References
- AASHTO T316, 2013. Standard test method for viscosity determination of asphalt at elevated temperatures using a rotational viscometer. Washington, DC: STANDARD byAmerican Association of State and Highway Transportation officials.
- Alhasan, A., et al., 2014. Low-temperature characterization of foamed warm-mix asphalt produced by water injection. In: Transportation research record: journal of the transportation research board, No. 2445. Washington, DC: Transportation Research Board of the National Academies, 1–11.
- Arega, Z., et al., 2014. Characteristics of asphalt binders foamed in the laboratory to produce warm mix asphalt. Journal of Materials in Civil Engineering, 26, 1 – 10
- Estakhri, C., Button, J., and Alvarez, A., 2010. Field and laboratory investigation of warm mix asphalt in texas, FHWA/TX-10/0-5597-2, July 2010. College Station, TX:Texas Department of Transportation, Texas Transportation Institute.
- Gandhi, T., Akisetty, C., and Amirkhanian, S., 2009. Laboratory evaluation of warm asphalt binder aging characteristics. International Journal of Pavement Engineering, 10 (5), 353–359.10.1080/10298430802342724
- Gandhi, T., Rogers, W., and Amirkhanian, S., 2010. Laboratory evaluation of warm mix asphalt ageing characteristics. International Journal of Pavement Engineering, 11 (2), 133–142.10.1080/10298430903033339
- Harman, T., D’Angelo, J., and Bukowski, J., 2002. Superpave asphalt mixture design workshop workbook, Version 8.0, U.S. Department of Transportation, Federal Highway Administration.
- Hossain, Z., et al., 2012. Effectiveness of water-bearing and anti-stripping additives in warm mix asphalt technology. International Journal of Pavement Engineering, 13 (5), 424–432.10.1080/10298436.2011.616588
- Kanitpong, K., Charoentham, N., and Likitlersuang, S., 2012. Investigation on the effects of gradation and aggregate type to moisture damage of warm mix asphalt modified with Sasobit. International Journal of Pavement Engineering, 13 (5), 451–458.10.1080/10298436.2011.565058
- Kavussi, A. and Hashemian, L., 2012. Laboratory evaluation of moisture damage and rutting potential of WMA foam mixes. International Journal of Pavement Engineering, 13 (5), 415–423.10.1080/10298436.2011.597859
- Kheradmand, B., et al., 2014. An overview of the emerging warm mix asphalt technology. International Journal of Pavement Engineering, 15 (1), 79–94.10.1080/10298436.2013.839791
- Lee, J. and Kim, Y., 2014. Performance-based moisture susceptibility evaluation of warm-mix asphalt concrete through laboratory tests. In: Transportation research record: journal of the transportation research board, No. 2446. Washington, DC: Transportation Research Board of the National Academies, 17–28.
- Mejías-Santiago, M., Doyle, J., and Rushing, J., 2014. Accelerated pavement testing of warm-mix asphalt for heavy-traffic airfields. In: Transportation research record: journal of the transportation research board, No. 2456. Washington, DC: Transportation Research Board of the National Academies, 11–20.
- Newcomb, D., et al., 2015. Properties of foamed asphalt for warm mix asphalt applications, NCHRP Report 807. National cooperative highway research program. Washington, DC: Transportation Research Board.
- Ozturk, H. and Kutay, M., 2014. Sensitivity of nozzle-based foamed asphalt binder characteristics to foaming parameters. In: Transportation research record: journal of the transportation research board, No. 2444. Washington, DC: Transportation Research Board of the National Academies, 120–129.
- Shivaprasad, P., Xiao, F., and Amirkhanian, S., 2012. Evaluation of moisture sensitivity of stone matrix asphalt mixtures using polymerised warm mix asphalt technologies. International Journal of Pavement Engineering, 13 (2), 152–165.10.1080/10298436.2011.643792
- Wirtgen GmbH, 2008. Suitability test procedures of foam bitumen using Wirtgen WLB 10 S. Germany: Wirtgen Group, Wirtgen GmbH.
- Xiao, F., et al., 2012. Laboratory investigation of moisture susceptibility of long-term saturated warm mix asphalt mixtures. International Journal of Pavement Engineering, 13 (5), 401–414.10.1080/10298436.2011.585649