Assessment of the relationship between the international roughness index and dynamic loading of heavy vehicles

References

• Allen II, J., 2007. Rigid ring quarter-vehicle model for durability and ride comfort predictions. Master’s thesis. Pennsylvania State University.
   Google Scholar
• Asphalt Institute, 1991. Thickness design-asphalt pavements for highways and streets. 9th ed. Lexington, KY: Asphalt Institute, Manual Series No. 1 (MS-1).
   Google Scholar
• Besselink, I.J.M., 2000. Shimmy of aircraft main landing gears. Thesis (PhD). Delft University of Technology.
   Google Scholar
• Cebon, D., 1986. Road damaging effects of dynamic axle loads. In: Proceedings of 9th International symposium on heavy vehicles weights and dimensions. 8–13 June, Kelowna, Canada, 37–53.
   Google Scholar
• Cebon, D., 1999. Handbook of vehicle-road interaction. Lisse: Swets & Zeitlinger. (Ed.).
   Google Scholar
• Collop, A. and Cebon, D., 1995. A model of whole-life flexible pavement performance. Proceedings of the institution of mechanical engineers, Journal of Mechanical Engineering Science, 209, pp. 389–408. ISSN .
   Google Scholar
• Doré, G., Konrad, J.M., and Roy, M., 1997. Role of deicing salt in pavement deterioration by frost action. Transportation Research Record: Journal of the Transportation Research Board, 1596, 70–75.
   Google Scholar
• Doré, G. and Zubeck, H. 2008. Cold regions pavement engineering. New York NY: McGraw-Hill.
   Google Scholar
• Frey, N.W., 2009. Development of a rigid ring tire model and comparison among various tire models for ride comfort simulations. Master’s thesis. Clemson University.
   Google Scholar
• Gagnon, L., 2013. Développement d’un modèle dynamique et quantification de l’influence du profil de la route sur un véhicule [Development of a dynamic model and quantification of the influence of road roughness on vehicles]. Dissertation (PhD). Université Laval, Québec, Canada.
   Google Scholar
• Gagnon, L., Doré, G., and Richard, M., 2014a. An overview of various new road profile quality evaluation criteria: part 1. International Journal of Pavement Engineering, 16 (3), 223–238.
   Web of Science ®Google Scholar
• Gagnon, L., Doré, G., and Richard, M., 2014b. An overview of various new road profile quality evaluation criteria: part 2. International Journal of Pavement Engineering, 16(9), 784–796. doi:10.1080/10298436.2014.960998
   Web of Science ®Google Scholar
• Gagnon, L., et al., 2014c. An implicit rigid ring tire model for multibody simulation with energy dissipation. Tire Science and Technology: April–June 2014, 42 (2), 62–84.
   Google Scholar
• Gagnon, L., Richard, M., and Doré, G., 2015. A multibody dynamics model to assess the impact of road unevenness on the efficiency of a semitrailer truck. International Journal of Vehicle Systems Modelling and Testing, 10 (1), 1–28.10.1504/IJVSMT.2015.067519
   Google Scholar
• Hammarström, U., et al., 2010. Coast down measurements with 60 tonnes articulated truck - estimation of transmission, rolling and air resistance. Linköping: The Swedish National Road and Transport Research Institute, Report 15A.
   Google Scholar
• Hassan, R., 2012. Highlighting dynamically loaded pavement sections with profile indices. Transportation Research Record: Journal of the Transportation Research Board, No. 2306. Washington, DC: Transportation Research Board of the National Academies, pp. 65–72. DOI: 10.3141/2306-08
   Google Scholar
• Maas, J.W.L.H., 2009. A comparison of dynamic tyre models for vehicle shimmy stability analysis. Master’s thesis. Eindhoven University of Technology.
   Google Scholar
• Masarati, P., 2012. MBDyn 1.5 source code [ online]. Available from: http://www.mbdyn.org [ Accessed 2012].
   Google Scholar
• Masarati, P., Morandini, M., and Mantegazza, P., 2014. An efficient formulation for general-purpose multibody/multiphysics analysis. Journal of Computational and Nonlinear Dynamics, 9 (4), 041001 (9 pp.). doi:10.1115/1.4025628.
   Google Scholar
• Maurice, J.P., 2000. Short wavelength and dynamic tyre behaviour under lateral and combined slip conditions. Thesis (PhD). Delft University of Technology.
   Google Scholar
• Pacejka, H.B., 2006. Society of Automotive Engineers. Tire and Vehicle Dynamics. SAE-R. Society of Automotive Engineers, Incorporated.
   Google Scholar
• Poelman, M.A. and Weir, R.P., 1992. Vehicle fatigue induced by road surface roughness. Philadelphia, PA: American Society for Testing and Materials Special Technical Publication, No. 1164. 97–111.
   Google Scholar
• Quinn, R.E. and Van Wyk, R.A., 1961. Method for introducing dynamic wheel loads into design of roadways. Proceedings of Highway Research Board, 40, 111–124.
   Google Scholar
• SAE, 2008. Road load measurement using onboard anemometry and coastdown techniques. Vol. J2263. Warrendale, PA: Society of Automotive Engineers.
   Google Scholar
• Sayers, M., 1985. Development, implementation, and application of the reference quarter-car simulation. In: T.D. Gillespie and Mickael Sayers eds. Measuring road roughness and its effects on user cost and comfort. American Society for Testing and Materials Special Technical Publication no 884, Philadelphia, PA: American Society for Testing and Materials, pp. 25–47.
   Google Scholar
• Sayers, M. and Gillespie, T.D., 1981. The effect of suspension system nonlinearities on heavy guck vibration. Proceedings of 7th IAVSD Symposium on the Dynamics of Vehicles on Roads and on Tracks, Lisse: Swets & Zeitlinger, 7–11 September, Cambridge, UK, pp. 154–166.
   Google Scholar
• Sayers, M.W. and Karamihas, S.M., 1998. The little book of profiling. Ann Arbor, MI: UMTRI.
   Google Scholar
• Schmeitz, A.J.C., 2004. A semi-empirical three-dimensional model of the pneumatic tyre rolling over arbitrarily uneven road surfaces. Thesis (PhD). Delft University of Technology.
   Google Scholar
• Sweatman, P.F., 1983. A study of dynamic wheel forces in axle group suspensions of heavy vehicles. Vermont South: Australian Road Research Board (ARRB), Special Report no 27.
   Google Scholar
• Vaillancourt, M., 2004. Méthodologie de modélisation de l’uni des chausses souples et impact des sols d’infrastructure [Modelization methodology of flexible pavement smoothness and influence of subgrade soil]. Dissertation (PhD). ÉTS, Montréal.
   Google Scholar
• Vaillancourt, M., et al., 2002. Décomposition du pseudoprofil et analyse de l’indice de rugosité international (IRI) [Breakdown of pseudo-profile and analysis of international roughness index (IRI)]. Canadian Journal of Civil Engineering, 30, 923–933.
   Web of Science ®Google Scholar
• Woodroofe, J.H.F., LeBlanc, P.A., and LePiane, K.R., 1986. Vehicle weights and dimensions study; volume 11 – effects of suspension variations on the dynamic wheel loads of a heavy articulated highway vehicle. Canroad Transportation Technical report, Roads and Transportation Association of Canada (RTAC).
   Google Scholar
• Zegelaar, P.W.A., 1998. The dynamic response of tyres to brake torque variations and road unevennesses. Thesis (PhD). Delft University of Technology.
   Google Scholar