, Italy, 229–238.
   Google Scholar
• Wang, S.D. and Scrivener, K.L., 1995. Hydration products of alkali-activated slag cement. Cement and Concrete Research, 25, 561–571.10.1016/0008-8846(95)00045-E
   Web of Science ®Google Scholar
• Yang, K.H., et al., 2011. Tests on cementless alkali-activated slag concrete using lightweight aggregates. International Journal of Concrete Structures and Materials, 5, 125–131.
   Google Scholar
• Yildirim, I.Z., and Prezzi, M., 2009. Use of Steel Slag in Subgrade Applications, Publication FHWA/IN/JTRP-2009/32. Joint Transportation Research Program, Indiana Department of Transportation and Purdue University, West Lafayette, Indiana, USA, Available from: http://dx.doi.org/10.5703/1288284314275.
   Google Scholar