177
Views
5
CrossRef citations to date
0
Altmetric
Articles

Monitoring of bitumen hardening with a non-destructive ultrasonic shear wave reflection technique

, , &
Pages 560-566 | Received 21 May 2015, Accepted 25 Dec 2015, Published online: 01 Feb 2016

References

  • Chotard, T., et al, 2001. Application of ultrasonic testing to describe the hydration of calcium aluminate cement at the early age. Cement and Concrete Research, 31 (3), 405–412.10.1016/S0008-8846(00)00446-4
  • Chung, C.W., 2010. Ultrasonic wave reflection measurements on stiffening and setting of cement paste. Thesis (PhD). University of Illinois.
  • Chung, C.W., et al, 2012. Setting time measurement using ultrasonic wave reflection. ACI Materials Journal, 109 (1), 109–118.
  • Chung, C.W., et al, 2012. Application of ultrasonic P-wave reflection to measure development of early-aged cement-paste properties. Materials and Structures, 46, 987–997.
  • DIN 52013, 2007. Bitumen and bituminous binders – determination of ductility. June, 2007.
  • Dolinšek, J., et al, 2000. Temperature-dependent bitumen softening studied by NMR. Journal of Physics D: Applied Physics, 33, 1615–1624.10.1088/0022-3727/33/13/310
  • EN 12593, 2007. Bitumen and bituminous binders – determination of the Fraass breaking point. July, 2007.
  • EN 12596, 2007. Bitumen and bituminous binders – determination of the dynamic viscosity by vacuum capillary. May, 2007.
  • EN 1426, 2007. Bitumen and bituminous binders – determination of needle penetration. July, 2007.
  • EN 1426, 2007. Bitumen and bituminous binders – determination of the softening point – Ring and Ball method. July, 2007.
  • Hays, W., 1991. Statistics. 5th ed. Harcour Brace College Publishers, San Diego (CA).
  • Khalili, M. and Karakouzian, M., 2014. Feasibility of ultrasonic measurements for characterizing rheological properties of asphalt binders. Construction and Building Materials, 75 (2015), 220–226.
  • Lionetto, F. and Maffezzoli, A., 2008. Polymer characterization by ultrasonic wave propagation. Advances in Polymer Technology, 27 (2), 63–73.
  • Mouton, Y., 2006. Organic materials in civil engineering. 1st ed. Wiley-ISTE, London.10.1002/9780470612316
  • Ozturk, T., Krogel, O., Grubl, P., and Popovics, J.S., 2006. Improved ultrasonic wave reflection technique to monitor the setting of cement-based materials. NDT & E International, 39 (4), 258–263.10.1016/j.ndteint.2005.06.012
  • Ramanathan, K., Stallings, R.L., and Newsome, J.R., 1991. An ultrasonic technique for the measurement of adhesion of asphalt to aggregate. Journal of Adhesion Science and Technology, 5 (3), 181–190.10.1163/156856191X00134
  • Reinhardt, H.W. and Grosse, C.U., 2004. Continuous monitoring of setting and hardening of mortar and concrete. Construction and Building Materials, 18, 145–154.10.1016/j.conbuildmat.2003.10.002
  • Richard, J.D., 1965. Ultrasonic viscosimeter US 3194057 A. Available from: http://www.google.com/patents/US3194057 [Accessed 3 October 2013].
  • Sheen, S.H., Chien, H.T., and Raptis, A.C., 1997. Ultrasonic methods for measuring liquid viscosity and volume percent of solids. Available from: http://www.osti.gov/scitech/servlets/purl/477669 [Accessed 3 October 2013].
  • SIST EN 13398, 2010. Bitumen and bituminous binders – determination of the elastic recovery of modified bitumen. October, 2010.
  • SIST EN ISO 3838, 2004. Crude petroleum and liquid or solid petroleum products – determination of density or relative density – Capillary-stoppered pycnometer and graduated bicapillary pycnometer methods (ISO 3838:2004). September, 2004.
  • Sun, Z., Voigt, T., and Shah, S.P., 2006. Rheometric and ultrasonic investigations of viscoelastic properties of fresh Portland cement pastes. Cement and Concrete Research, 36 (2), 278–287.10.1016/j.cemconres.2005.08.007
  • The University of Chicago, 1994. Method for measuring liquid viscosity and ultrasonic viscometer. Available from: http://www.google.com/patents/US5365778 [Accessed 3 October 2013].
  • Trtnik, G. and Gams, M., 2014. Recent advances of ultrasonic testing of cement based materials at early ages. Ultrasonics, 54 (1), 66–75.10.1016/j.ultras.2013.07.010
  • Trtnik, G., Valič, M.I., and Turk, G., 2013. Measurement of setting process of cement pastes using non-destructive ultrasonic shear wave reflection technique. NDT & E International, 56, 65–75.10.1016/j.ndteint.2013.02.004
  • Valič, M.I., 2000. Hydration of cementitious materials by pulse echo USWR. Method, apparatus and application examples. Cement and Concrete Research, 30 (10), 1633–1640.
  • Valič, M.I. and Stepišnik, J., 1998a. A study of cement pastes by reflection of ultrasonic shear waves. Part I: apparatus, experimental method and application examples. Kovine, Zlitine, Tehnoligije, 32 (6), 551–560.
  • Valič, M.I. and Stepišnik, J., 1998b. An ultrasonic shear wave apparatus and its applications in materials research. In: 34th International conference on microelectronics. Rogaška Slatina: Devices and Materials.
  • Valič, M.I. and Vuk, T., 2000. A study of the influence of additives and admixtures on the hydration of cement with pulsed USWR method. Materials and Technology, 34 (5), 249–255.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.