References
- AASHTO, 2004. Guide for mechanistic-empirical design of new and rehabilitated pavement structures. Washington, DC: National Research Council.
- ACI, 1997. State-of-the-art report on soil cement. ACI Materials Journal, 87 (4), 395–417.
- Al-Amoudi, O.S.B., Khan, K., and Al-Kahtani, N.S., 2010. Stabilization of a Saudi calcareous marl soil. Construction and Building Materials, 24 (10), 1848–1854. Available from: http://www.sciencedirect.com/science/article/pii/S095006181000139X10.1016/j.conbuildmat.2010.04.019
- ARMY, 1994. Soil stabilization for pavements. Washington, DC: Department of the Army, the Navy, and the Air Force, TM 5-822-14/ AFJMAN 32-1019.
- Baghaee Moghaddam, T., Soltani, M., and Karim, M.R., 2014. Evaluation of permanent deformation characteristics of unmodified and polyethylene terephthalate modified asphalt mixtures using dynamic creep test. Materials & Design, 53, 317–324. Available from: http://www.sciencedirect.com/science/article/pii/S0261306913006390
- Barluenga, G. and Hernández-Olivares, F., 2004. SBR latex modified mortar rheology and mechanical behaviour. Cement and Concrete Research, 34 (3), 527–535. Available from: http://www.sciencedirect.com/science/article/pii/S000888460300324710.1016/j.cemconres.2003.09.006
- Basha, E.A., et al., 2005. Stabilization of residual soil with rice husk ash and cement. Construction and Building Materials, 19 (6), 448–453. Available from: http://www.sciencedirect.com/science/article/pii/S095006180400173410.1016/j.conbuildmat.2004.08.001
- Behiry, A., 2013. Utilization of cement treated recycled concrete aggregates as base or subbase layer in Egypt. Ain Shams Engineering Journal, 4 (4), 661–673. Available from: http://www.sciencedirect.com/science/article/pii/S209044791300030010.1016/j.asej.2013.02.005
- Eren, Ş. and Filiz, M., 2009. Comparing the conventional soil stabilization methods to the consolid system used as an alternative admixture matter in Isparta Darıdere material. Construction and Building Materials, 23 (7), 2473–2480. Available from: http://www.sciencedirect.com/science/article/pii/S095006180900003810.1016/j.conbuildmat.2009.01.002
- Fowler, D.W., 1999. Polymers in concrete: a vision for the 21st century. Cement and Concrete Composites, 21 (5–6), 449–452. Available from: http://www.sciencedirect.com/science/article/pii/S095894659900032310.1016/S0958-9465(99)00032-3
- Garber, S., Rasmussen, R.O., and Harrington, D., 2011. Guide to cement-based integrated pavement solutions. Institute for Transportation, Portland Cement Association, Iowa State University, US, Association, P.C., IPS 08221.
- Goodary, R., et al., 2012. Investigation of the strength development in cement-stabilised soils of volcanic origin. Construction and Building Materials, 28 (1), 592–598. Available from: http://www.sciencedirect.com/science/article/pii/S095006181100487910.1016/j.conbuildmat.2011.08.054
- Horpibulsuk, S., et al., 2010. Analysis of strength development in cement-stabilized silty clay from microstructural considerations. Construction and Building Materials, 24 (10), 2011–2021. Available from: http://www.sciencedirect.com/science/article/pii/S095006181000103010.1016/j.conbuildmat.2010.03.011
- Ismail, A., et al., 2014. Laboratory investigation on the strength characteristics of cement-treated base. Applied Mechanics and Materials, 507 (3), 353–360.10.4028/www.scientific.net/AMM.507
- Jones, D., et al., 2010. Guidelines for the stabilization of subgrade soils in California. California: Institute of Transportation Studies, University of California, Pavement Research Center, UCD-ITS-RR-10-38.
- Kenis, W.J., 1978. Predictive design procedures, vesys users manual-an interim design method for flexible pavements using the vesys structural subsystem. Washington, DC: U. S. Department of Transportation, Offices of Research & Development, FHWA-RD-77-154.
- Khodaii, A. and Mehrara, A., 2009. Evaluation of permanent deformation of unmodified and SBS modified asphalt mixtures using dynamic creep test. Construction and Building Materials, 23 (7), 2586–2592. Available from: http://www.sciencedirect.com/science/article/pii/S095006180900046410.1016/j.conbuildmat.2009.02.015
- Lade, P.V., Liggio, C., and Yamamuro, J.A., 1998. Effects of non-plastic fines on minimum and maximum void ratios of sand. ASTM geotechnical testing journal, 21 (4), 336–347.
- Lytton, R.L., et al., 1993. Development and validation of performance prediction models and specifications for asphalt binders and paving mixes. Washington, DC: National Research Council, Strategic Highway Research Program.
- Majidzadeh, K., et al., 1980. Implementation of a pavement design system. Vol. 1 and 2. Columbus: Ohio State University.
- Monismith, C.L., Ogawa, N., and Freeme, C., 1975. Permanent deformation characteristics of subgrade soils due to repeated loading. Transportation Research Record, 537, 1–17.
