515
Views
14
CrossRef citations to date
0
Altmetric
Articles

Economic assessment of use of pond ash in pavements

&
Pages 578-594 | Received 07 Jul 2015, Accepted 23 Jul 2015, Published online: 29 Oct 2015

References

  • Atkinson, V.M., Chaddock, B.C., and Dawson, A.R., 1999. Enabling the use of secondary aggregates and binders in pavement foundations. Crowthorne: Transport Research Laboratory, TRL Report 408.10.1201/9780203885949
  • Bauer, G.E. and Fatani, M.N., 1991. Strength characteristics of sand reinforced with rigid and flexible elements, Proceedings of ix Asian Regional Conference on soil mechanics and foundation engineering, Bangkok, 1, 471–474.
  • Blodgett, S., 2004. Environmental impacts of aggregate and stone mining- New Mexico case study. New Mexico, NM: Center for Science in Public Participation.
  • Bullen, F. and Dawson, A.R., 1991. Furnace bottom ash: its engineering properties and its use as a sub-base material. ICE Proceedings. 90, 993–1009.10.1680/iicep.1991.16187
  • Central Road Research Institute, 2009. Pavement engineering and materials – pavement evaluation. Annual Report 2009–10, 51–76.
  • Chakraborty, T.K. and Dasgupta, S.P., 1996. Randomly reinforced fly ash foundation material, Indian Geotechnical Conference, Madras, India, 1, 231–235.
  • Chakroborty, P. and Das, A., 2003. Principles of transportation engineering. New Delhi: Prentice Hall of India.
  • Chand, S.K. and Subbarao, C., 2007. Strength and slake durability of lime stabilized pond ash. Journal of Materials in Civil Engineering. ASCE, 19 (7), 601–608.10.1061/(ASCE)0899-1561(2007)19:7(601)
  • Chu, T.Y., et al., 1995. Soil stabilization with lime-fly ash mixtures: preliminary studies with silty and clayey soils. Highway Research Board Bulletin, 108, 102–112.
  • Consoli, N.C., Prietto, P.D.M., and Ulbrich, L.A., 1998, Influence of fiber and cement addition on behavior of sandy soil. Journal of Geotechnical and Geoenvironmental Engineering. ASCE, 124 (12), 1211–1214. 10.1061/(ASCE)1090-0241(1998)124:12(1211)
  • Dawson, A.R., et al., 1996. Enabling the use of secondary aggregates and binders in pavement foundations, Results of Phase 2 Study. Link II Project. UK: University of Nottingham.
  • DiGioia, A.M. and Nuzzo, W. L., 1972. Fly ash as structural fill. Journal of Power Division, ASCE, 98 (1), 77–92.
  • Fawconnier, C.J. and Korsten, R.W.O., 1982. Ash fill in pillar design- Increased Underground Extraction of Coal. The SAIMM Monograph Series, 4, 277–361.
  • Galvin, J.M. and Wagner, H., 1982. Use of ash to improve strata control in bord and pillar working. In: Proceedings symposium on strata mechanics. University of Newcastle-upon-Tyne, 264–270.
  • Gopalan, M.K. and Haque, M.N., 1986. Strength development of clinically cured plain fly ash concretes, In Proceedings of Australian Road Research Board, vol. 13, Pt. 5, 27–33.
  • Gray, D.H. and Maher, M.H., 1989. Admixture stabilization of sand with discrete randomly distributed fibers. Proceedings of XII international conference on soil mechanics and foundation engineering, Rio de Janeiro, Brazil, vol. 2, 1363–1366.
  • Gray, D.H., Tons, E., and Thiruvengadam, T.R., 1994. Performance evaluation of a cement-stabilized fly ash base. Transportation Research Record, 1440, 51–59.
  • Gulhati, S.K. and Datta, M., 1999. Geotechnical engineering. New Delhi: Tata McGraw-Hill.
  • Hoover, J., et al., 1982. Performance of randomly oriented fiber-reinforced roadway soils: A laboratory and field investigation. Iowa DOT Project HR-211, Iowa State University, Department of Civil Engineering, Ames, Iowa.
  • Huang, Y.H., 1993. Pavement analysis and design. Englewood Cliffs: Prentice-Hall.
  • IRC:37, 2001. Guidelines for the design of flexible pavement. New Delhi: Indian Roads Congress.
  • IRC:86, 1983. Geometric design standards for urban roads in plains. New Delhi: Indian Roads Congress.
  • Joshi, R.C., Natt, G.S., and Wright, P.J., 1981. Soil improvement by lime-fly ash slurry injection, In: Proceedings of 10th International Conference on Soil Mechanics & Foundation Engineering, Stockholm, vol. 3, 707–712.
  • Kaniraj, S.R. and Havanagi, V.G., 2001. Behavior of cement-stabilized fiber-reinforced fly ash-soil mixtures. Journal of Geotechnical and Geoenvironmental Engineering, ASCE, 127 (7), 574–584.10.1061/(ASCE)1090-0241(2001)127:7(574)
  • Ksaibati, K. and Bowen, M.M., 2001. Utilization of bottom ash in pavement bases, In: T.T. Eighmy, ed. Proceedings of Beneficial Use of Recycled Materials in Transportation Applications, Edi. , Nov. 13–15, Arlington, Virginia, 875–884.
  • Ksaibati, K. and Conklin, T.L., 1994. Field performance evaluation of cement-treated bases with and without fly ash. Transportation Research Record, 1440, 16–21.
  • Kumar, P. and Singh, S.P., 2008. Fiber-reinforced fly ash subbases in rural roads. Journal of Transportation Engineering. ASCE, 134, 171–180.10.1061/(ASCE)0733-947X(2008)134:4(171)
