Characterisation of high-performance cold bitumen emulsion mixtures for surface courses

References

• Al-Busaltan, S., et al., 2012. Mechanical properties of an upgrading cold-mix asphalt using waste materials. Journal of Materials in Civil Engineering, 24 (12), 1484–1491.10.1061/(ASCE)MT.1943-5533.0000540
   Web of Science ®Google Scholar
• Al-Hdabi, A., et al., 2014. Laboratory studies to investigate the properties of novel cold-rolled asphalt containing cement and waste bottom ash. Road Materials and Pavement Design, 15 (1), 78–89.10.1080/14680629.2013.852612
   Web of Science ®Google Scholar
• Benhelal, E., et al., 2013. Global strategies and potentials to curb CO2 emissions in cement industry. Journal of Cleaner Production, 51, 142–161.10.1016/j.jclepro.2012.10.049
   Web of Science ®Google Scholar
• Bocci, M., et al., 2011. A study on the mechanical behaviour of cement–bitumen treated materials. Construction and Building Materials, 25 (2), 773–778.10.1016/j.conbuildmat.2010.07.007
   Web of Science ®Google Scholar
• Dondi, G., et al., 2014. Crumb rubber in cold recycled bituminous mixes: comparison between traditional crumb rubber and cryogenic crumb rubber. Construction and Building Materials, 68, 370–375.10.1016/j.conbuildmat.2014.06.093
   Web of Science ®Google Scholar
• Eckmann, B., Delfosse, F., and Conan, J., 2004. Cold bituminous mixtures for surface courses. In: Proceedings of the 3rd eurasphalt and eurobitume congress. Vienna.
   Google Scholar
• Ellis, C., et al., 2004. Properties of GGBS-bitumen emulsion systems with recycled aggregates. Road Materials and Pavement Design, 5 (3), 373–383.10.1080/14680629.2004.9689977
   Google Scholar
• European Committee for Standarization, 2005a. Bs en 4987-1: 2005 coated macadam (asphalt concrete) for roads and other paved areas. In: Part 1: specification for constituent materials and for mixtures. London: British Standards Institution.
   Google Scholar
• European Committee for Standarization, 2005b. Bs en 12697-25 bituminous mixtures. Test methods for hot mix asphalt. In: Part 25: cyclic compression test. London: British Standards Institution.
   Google Scholar
• European Committee for Standarization, 2012. Bs en 12697-26: bituminous mixtures: Test methods for hot mix asphalt. In: Part 26: stiffness. London: British Standards Institution.
   Google Scholar
• Fang, X., et al., 2014. Impact of rapid-hardening cements on mechanical properties of cement bitumen emulsion asphalt. Materials and Structures, 1–12.
   Google Scholar
• García, A., et al., 2013. Influence of cement content and environmental humidity on asphalt emulsion and cement composites performance. Materials and Structures, 46 (8), 1275–1289.10.1617/s11527-012-9971-6
   Web of Science ®Google Scholar
• Gómez-Meijide, B. and Pérez, I., 2014. Effects of the use of construction and demolition waste aggregates in cold asphalt mixtures. Construction and Building Materials, 51, 267–277.10.1016/j.conbuildmat.2013.10.096
   Web of Science ®Google Scholar
• Grilli, A., Graziani, A., and Bocci, M., 2012. Compactability and thermal sensitivity of cement–bitumen-treated materials. Road Materials and Pavement Design, 13 (4), 599–617.10.1080/14680629.2012.742624
   Web of Science ®Google Scholar
• Head, R.W., 1974. An informal report of cold mix research using emulsified asphalt as a binder. Association of Asphalt Paving Technologists, 43, 110–131.
   Google Scholar
• Humphreys, K. and Mahasenan, M., 2002. Toward a sustainable cement industry. Substudy 8: climate change. Geneva, World business council for sustainable development. [ online]. http://www.wbcsdcement.org/ [Accessed  01/06/2015].
   Google Scholar
• Khalid, H.A. and Monney, O.K., 2009. Moisture damage potential of cold asphalt. International Journal of Pavement Engineering, 10 (5), 311–318.10.1080/10298430802169838
   Web of Science ®Google Scholar
• Li, G., et al., 1998. Experimental study of cement-asphalt emulsion composite. Cement and Concrete Research, 28 (5), 635–641.10.1016/S0008-8846(98)00038-6
   Web of Science ®Google Scholar
• Liebenberg, J. and Visser, A., 2004. Towards a mechanistic structural design procedure for emulsion-treated base layers: technical paper. Journal of the South African Institution of Civil Engineering, 46 (3), 2–9.
   Google Scholar
• Lothenbach, B., et al., 2008. Thermodynamic modelling of the effect of temperature on the hydration and porosity of Portland cement. Cement and Concrete Research, 38 (1), 1–18.10.1016/j.cemconres.2007.08.017
   Web of Science ®Google Scholar
• Lu, C.-T., Kuo, M.-F., and Shen, D.-H., 2009. Composition and reaction mechanism of cement–asphalt mastic. Construction and Building Materials, 23 (7), 2580–2585.10.1016/j.conbuildmat.2009.02.014
   Web of Science ®Google Scholar
• Megat Johari, M.A., et al., 2011. Influence of supplementary cementitious materials on engineering properties of high strength concrete. Construction and Building Materials, 25 (5), 2639–2648.10.1016/j.conbuildmat.2010.12.013
   Web of Science ®Google Scholar
• Miljković, M. and Radenberg, M., 2014. Fracture behaviour of bitumen emulsion mortar mixtures. Construction and Building Materials, 62, 126–134.10.1016/j.conbuildmat.2014.03.034
   Web of Science ®Google Scholar
• Miljković, M. and Radenberg, M., 2016. Effect of compaction energy on physical and mechanical performance of bitumen emulsion mortar. Materials and Structures, 49 (1–2), 193–205.10.1617/s11527-014-0488-z
   Web of Science ®Google Scholar
• Modarres, A. and Ayar, P., 2014. Comparing the mechanical properties of cold recycled mixture containing coal waste additive and ordinary portland cement. International Journal of Pavement Engineering, 17 (3), 211–224.
