Adhesive properties of asphalts and aggregates in tropical climates

References

• Aguiar-Moya, J., et al., 2015. Effect of aging on adhesion properties of asphalt mixtures with the use of bitumen bond strength and surface energy measurement tests. Transportation Research Record: Journal of the Transportation Research Board, 2505, 57–65.10.3141/2505-08
   Web of Science ®Google Scholar
• Airey, G.D., et al., 2008. The influence of aggregate, filler and bitumen on asphalt mixture moisture damage. Construction and Building Materials, 22, 2015–2024.10.1016/j.conbuildmat.2007.07.009
   Web of Science ®Google Scholar
• Apeagyei, A.K., Grenfell, J.R.A., and Airey, G.D., 2014. Moisture-induced strength degradation of aggregate–asphalt mastic bonds. Road Materials and Pavement Design, 15 (S1), 239–262.10.1080/14680629.2014.927951
   Web of Science ®Google Scholar
• Arabani, M. and Hamedi, Gh.H, 2011. Using the surface free energy method to evaluate the effects of polymeric aggregate treatment on moisture damage in hot-mix asphalt. Journal of Materials in Civil Engineering, 23, 802–811.10.1061/(ASCE)MT.1943-5533.0000228
   Web of Science ®Google Scholar
• Caro, S., et al., 2008. Moisture susceptibility of asphalt mixtures, part 1: mechanisms. International Journal of Pavement Engineering, 9 (2), 81–98.10.1080/10298430701792128
   Google Scholar
• Castan, M., 1968. Rising of binder to the surface of an open-graded bituminous mix. Bulletin de liaison des laboratoires routiers, 33, 77–84.
   Google Scholar
• Cheng, D., (2002). surface free energy of asphalt-aggregate system and performance analysis of asphalt concrete based on surface free energy. Thesis (PhD). College Station: Texas A&M University.
   Google Scholar
• Cheng, D., et al., 2002. Surface energy measurement of asphalt and its application to predicting fatigue and healing in asphalt mixtures. Transportation Research Record: Journal of the Transportation Research Board, 1810, 44–53.10.3141/1810-06
   Web of Science ®Google Scholar
• Cho, D.W. and Kim, K., 2010. The mechanisms of moisture damage in asphalt pavement by applying chemistry aspects. KSCE Journal of Civil Engineering, 14 (3), 333–341.10.1007/s12205-010-0333-z
   Web of Science ®Google Scholar
• Cho, D.W., Kim, K., and Lee, M.J., 2010. Chemical model to explain asphalt binder and asphalt–aggregate interface behaviors. Canadian Journal of Civil Engineering, 37, 45–53.10.1139/L09-163
   Web of Science ®Google Scholar
• Cui, S., et al., 2014. Durability of asphalt mixtures: Effect of aggregate type and adhesion promoters. International Journal of Adhesion & Adhesives, 54, 100–111.
   Web of Science ®Google Scholar
• Curtis, C., Woong-Jeon, W., and Clap, D.G., 1988. Adsorption of asphalt functionalities and oxidized asphalts on aggregate surfaces. Fuel Science and Technology International, 7 (9), 1225–1268.
   Google Scholar
• Curtis, C.W., Lytton, R., and Brannan, J., 1992. Influence of aggregate chemistry on the adsorption and desorption of asphalt. Transportation Research Record, 1362, 1–9.
   Google Scholar
• Fromm, H.J., 1974. The mechanisms of asphalt stripping from aggregate surfaces. Proceeding of the Association of Asphalt Paving Technologists, 43, 191–223.
   Google Scholar
• Hamzah, M.O., Kakar, M.R., and Hainin, M.R., 2015. An overview of moisture damage in asphalt mixtures. Jurnal Teknologi (Sciences & Engineering), 73 (4), 125–131.
   Google Scholar
• Hefer, A., Bhasin, A., and Little, D., 2006. Bitumen surface energy characterization using a contact angle approach. Journal of Materials in Civil Engineering, 18 (6), 759–767.10.1061/(ASCE)0899-1561(2006)18:6(759)
   Web of Science ®Google Scholar
• Huang, S., Branthaver, J., and Robertson, R., 2002. Interaction of asphalt films with aggregate surfaces in the presence of water. Road Materials and Pavement Design, 3 (1), 23–48.10.1080/14680629.2002.9689914
   Google Scholar
• Jakarni, F., (2002). Adhesion of asphalt mixtures. Thesis (PhD). University of Nottingham.
