Evaluation of rutting potential for asphalt concrete mixes containing copper slag

References

• AASHTO, 1993. AASHTO guide for design of pavement structures. Washington, DC: American Association of State Highway and Transportation Officials.
   Google Scholar
• AASHTO, 2015. Mechanistic-empirical pavement design guide, a manual of practice. 2nd ed. Washington, DC: American Association of State Highway and Transportation Officials.
   Google Scholar
• Ahmedzade, P. and Sengoz, B., 2009. Evaluation of steel slag coarse aggregate in hot mix asphalt concrete. Journal of Hazardous Materials, 165, 300–305.10.1016/j.jhazmat.2008.09.105
   PubMed Web of Science ®Google Scholar
• Al-Qadi, I., et al., 2008. Dynamic analysis and in situ validation of perpetual pavement response to vehicular loading. Transportation Research Record: Journal of the Transportation Research Board, 2087, 29–39.10.3141/2087-04
   Web of Science ®Google Scholar
• Al-Qadi, I. and Elseifi, M.A., 2008. Frequency determination from vehicular loading time pulse to predict appropriate complex modulus in MEPDG. Journal Association of Asphalt Paving Technologists, 77, 739–772.
   Google Scholar
• Applied Research Associates (ARA), Inc., 2004. Guide for mechanistic-empirical design of new and rehabilitated pavement structures. In: Final Document Appendix RR: Finite Element Procedures for Flexible Pavement Analysis. Champaign, IL: ARA, ERES Division.
   Google Scholar
• Bonaquist, R., 2013. Evaluation of flow number (Fn) as a discriminating HMA mixture property. SPR# 0092-09-01. WI: Wisconsin Highway Reproach Program. Available from: http://wisdotresearch.wi.gov/wp-content/uploads/WisDOT-WHRP-project-0092-09-01-final-report.pdf [Accessed 9 January 2016].
   Google Scholar
• Directorate General of Roads and Land Transport (DGRLT), 2010. Highway design specifications. Muscat: Ministry of Transport and Communications, Sultanate of Oman.
   Google Scholar
• EverStressFE, 2009. Computer software for 3-D finite analysis of flexible pavement structures version 1.0. Orono, ME: University of Maine.
   Google Scholar
• Federal Highway Administration (FHWA), 2012. User guidelines for waste and by-product materials in pavement construction. Available from: https://www.fhwa.dot.gov/publications/research/infrastructure/structures/97148/intro.cfm [Accessed 10 December 2015].
   Google Scholar
• Federal Highway Administration (FHWA), 2013. Asphalt mixture performance tester (AMPT), TechBrief FHWA-HIF-13-005. Available from: http://www.fhwa.dot.gov/pavement/asphalt/pubs/hif13005.pdf [Accessed 11 July 2015].
   Google Scholar
• Gorai, B., Jana, R.K., and Premchand, 2003. Characteristics and utilisation of copper slag – a review. Resources, Conservation and Recycling, 39, 299–313.10.1016/S0921-3449(02)00171-4
   Web of Science ®Google Scholar
• Huang, Y., Bird, R.N., and Heidrich, O., 2007. A review of the use of recycled solid waste materials in asphalt pavements. Resources, Conservation and Recycling, 52, 58–73.10.1016/j.resconrec.2007.02.002
   Web of Science ®Google Scholar
• LTPP Bind, 2005. LTTPBind version 3.1. MD: Pavement Systems LLC.  Available from: http://www.pavesys.net/services/
   Google Scholar
• Mohseni, A. and Carpenter, S., 2005. Development of SUPERPAVE high-temperature performance grade (PG) based on rutting damage (with discussion and closure). Journal Association of Asphalt Paving Technologists, 74, 197–254.
   Google Scholar
• NCHRP, 2004. Guide for mechanistic-empirical design of new and rehabilitated pavement structures. Washington, DC: Transportation Research Board, National Cooperative Highway Research Program, NCHRP 1-37A Final Report.
   Google Scholar
• NCHRP, 2011. A manual for design of hot mix asphalt with commentary. Washington, DC: Transportation Research Board, National Cooperative Highway Research Program, NCHRP Report 673.
   Google Scholar
• Recycled Materials Resource Centre (RMRC), 2012. User guidelines for by-products and secondary use of materials in pavement construction. Available from: http://rmrc.wisc.edu/ug-mat-nonferrous-slags/ [Accessed 23 August 2015].
   Google Scholar
• Rodenzo, M.C., 2010. Rutting criteria for asphalt mixtures based on flow number analysis. Thesis (PhD). Arizona State University.
   Google Scholar
• Shahu, J.T., Patel, S., and Senapati, A., 2013. Engineering properties of copper slag–fly ash–dolime mix and its utilization in the base course of flexible pavements. Journal of Materials in Civil Engineering, 25 (12), 1871–1879.10.1061/(ASCE)MT.1943-5533.0000756
   Web of Science ®Google Scholar
• SigmaPlot, 2006. SigmaPlot Version 10.0 user’s guide. Chicago, IL: Systat Software.
   Google Scholar
• AASHTO Designation: TP62, 2004. Standard method of test for determining dynamic modulus of hot mix asphalt concrete mixtures. AASHTO Standards, 2004th ed. Washington, DC: AASHTO.
   Google Scholar
• AASHTO Designation: T312, 2004. Standard method of test for preparing and determining the density of hot-mix asphalt (HMA) specimens by means of the Superpave gyratory compactor. AASHTO Standards, 2004th ed. Washington, DC: AASHTO.
   Google Scholar
• AASHTO Designation: T245, 2004. Standard method of test for resistance to plastic flow of bituminous mixtures using Marshall Apparatus. AASHTO Standards, 2004th ed. Washington, DC: AASHTO.
   Google Scholar
• AASHTO Designation: R30, 2004. Standard practice for mixture conditioning of hot-mix asphalt (HMA). AASHTO Standards, 2004th ed. Washington, DC: AASHTO.
   Google Scholar
• AASHTO Designation: TP79, 2014. Standard method of test for determining dynamic modulus and flow number for asphalt mixtures using the asphalt mixture performance Tester (AMPT). AASHTO Standards, 2014th ed. Washington, DC: AASHTO.
   Google Scholar