   Web of Science ®Google Scholar
• Mohammed, M.K., Dawson, A.R., and Thom, N.H., 2013. Production, microstructure and hydration of sustainable self-compacting concrete with different types of filler. Construction and Building Materials, 49, 84–92.10.1016/j.conbuildmat.2013.07.107
   Web of Science ®Google Scholar
• Nassar, A.I., Thom, N., and Parry, T., 2016. Optimizing the mix design of cold bitumen emulsion mixtures using response surface methodology. Construction and Building Materials, 104, 216–229.10.1016/j.conbuildmat.2015.12.073
   Web of Science ®Google Scholar
• Needham, D., 1996. Developments in bitumen emulsion mixtures for roads. Thesis (PhD). University of Nottingham.
   Google Scholar
• Niazi, Y. and Jalili, M., 2009. Effect of Portland cement and lime additives on properties of cold in-place recycled mixtures with asphalt emulsion. Construction and Building Materials, 23 (3), 1338–1343.10.1016/j.conbuildmat.2008.07.020
   Web of Science ®Google Scholar
• Nikolaides, A., 1994. A new design method for dense cold mixtures. In: Proceedings of the first European symposium on performance and durability of bituminous materials, University of Leeds, UK, 259.
   Google Scholar
• Ojum, C., et al., 2014. An investigation into the effects of accelerated curing on cold recycled bituminous mixesed. In: International conference on asphalt pavements, ISAP, Raleigh, NC, USA, 1177–1188.
   Google Scholar
• Oke, O.L., 2011. A study on the development of guidelines for the production of bitumen emulsion stabilised raps for roads in the tropics. Thesis (PhD). University of Nottingham.
   Google Scholar
• Oner, A. and Akyuz, S., 2007. An experimental study on optimum usage of GGBS for the compressive strength of concrete. Cement and Concrete Composites, 29 (6), 505–514.10.1016/j.cemconcomp.2007.01.001
   Web of Science ®Google Scholar
• Oruc, S., Celik, F., and Akpinar, M.V., 2007. Effect of cement on emulsified asphalt mixtures. Journal of Materials Engineering and Performance, 16 (5), 578–583.10.1007/s11665-007-9095-2
   Web of Science ®Google Scholar
• Pasetto, M. and Baldo, N., 2010. Experimental evaluation of high performance base course and road base asphalt concrete with electric arc furnace steel slags. Journal of Hazardous Materials, 181 (1), 938–948.10.1016/j.jhazmat.2010.05.104
   PubMed Web of Science ®Google Scholar
• Pasetto, M. and Baldo, N., 2012. Laboratory investigation on foamed bitumen bound mixtures made with steel slag, foundry sand, bottom ash and reclaimed asphalt pavement. Road Materials and Pavement Design, 13 (4), 691–712.10.1080/14680629.2012.742629
   Web of Science ®Google Scholar
• Pettinari, M., et al., 2014. The effect of cryogenic crumb rubber in cold recycled mixes for road pavements. Construction and Building Materials, 63, 249–256.10.1016/j.conbuildmat.2014.04.060
   Web of Science ®Google Scholar
• Schmidt, R., Santucci, L., and Coyne, L., 1973. Performance characteristics of cement-modified asphalt emulsion mixes. Association of Asphalt Paving Technologists, 42, 300–319.
   Google Scholar
• Serfass, J.-P., et al., 2004. Influence of curing on cold mix mechanical performance. Materials and Structures, 37 (5), 365–368.10.1617/14130
   Google Scholar
• Terrell, R. and Wang, C., 1971. Early curing behavior of cement modified asphalt emulsion mixtures. Association of Asphalt Paving Technologists, 40, 108–125.
   Google Scholar
• Thanaya, I.N.A., 2003. Improving the performance of cold bituminous emulsion mixtures (cbems): incorporating waste. Thesis (PhD). University of Leeds.
   Google Scholar
• Thanaya, I.N.A., Zoorob, S., and Forth, J., 2009. A laboratory study on cold-mix, cold-lay emulsion mixtures. Proceedings of the ICE-Transport, 162 (1), 47–55.10.1680/tran.2009.162.1.47
   Google Scholar
• Thom, N., 2008. Principles of pavement engineering. London: Thomas Telford Publishing.10.1680/pope.34808
   Google Scholar
• Wang, Z. and Sha, A., 2010. Micro hardness of interface between cement asphalt emulsion mastics and aggregates. Materials and Structures, 43 (4), 453–461.10.1617/s11527-009-9502-2
   Web of Science ®Google Scholar
• Wang, F., Liu, Y., and Hu, S., 2013. Effect of early cement hydration on the chemical stability of asphalt emulsion. Construction and Building Materials, 42, 146–151.10.1016/j.conbuildmat.2013.01.009
   Web of Science ®Google Scholar