References
- Al-Qadi, I. and Wang, H., 2009. Evaluation of pavement damage due to new tire designs, FHWA-ICT-09-048. Urbana, IL: Illinois Center for Transportation, Department of Civil and Environmental Engineering, University of Illinois at Urbana-Champaign.
- De Beer, M., Fisher, C., and Sadzik, E., 2008. Towards quantifying horizontal stresses of free-polling pneumatic rubber tyres on road surfaces. Partnership for research and progress in Transportation, 27th Southern African Transport Conference (SATC), 7–11 July 2008 Pretoria, South Africa, pp. 16.
- Luo, R. and Prozzi, J., 2007. Effect of measured three-dimensional tire – Pavement contact stress on pavement response at asphalt surface. Transportation Research Record: Journal of the Transportation Research Board, 2037 (1), 115–127.
- Machemehl, R., Wang, F. and Prozzi, J., 2005. Analytical study of effects of truck tire pressure on pavements with measured tire-pavement contact stress data. Transportation Research Record: Journal of the Transportation Research Board, 1919 (1), 111–119.
- Marsili, R., 2000. Measurement of the dynamic normal pressure between tire and ground using PVDF piezoelectric films. IEEE Transactions on Instrumentation and Measurement, 49, 736–740.10.1109/TIM.2000.863916
- Moazami, D., 2014. Determination of Relative Damage of Asphalt Mixtures from Reduced Tire Contact Area. Thesis (PhD). Civil Engineering. Universiti Putra Malaysia.
- Moazami, D., et al., 2011. Effect of tire footprint area in pavement response studies. International Journal of the Physical Sciences, 6, 5040–5047.
- Muniandy, R., et al., 2013. Ability of rotary compactor in compacting consistent slabs and effect of rotary compaction on engineering properties of stone mastic asphalt mixtures. Journal of Central South University, 20, 3754–3763.10.1007/s11771-013-1904-1
- Muniandy, R., et al., 2014. Characterization of Effective tire contact area for various tread patterns. Instrumentation Science & Technology, 42, 15–26.
- National Asphalt Pavement Association (NAPA), 1999. Designing and Constructing SMA Mixtures – State-of-the-Practice, Quality Improvement Series 122. Lanham, Maryland: National Asphalt Pavement Association.
- Novak, M., Birgisson, B., and Roque, R., 2003. Near-surface stress states in flexible pavements using measured radial tire contact stresses and ADINA. Computers & Structures, 81, 859–870.
- Park, D., 2008. Prediction of pavement fatigue and rutting life using different tire types. KSCE Journal of Civil Engineering, 12, 297–303.
- Park, D., et al, 2008. Effects of tire inflation pressure and load on predicted pavement strains. The Baltic Journal of Road and Bridge Engineering, 3 (4), 181–186.10.1007/s12205-008-0297-4
- Sadeghi, J. and Fathali, M., 2007. Deterioration analysis of flexible pavements under overweight vehicles. Journal of Transportation Engineering, 133, 625–633.10.1061/(ASCE)0733-947X(2007)133:11(625)
- Timm, D., et al., 2001. Calcool: A multi-layer asphalt pavement cooling tool for temperature prediction during construction. International Journal of Pavement Engineering, 2, 169–185.10.1080/10298430108901725