Micromechanical modelling of bituminous materials’ complex modulus at different length scales

References

• Aigner, E., Lackner, R., and Picher, C., 2009. Multiscale prediction of viscoelastic properties of asphalt concrete. Journal of Materials in Civil Engineering, 21, 771–780.10.1061/(ASCE)0899-1561(2009)21:12(771)
   Web of Science ®Google Scholar
• Aigner, E., Lackner, R., and Eberhardsteiner, J., 2012. Multiscale viscoelastic−viscoplastic model for the prediction of permanent deformation in flexible pavements. International Journal for Multiscale Computational Engineering, 10, 615–634.10.1615/IntJMultCompEng.v10.i6
   Web of Science ®Google Scholar
• Alberola, N.D. and Mele, P., 1996. Viscoelasticity of polymers filled by rigid or soft particles: Theory and experiment. Polymer Composites, 17, 751–759.10.1002/(ISSN)1548-0569
   Web of Science ®Google Scholar
• Bandyopadhyaya, R., Das, A., and Basu, S., 2008. Numerical simulation of mechanical behavior of asphalt mix. Construction and Building Materials, 22, 1051–1058.10.1016/j.conbuildmat.2007.03.010
   Web of Science ®Google Scholar
• Boutin, C., et al., 1995. De la rhéologie du liant à celle de l’enrobé bitumineux, Théorie de l’homogénisation et validation expérimentale [From binder rheology to asphalt mixes, Homogenization theory and experimental validation]. In: Eurobitume Workshop. Brussels.
   Google Scholar
• Choi, J.-H., Adams, T.M., and Bahia, H.U., 2004. Pavement roughness modeling using back propagation neural networks. Computer-Aided Civil and Infrastructure Engineering, 19, 295–303.10.1111/mice.2004.19.issue-4
   Web of Science ®Google Scholar
• Christensen, R.M. and Lo, K.H., 1979. Solutions for effective shear properties of three phase sphere and cylinder models. Journal of the Mechanics and Physics of Solids, 27, 315–330.10.1016/0022-5096(79)90032-2
   Web of Science ®Google Scholar
• Christensen, R.M. and Lo, K.H., 1986. Erratum: solution for effective shear properties of three phase sphere and cylinder models. Journal of the Mechanics and Physics of Solids, 34, 639–639.
   Web of Science ®Google Scholar
• Coenen, A.R., et al., 2012. Aggregate structure characterisation of asphalt mixtures using two-dimensional image analysis. Road Materials and Pavement Design, 13, 433–454.10.1080/14680629.2012.711923
   Web of Science ®Google Scholar
• Delaporte, B., et al., 2005. Linear viscoelastic properties of mastics: results from a new annular shearing rheometer, and modeling. In: International conference on bearing capacity of roads railways and airfields. Trondheim, Norway.
   Google Scholar
• Di Benedetto, H. and Des Croix, P., 1996. Binder-mix rheology: limits of linear domain, non linear behaviour. In: Eurasphalt & Eurobitume. Strasbourg, France.
   Google Scholar
• Di Benedetto, H., et al., 2004. Linear viscoelastic behavior of bituminous materials: from binders to mixes. Road Materials and Pavement Design, 5, 163–202.10.1080/14680629.2004.9689992
   Google Scholar
• Fakhari Tehrani, F., et al., 2013a. Heterogeneous numerical modeling of asphalt concrete through use of a biphasic approach: porous matrix/inclusions. Computational Materials Science, 69, 186–196.10.1016/j.commatsci.2012.11.041
   Web of Science ®Google Scholar
• Fakhari Tehrani, F., et al., 2013b. Investigation into the impact of the use of 2D/3D digital models on the numerical calculation of the bituminous composites’ complex modulus. Computational Materials Science, 79, 377–389.10.1016/j.commatsci.2013.05.054
   Web of Science ®Google Scholar
• Ferry, J.D., 1980. Viscoelastic properties of polymers. New York: John Wiley & Sons.
   Google Scholar
• Füssi, J. and Lackner, R., 2011. Multiscale fatigue model for bituminous mixtures.2011. International Journal of Fatigue, 33, 1435–1450.