- NCHRP, 2013. Characterization of cementitiously stabilized layers for use in pavement design and analysis. Pullman: Washington State University.
- Ohama, Y., 1987. Principle of latex modification and some typical properties of latex-modified mortars and concretes adhesion; binders (materials); bond (paste to aggregate); carbonation; chlorides; curing; diffusion. ACI Materials Journal, 84 (6), 511–518.
- Ohama, Y., 1996. Polymer-based materials for repair and improved durability: Japanese experience. Construction and Building Materials, 10 (1), 77–82. Available from: http://www.sciencedirect.com/science/article/pii/095006189500063110.1016/0950-0618(95)00063-1
- PCA, 1992. Soil-cement laboratory handbook (astm/aashto soil-cement testing procedures). Skokie, IL: Cornell University, Portland Cement Association.
- Pérez, P., et al., 2013. Application of cement-treated recycled materials in the construction of a section of road in Malaga, Spain. Construction and Building Materials, 44, 593–599. Available from: http://www.sciencedirect.com/science/article/pii/S095006181300153010.1016/j.conbuildmat.2013.02.034
- Rossignolo, J.A. and Agnesini, M.V.C., 2004. Durability of polymer-modified lightweight aggregate concrete. Cement and Concrete Composites, 26 (4), 375–380. Available from: http://www.sciencedirect.com/science/article/pii/S095894650300022210.1016/S0958-9465(03)00022-2
- Sariosseiri, F. and Muhunthan, B., 2009. Effect of cement treatment on geotechnical properties of some Washington state soils. Engineering Geology, 104 (1–2), 119–125.10.1016/j.enggeo.2008.09.003
- Scullion, T., et al., 2008. Thickness design systems for pavements containing soil cement bases, PCA R&D SN2863. Skokie, IL: Portland Cement Association.
- Shaker, F.A., El-Dieb, A.S., and Reda, M.M., 1997. Durability of styrene-butadiene latex modified concrete. Cement and Concrete Research, 27 (5), 711–720. Available from: http://www.sciencedirect.com/science/article/pii/S000888469700055010.1016/S0008-8846(97)00055-0
- Shojaei Baghini, M., et al., 2014. Effect of styrene–butadiene copolymer latex on properties and durability of road base stabilized with Portland cement additive. Construction and Building Materials, 68, 740–749. Available from: http://www.sciencedirect.com/science/article/pii/S095006181400680110.1016/j.conbuildmat.2014.06.061
- Tseng, K.-H. and Lytton, R.L., 1989. Prediction of permanent deformation in flexible pavement materials. Transportation Research Record: Journal of the Transportation Research Board, 17 (2), 154–172.
- Valkering, C., et al., 1990. Rutting resistance of asphalt mixes containing non-conventional and polymer-modified binders (with discussion and closure). Journal of the Association of Asphalt Paving Technologists, 59, 590–609.
- Van Gemert, D., et al., 2005. Cement concrete and concrete–polymer composites: two merging worlds. Cement and Concrete Composites, 27 (9–10), 926–933. Available from: http://www.sciencedirect.com/science/article/pii/S0958946505000612 [Accessed November 2005].10.1016/j.cemconcomp.2005.05.004
- Vegas, I., et al., 2011. Pre-normative research on the use of mixed recycled aggregates in unbound road sections. Construction and Building Materials, 25 (5), 2674–2682. Available from: http://www.sciencedirect.com/science/article/pii/S095006181000695110.1016/j.conbuildmat.2010.12.018
- Wang, R., Wang, P.-M., and Li, X.-G., 2005. Physical and mechanical properties of styrene–butadiene rubber emulsion modified cement mortars. Cement and Concrete Research, 35 (5), 900–906. Available from: http://www.sciencedirect.com/science/article/pii/S000888460400313810.1016/j.cemconres.2004.07.012
- West, R.C., Zhang, J., and Allen Cooley, J., 2004. Evaluation of the asphalt pavement analyzer for moisture sensitivity testing. Auburn, AL: Auburn University, NCAT Report 04-04.
- Witzcak, M.W., 2002. Simple performance test for superpave mix design. National Cooperative Highway Research Program, National Research Council (U.S.). Transportation Research Board, American Association of State Highway and Transportation Officials: Transportation Research Board.
- Yang, Z., et al., 2009. Effect of styrene–butadiene rubber latex on the chloride permeability and microstructure of Portland cement mortar. Construction and Building Materials, 23 (6), 2283–2290. Available from: http://www.sciencedirect.com/science/article/pii/S095006180800345010.1016/j.conbuildmat.2008.11.011
- Zhou, F., Scullion, T., and Sun, L., 2004. Verification and modeling of three-stage permanent deformation behavior of asphalt mixes. Journal of Transportation Engineering, 130 (4), 486–494. Available from: http://ascelibrary.org/doi/abs/10.1061/%28ASCE%290733-947X%282004%29130%3A4%28486%2910.1061/(ASCE)0733-947X(2004)130:4(486)