   Google Scholar
• Kanitpong, K., et al., 2007. Laboratory study on warm mix asphalt additives. In: 86th Annual Meeting of the Transportation Research Board. Washington, DC.
   Google Scholar
• Kim, Y.R., Lee, H., and Little, D., 1997. Fatigue characterization of asphalt concrete using viscoelasticity and continuum damage mechanics. Journal of Association of Asphalt Paving Technologists, 66, 520–569.
   Google Scholar
• Little, D. and Bhasin, A., 2006. Using surface energy measurements to select materials for asphalt pavements. In: NCHRP Project 9-37. Washington, DC.
   Google Scholar
• Little, D. and Jones, D., 2003. Chemical and mechanical processes of moisture damage in hot-mix asphalt pavements. In: Moisture sensitivity of asphalt pavements, National Seminar, Transportation Research Board. San Diego.
   Google Scholar
• Liu, Y., et al., 2014. Examination of moisture sensitivity of aggregate–bitumen bonding strength using loose asphalt mixture and physico-chemical surface energy property tests. International Journal of Pavement Engineering, 15 (7), 657–670.10.1080/10298436.2013.855312
   Web of Science ®Google Scholar
• Plancher, H., Dorrence, S., and Petersen, J.C., 1977. Identification of chemical types in asphalts strongly absorbed at the asphalt-aggregate interface and their relative displacement by water. Proceedings Association of Asphalt Paving Technologists, 46, 151–175.
   Google Scholar
• Petersen, J.C., et al., 1994. Binder characterization and evaluation. Vol. 1. In: SHRP-A-367, Strategic Highways Research Program. Washington, DC: National Research Council.
   Google Scholar
• Rice, J.M., 1958. Relationship of aggregate characteristics to the effect of water on bituminous paving mixtures. American Society for Testing and Materials ASTM STP, 240, 17–33.
   Google Scholar
• Robertson, R.E., 1988. Chemical properties of asphalts and their effects on pavement performance. Transportation Research Circular, 499, 1–46.
   Google Scholar
• Scott, J.A.N., 1978. Adhesion and disbonding mechanisms of asphalt used in highway construction and maintenance. Proceedings, Association of Asphalt Paving Technologists, 47, 19–48.
   Google Scholar
• Tarrer, A.R. and Wagh, V., 1991. The effect of the physical and chemical characteristics of the aggregate on bonding. In: SHRP-A/UIR-91-507, SHRP National Research Council, Washington, DC.
   Google Scholar
• Terrel, R.L. and Al-Swailmi, S., 1994. Water sensitivity of asphalt–aggregate mixes: test selection. In: SHRP Report A-403, SHRP National Research Council, Washington, DC.
   Google Scholar
• Thelen, E., 1958. Surface energy and adhesion properties in asphalt–aggregate systems. In: Bulletin 192, HRB, National Research Council, Washington, DC.
   Google Scholar
• Valdés-Vidal, G., et al., 2015. Mechanical behavior of asphalt mixtures with different aggregate type. Construction and Building Materials, 101, 474–481.10.1016/j.conbuildmat.2015.10.050
   Web of Science ®Google Scholar
• Van Oss, C.J., Chaudhury, M.K., and Good, R.J., 1998. Interfacial Lifshitz-Van der Waals and polar interactions in macroscopic systems. Chemical Reviews, 88 (6), 927–941.
   Google Scholar
• Vargas-Nordcbeck, A., et al., 2016. Evaluating moisture susceptibility of asphalt concrete mixtures through simple performance tests. Transportation Research Record: Journal of the Transportation Research Board, 2575, 70–78.
   Web of Science ®Google Scholar
• Zhang, J., et al., 2015. Influence of aggregate mineralogical composition on water resistance of aggregate–bitumen adhesion. International Journal of Adhesion & Adhesives, 62, 45–54.
   Web of Science ®Google Scholar