   Web of Science ®Google Scholar
• Herve, E. and Zaoui, A., 1993. n-layered inclusion-based micromechanical modeling. International Journal of Engineering Science, 31, 1–10.
   Web of Science ®Google Scholar
• Ioannides, A.M. and Krovesis, G.T., 1990. Aggregate interlock: a pure shear load transfer mechanism. Transportation Research Board, 1286, 14–24.
   Google Scholar
• Jefferson, A.D., 2002. Constitutive modelling of aggregate interlock in concrete. International Journal for Numerical and Analytical Methods in Geomechanics, 26, 515–535.10.1002/(ISSN)1096-9853
   Web of Science ®Google Scholar
• Jensen, E.A. and Hansen, W., 2006. Nonlinear aggregate interlock model for concrete pavements. International Journal of Pavement Engineering, 7, 261–273.10.1080/10298430600798911
   Google Scholar
• Kim, H. and Buttlar, W.G., 2009. Multi-scale fracture modeling of asphalt composite structures. Composites Science and Technology, 69, 2716–2723.10.1016/j.compscitech.2009.08.014
   Web of Science ®Google Scholar
• Kim, Y.R., Souza, F.V., and Park, T., 2013a. Multi-scale modeling of the damage evolution in viscoelastic bituminous mixtures subjected to cyclic loading cyclic loading. Journal of Engineering Materials and Technology, Transactions of the ASME, 135, 23–32.
   Web of Science ®Google Scholar
• Kim, Y.R., Souza, F.V., and Lutif, J.E.S., 2013b. A two-way coupled multiscale model for predicting damage-associated performance of asphaltic roadways. Computational Mechanics, 51, 187–201.10.1007/s00466-012-0716-8
   Web of Science ®Google Scholar
• Lutif, J.E.S., et al., 2010. Multiscale modeling to predict the mechanical behavior of asphalt mixtures. Journal of the Transportation Research Board, 2181, 28–35.10.3141/2181-04
   Web of Science ®Google Scholar
• Mitra, S.R., Reddy, K.S., and Ramachandra, L.S., 2010. Load transfer characteristics of aggregate interlocking in concrete pavement. Journal of Transportation Engineering, 136, 190–195.10.1061/(ASCE)TE.1943-5436.114
   Web of Science ®Google Scholar
• Mo, L.T., et al., 2007. Investigation into stress states in porous asphalt concrete on the basis of FE-modelling. Finite Elements in Analysis and Design, 43, 333–343.10.1016/j.finel.2006.11.004
   Web of Science ®Google Scholar
• Mo, L.T., et al., 2008. 2D and 3D meso-scale finite element models for raveling analysis of porous asphalt concrete. Journal of Finite Elements in Analysis Design, 44, 186–196.10.1016/j.finel.2007.11.012
   Web of Science ®Google Scholar
• Olard, F., et al., 2005. Properties of bituminous mixtures at low temperatures and relations with binder characteristics. Materials and Structures, 38, 121–126.10.1007/BF02480584
   Web of Science ®Google Scholar
• Pichler, Ch, Lackner, R., and Aigner, E., 2012. Generalized self-consistent scheme for upscaling of viscoelastic properties of highly-filled matrix-inclusion composites – application in the context of multiscale modeling of bituminous mixtures. Composites Part B: Engineering, 43, 457–464.10.1016/j.compositesb.2011.05.034
   Web of Science ®Google Scholar
• Sayegh, G., 1967. Viscoelastic properties of bituminous mixtures. Proceedings of the 2nd international conference on Structural Design of Asphalt Pavemen. Ann Arbor: held. Rackham Lecture Hall: University of Michigan, 743–755.
   Google Scholar
• Yin, A., et al., 2011. Multiscale fracture simulation of three-point bending asphalt mixture beam considering material heterogeneity. Engineering Fracture Mechanics, 78, 2414–2428.10.1016/j.engfracmech.2011.06.001
   Web of Science ®Google Scholar
• Zaman, M. and Alvappillai, A., 1995. Contact element mode for dynamic analysis of jointed concrete Pavements. Journal of Transportation Engineering, 121, 425–433.10.1061/(ASCE)0733-947X(1995)121:5(425)
   Web of Science ®Google Scholar