  • Kumar, R., Kanaujia, V.K., and Chandra, D., 1996. Engineering behaviour of fibre-reinforced pond ash and silty sand. J. Geosynthetics Internationals 1996, 6 (6), 509–518.10.1680/gein.6.0162
  • Lee, S.W. and Fishman, K.L., 1993. Resilient and plastic behavior of classifier tailings and fly ash mixtures. Transportation Research Record, 1418, 8–15.
  • Lee, K.W., et al., 2001. Structural analysis of New England subbase materials and structures. The New England Transportation Consortium, Report of Project No. 94-1 (NETCR 26). Connecticut, CT.
  • Loulizi, A., et al., 2006. Comparing resilient modulus and dynamic modulus of hot-mix asphalt as material properties for flexible pavement design, Transportation Research Record: Journal of the Transportation Research Board of the National Academies, Washington, DC, 161–170.
  • Maher, M.H. and Gray, D.H., 1990. Static response of sands reinforced with randomly distributed fibers. Journal of Geotechnical Engineering, ASCE, 116 (11), 1661–1667.
  • Maher, M.H. and Ho, Y.C., 1994. Mechanical-properties of kaolinite fiber soil composite. Journal of Geotechnical Engineering, ASCE, 120 (8), 1381–1393.
  • Maser, K.R., Wallhagen, R.E., and Dieckman, J., 1975. Development of fly ash cement mine sealing system, USBM, Open File Report 26-76, NTIS –PB-250611.
  • Michalowski, R.L. and Zhao, A., 1996. Failure of fiber-reinforced granular soils. Journal of Geotechnical Engineering, ASCE, 122 (3), 226–23410.1061/(ASCE)0733-9410(1996)122:3(226)
  • Mishra, M.K. and Karanam, U.M., 2006. Geotechnical characterization of fly ash composites for backfilling mine voids. Geotechnical and Geological Engineering, 24 (6), 1749–1765.10.1007/s10706-006-6805-8
  • MORT&H, 2011. Report of the working group on central roads sector, 12th Five Year Plan (2012–17), Ministry of Road Transport & Highways, Government of India.
  • Nataraj, M.S. and McManis, K.L., 1997. Strength and deformation properties of soils reinforced with fibrillated fibers. Geosynthetics International, 4 (1), 65–79.10.1680/gein.4.0089
  • Ornebjerg, H., et al., 2006. Management of bottom ash from WTE plants - an overview of management options and treatment methods. Report of Working Group on Thermal Treatment of Waste. Kongens Lyngby: International Solid Waste Association.
  • Palariski, J., 1993. The use of fly ash tailings, rock and binding agents as consolidated backfill for coal mines. In: H.W. Gelen, ed. Proceedings of Mine fill. Johannesburg: SAIMM, 403–408.
  • Raymon, S., 1961. Pulverized fuel ash as embankment material. ICE Proceedings, 19, 515–536.10.1680/iicep.1961.11308
  • Santoni, R.L. and Webster, S.L., 2001. Airfields and roads construction using fiber stabilization of sands. Journal of Transportation Engineering, ASCE, 127 (2), 96–104.10.1061/(ASCE)0733-947X(2001)127:2(96)
  • Sarkar, R., Abbas, S.M., and Shahu, J.T., 2012. A comparative study of geotechnical behaviour of lime stabilized pond ashes from Delhi region. International Journal of GEOMATE, 3 (1), 273–279.
  • Setty, K.R.N.S. and Rao, S.V.G., 1987. Characteristics of fibre reinforced lateritic soils, Indian geotechnical conference. Banglore, India, 1, 329–333.
  • Sherwood, P., 1995. Alternative materials in road construction. London: Thomas Telford Publishing.
  • Shewbridge, S.E. and Sitar, N., 1989. Deformation characteristics of reinforced sand in direct shear. Journal of Geotechnical Engineering, ASCE, 115 (8), 1134–1147.10.1061/(ASCE)0733-9410(1989)115:8(1134)
  • Shodhganga. 2006. Engineering properties of subgrade soils, moorum and aggregate. Available from: http://shodhganga.inflibnet.ac.in/bitstream/10603/8702/12/12_chapter%204.pdf
  • Singh, S.P. and Kumar, P., 2005. Utilization of fibre reinforced flyash in road sub-bases, Fly Ash Utilization Programme (FAUP). TIFAC, DST, New Delhi, VIII 17.1–17.8.
  • Singh, S.P. and Ramaswamy, S.V., 2005. Utilization potential of cement stabilized flyash-gbfs mixes in highway construction, Fly Ash Utilization Programme (FAUP). TIFAC, DST, New Delhi, VIII, 4.36–14.11.
  • Sinha, A.K., 2009. Study on subbase materials for rural roads. Thesis (PhD). Dept. of Civil Engineering, IIT-Roorkee.
  • Subbarao, C., et al., 2001. Fly ash and stabilized fly ash as construction materials, Proceedings of International Conference on Advances in Civil Engineering, 1085–1092.
  • Theyse, H.L., 2002, Stiffness, strength, and performance of unbound aggregate material: application of South African HVS and laboratory results to California flexible pavements. University of California, Report – California Partnered Pavement Research Program.
  • Tirumala, K.G., 2007. Geotechnical characteristics of pond ash mixed with randomly oriented Fibres. MTech thesis. Depatment of Civil Engineering, IIT-Delhi.
  • Titi, H.H., Coenen, A.R., and Elias, M.B., 2009. Resilient characteristics of bottom ash. In: E. Tutumluer and I.L. Al-Qadi, eds. Bearing Capacity of Roads, Railways and Airfields, London: Taylor & Francis Group, 117–124. ISBN 978-0415-87199-0.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.