411
Views
28
CrossRef citations to date
0
Altmetric
Original Articles

Performance evaluation of rubberised asphalt mixes containing WMA additives

, &
Pages 623-629 | Received 05 Jan 2016, Accepted 04 May 2016, Published online: 28 Jun 2016

References

  • Akisetty, C.K., Lee, S.-J., and Amirkhanian, S.N., 2009. High temperature properties of rubberized binders containing warm asphalt additives. Construction and Building Materials, 23 (1), 565–573.10.1016/j.conbuildmat.2007.10.010
  • Al-Hadidy, A.I. and Tan, Y.Q., 2009. Mechanistic analysis of ST and SBS-modified flexible pavements. Construction and Building Materials, 23 (8), 2941–2950.10.1016/j.conbuildmat.2009.02.023
  • American Association of State Highway, & Transportation Officials, 1993. AASHTO Guide for design of pavement structures, (Vol. 1). Washington, DC: AASHTO.
  • Code, I.H.A.P. 2003. Min-istry of Road and Transportation Research and Education Center, Publication No. 234, Tehran, Iran.
  • Curtis, C., Lytton, R., and Brannan, C., 1992. Influence of aggregate chemistry on the adsorption and desorption of asphalt. Transportation Research Record, 1362, 1–9.
  • D’Angelo, J. A., et al., 2008. Warm-mix asphalt: European practice. (No. FHWA-PL-08-007). Washington, DC: Federal Highway Administration.
  • Hurley, G.C. and Prowell, B.D., 2006. Evaluation of potential processes for use in warm mix asphalt. Journal of the Association of Asphalt Paving Technologists, 75, 41–90.
  • Imaninasab, R., Bakhshi, B., and Shirini, B., 2016. Rutting performance of rubberized porous asphalt using Finite Element Method (FEM). Construction and Building Materials, 106, 382–391.10.1016/j.conbuildmat.2015.12.134
  • Isacsson, U. and Lu, X., 1995. Testing and appraisal of polymer modified road bitumens – state of the art. Materials and Structures, 28 (3), 139–159.10.1007/BF02473221
  • Kaloush, K.E. and Witczak, M.W., 2002. Tertiary flow characteristics of asphalt mixtures (with discussion and closure). Journal of the Association of Asphalt Paving Technologists, 71, 248–280.
  • Kavussi, A. and Hashemian, L., 2011. Properties of WMA–foam mixes based on major mechanical tests. Journal of Civil Engineering and Management, 17 (2), 207–216.10.3846/13923730.2011.576825
  • Lottman, R.P. 1982. Laboratory test methods for predicting moisture-induced damage to asphalt concrete. Transportation Research Record, 843, 88–95.
  • Moghadas Nejad, F., et al., 2012. Influence of using nonmaterial to reduce the moisture susceptibility of hot mix asphalt. Construction and Building Materials, 31, 384–388.10.1016/j.conbuildmat.2012.01.004
  • Oliveira, J.R., et al., 2013. Use of a warm mix asphalt additive to reduce the production temperatures and to improve the performance of asphalt rubber mixtures. Journal of Cleaner Production, 41, 15–22.10.1016/j.jclepro.2012.09.047
  • Palit, S.K., Reddy, K.S., and Pandey, B.B., 2004. Laboratory evaluation of crumb rubber modified asphalt mixes. Journal of Materials in Civil Engineering, 16 (1), 45–53.10.1061/(ASCE)0899-1561(2004)16:1(45)
  • Prowell, B., 2007. Warm mix asphalt, the international technology scanning program summary report. Stafford, VA: American Trade Initiatives.
  • Prowell, B.D., Hurley, G.C., and Frank, B., 2007. Warm-mix asphalt: best practices. Lanham, MD: National Asphalt Pavement Association.
  • Rahman, M., Airey, G., and Collop, A., 2010. Moisture susceptibility of high and low compaction dry process crumb rubber-modified asphalt mixtures. Transportation Research Record: Journal of the Transportation Research Board, 2180, 121–129.10.3141/2180-14
