637
Views
37
CrossRef citations to date
0
Altmetric
Original Articles

Evaluation of asphalt–aggregate interaction based on the rheological properties

, , , , &
Pages 586-592 | Received 12 Oct 2015, Accepted 24 May 2016, Published online: 22 Jun 2016

References

  • Bhasin, A., 2006. Development of methods to quantify bitumen-aggregate adhesion and loss of adhesion due to water. College Station, TX: Texas A&M University.
  • Chen, G.M. and Tan, Y.Q., 2007. Asphalt mixture performance research based on coarse aggregate surface texture. Journal of Highway and Transportation Research and Development, 24 (2), 8–12.
  • Craus, J., Ishai, I. and Sides, A., 1978. Some physico-chemical aspects of the effect and the role of the filler in bituminous paving mixtures. Journal of the Association of Asphalt Paving Technologists, 47, 558–588.
  • Curtis, G.W., 1993. Investigation of asphalt–aggregate interactions in asphalt pavements. Abstracts of Papers of the American Chemical Society, 204 (34), 1292–1298.
  • Ensley, E.K., 1973. A study of asphalt aggregate interactions and asphalt molecular interactions by microcalorimetric methods: postulated interaction mechanism. Journal of the Institute of Petroleum, 59, 279–289.
  • Ensley, E.K. and Seholz, H.A., 1972. A study of asphalt–aggregate interactions by heat of immersion. Journal of the Institute of Petroleum, 58, 95–101.
  • Feng, D.C., et al., 1995. Study of test method evaluation the adhesion capacity of asphalt with aggregate. Journal of Harbin University of Civil Engineering and Architecture, 28 (2), 50–54.
  • Hashimoto, M., et al., 2011. Effect of mineral filler characteristics on asphalt mastic and mixture rutting potential. Transportation Research Record: Journal of the Transportation Research Board, 2208, 33–39.10.3141/2208-05
  • Huang, S.C. and Robertson, R.E., 2006. Rheology of thin asphalt films in contact with aggregate. Road Materials and Pavement Design, 7 (2), 179–199.10.1080/14680629.2006.9690032
  • Kerner, E.H., 1956. The elastic and thermo-elastic properties of composite media. Proceedings of the Physical Society. Section B, 69 (8), 808–813.10.1088/0370-1301/69/8/305
  • Kim, Y.R., Little, D.N. and Song, I., 2003. Effect of mineral fillers on fatigue resistance and fundamental material characteristics: mechanistic evaluation. Transportation Research Record: Journal of the Transportation Research Board, 1832, 1–8.10.3141/1832-01
  • Kubát, J., Rigdahl, M. and Welander, M., 1990. Characterization of interfacial interactions in high density polyethylene filled with glass spheres using dynamic mechanical analysis. Journal of Applied Polymer Science, 39, 1527–1539.10.1002/app.1990.070390711
  • Lesueur, D. and Little, D.N., 1998. Effect of hydrated lime on rheology, fracture, and aging of bitumen. Transportation Research Record, 1661, 93–105.
  • Lewis, T.B. and Nielsen, L.E., 1968. Viscosity of dispersed and aggregated suspensions of spheres. Journal of Rheology, 12, 421–443.10.1122/1.549114
  • Lewis, T.B. and Nielsen, L.E., 1970. Dynamic mechanical properties of particulate-filled composites. Journal of Applied Polymer Science, 14, 1449–1471.10.1002/app.1970.070140604
  • Liu, Y. and You, Z., 2011. Discrete-element modeling: impacts of aggregate sphericity, orientation, and angularity on creep stiffness of idealized asphalt mixtures. Journal of Materials in Civil Engineering, 137, 294–303.
  • Ministry of Transport of the People’s Republic of China, 2004. Technical Specification for Construction of Highway Asphalt Pavement JTG F40–2004. Beijing: China Communication Press.
  • Nielsen, L.E., 1970. Generalized equation for the elastic moduli of composite materials. Journal of Applied Physics, 41, 4626–4627.10.1063/1.1658506
  • Ozkahraman, H.T. and Işık, E.C., 2005. The effect of chemical and mineralogical composition of aggregates on tensile adhesion strength of tiles. Construction and Building Materials, 19 (4), 251–255.10.1016/j.conbuildmat.2004.07.016
  • Tan, Y.Q., Li, X.L. and Zhou, X.Y., 2010. Interactions of granite and asphalt based on the rheological characteristics. Journal of Materials in Civil Engineering, 22 (8), 820–825.
  • Tan, Y.Q., Li, X.L. and Wu, J.T., 2012. Internal influence factors of asphalt-aggregate filler interactions based on rheological characteristics. Journal of Materials in Civil Engineering, 24 (12), 1520–1528.
  • Xiao, Q.C., Qian, C.X. and Xie, J.G., 2004. Experimental research on modification of asphalt concrete performance and asphalt-aggregate interface by coupling agent. Journal of Southeast University (Natural Science Edition), 34 (4), 485–489.
  • Yan, X.L. and Liang, C.Y., 2001. Study of the shear adhesiveness between bitumen and rock. China Journal of Highway and Transport, 14 (4), 25–27.
  • You, Z. and Dai, Q., 2007a. Review of advances in micromechanical modeling of aggregate–aggregate interactions in asphalt mixtures. Canadian Journal of Civil Engineering, 34 (2), 239–252.10.1139/l06-113
  • You, Z. and Dai, Q., 2007b. Dynamic complex modulus predictions of hot-mix asphalt using a micromechanical-based finite element model. Canadian Journal of Civil Engineering, 34 (12), 1519–1528.10.1139/L07-064
  • Zhang, J.P., Xu, L. and Pei, J.Z., 2011. Viscoelastic analysis of asphalt mastic based on micromechanics. Advanced Materials Research, 266, 38–41.10.4028/www.scientific.net/AMR.266
  • Zhang, J.P., Pei, J.Z. and Li, Y.W., 2013. Research on interaction between asphalt and filler based on DSR test. Advanced Materials Research, 723, 480–487.10.4028/www.scientific.net/AMR.723
  • Ziegel, K.D. and Romanov, A., 1973. Modulus reinforcement in elastomer composites. I. Inorganic fillers. Journal of Applied Polymer Science, 17, 1119–1131.10.1002/app.1973.070170410

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.