  • Ramzanpour, N. and Mokhtari, A., 2011. Laboratory evaluation of SMA mixtures containing different additives. Journal of Applied Sciences, 11, 3677–3687.
  • Rohith, N. and Ranjitha, J., 2013. A study on marshall stability properties of warm mix asphalt using zycotherm a chemical additive. International Journal of Engineering Research & Technology, 2 (7), 808–813.
  • Samadian, F. 2006. Tire recycling report. Ministry of Minning and industries, Tehran, Iran (in Persian).
  • Shirini, B. and Imaninasab, R., 2016. Performance evaluation of rubberized and SBS modified porous asphalt mixtures. Construction and Building Materials, 107, 165–171.10.1016/j.conbuildmat.2016.01.006
  • Silva, H.M.R.D.d., et al., 2010. Assessment of the performance of warm mix asphalts in road pavements. International Journal of Pavement Research and Technology, 3 (3), 119–127.
  • Singh, S., et al., 2009. Waste tyre rubber as a secondary fuel for power plants. Fuel, 88 (12), 2473–2480.10.1016/j.fuel.2009.02.026
  • Stuart, K.D. and Mogawer, W.S., 1997. Validation of asphalt binder and mixture tests that predict rutting susceptibility using the fhwa alf (with discussion). Journal of the Association of Asphalt Paving Technologists, 66, 109–152.
  • Takallou, H.B. and Sainton, A., 1992. Advances in technology of asphalt paving materials containing used tire rubber. Transportation Research Record, 1339, 23–29.
  • Wang, H., et al., 2012. Effect of warm mixture asphalt (WMA) additives on high failure temperature properties for crumb rubber modified (CRM) binders. Construction and Building Materials, 35, 281–288.10.1016/j.conbuildmat.2012.04.004
  • Wang, H., et al., 2012. Laboratory evaluation on high temperature viscosity and low temperature stiffness of asphalt binder with high percent scrap tire rubber. Construction and Building Materials, 26 (1), 583–590.10.1016/j.conbuildmat.2011.06.061
  • Xiao, F. and Amirkhanian, S.N., 2008. Resilient modulus behavior of rubberized asphalt concrete mixtures containing reclaimed asphalt pavement. Road Materials and Pavement Design, 9 (4), 633–649.10.1080/14680629.2008.9690142
  • Xiao, F. and Amirkhanian, S.N., 2009. Laboratory investigation of moisture damage in rubberised asphalt mixtures containing reclaimed asphalt pavement. International Journal of Pavement Engineering, 10 (5), 319–328.10.1080/10298430802169432
  • Xiao, F. and Amirkhanian, S.N., 2010. Laboratory investigation of utilizing high percentage of RAP in rubberized asphalt mixture. Materials and Structures, 43 (1–2), 223–233.10.1617/s11527-009-9483-1
  • Xiao, F., Putman, B.J., and Amirkhanian, S.N., 2006. Laboratory investigation of dimensional changes of crumb rubber reacting with asphalt binder. In: Paper presented at the proceeding asphalt rubber 2006 conference, 25 October 2006. California: Palms Spring, 693–715.
  • Xiao, F., Amirkhanian, S., and Juang, C.H., 2007. Rutting resistance of rubberized asphalt concrete pavements containing reclaimed asphalt pavement mixtures. Journal of Materials in Civil Engineering, 19 (6), 475–483.10.1061/(ASCE)0899-1561(2007)19:6(475)
  • Xiao, F., Wenbin Zhao, P., and Amirkhanian, S.N., 2009. Fatigue behavior of rubberized asphalt concrete mixtures containing warm asphalt additives. Construction and Building Materials, 23 (10), 3144–3151.10.1016/j.conbuildmat.2009.06.036
  • Xiao, F., et al., 2010. Influence of antistripping additives on moisture susceptibility of warm mix asphalt mixtures. Journal of Materials in Civil Engineering, 22 (10), 1047–1055.10.1061/(ASCE)MT.1943-5533.0000111

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.