References
- American Association of State Highway and Transportation Officials , 1993. AASHTO guide for design of pavement structures . Washington, DC.
- American Association of State Highway and Transportation Officials , 2005. AASHTO standard method of test for coefficient of thermal expansion of hydraulic cement concrete . Washington, DC, TP 60–00.
- American Association of State Highway and Transportation Officials , 2011. AASHTO standard method of test for coefficient of thermal expansion of hydraulic cement concrete . Washington, DC, T 336–11.
- American Association of State Highway and Transportation Officials , 2015. Mechanistic-empirical pavement design guide – a manual of practice . 2nd ed. American Association of State Highway and Transportation Officials.
- American Concrete Pavement Association , 1991. ACPA design and construction of joints for concrete streets , TB–010.0D. Skokie.
- Applied Research Associates, Inc. ERES Division , 2004. Guide for mechanistic-empirical design of new and rehabilitated pavement structure . Washington, DC: Transportation Research Board of the National Academies, Final Report NCHRP 1-37A.
- Caltrans , 2008. Guide for design and construction of new jointed plain concrete pavements . Available from http://www.dot.ca.gov/hq/maint/Pavement/Offices/Pavement_Engineering/PDF/JPCP-Design-Construction-Guide.pdf [Accessed July 2014].
- Ceylan H. , et al. , 2013. Iowa calibration of MEPDG performance prediction models . Trans Project 11-401, Institute for Transportation, Iowa State University.
- Darter, M.I. , et al. , 2011. Recalibration of MEPDG rigid pavement national models based on corrected CTE values draft guide . Champaign, IL: Applied Research Associates, NCHRP Project 20-07, Task 288, National Cooperative Highway Research Program Transportation Research Board.
- Darter M.I. , et al. , 2014. Calibration and implementation of the AASHTO Mechanistic-empirical pavement design guide in Arizona . Phoenix, AZ: Arizona Department of Transportation, Report to Arizona Department of Transportation (FHWA-AZ-14-606).
- Hall, K.T. , et al. 1997. LTPP data analysis phase I: validation of guidelines for k-value selection and concrete pavement performance prediction . McLean, VA: Federal Highway Administration, FHWA Report FHWA-RD-96-198.
- Li, J. , et al. , 2011. Use of the 1993 AASHTO Guide, MEPDG and historical performance to update the WSDOT pavement design catalog . Tumwater, WA: Washington State Department of Transportation, WSDOT Research Report WA-RD 779.1.
- Mallela, J. , et al. , 2009. Implementing the AASHTO Mechnistic-empirical pavement design guide in Missouri, volume 2-MEPDG model validation and calibration . Jefferson City, MO: Missouri Department of Transportation, Final Report to Missouri Department of Transportation, MODOT study R104-002.
- Mallela J. , et al. , 2013. Implementation of the AASHTO Mechanistic-empirical pavement design guide for Colorado . Denver, CO: Colorado Department of Transportation, Final Report to Colorado Department of Transportation (CDOT-2013-4).
- Mu, F. , et al. , 2012. An evaluation of JPCP faulting and transverse cracking models of the mechanistic-empirical pavement design guide. Road Materials and Pavement Design. , 13 (1), 128–141.10.1080/14680629.2011.644179
- Rodden, R. , Voigt, G. , and Wathne, L. , 2014. Comparison of Roadway Jointed Plain Concrete Pavement (JPCP) Thickness Design Methods Common in the United States (U.S). . 12th International Symposium on Concrete Roads. Prague, Czech Republic.
- Titus-Glover, L. and Mallela J. , 2009. Guidelines for Implementing NCHRP 1-37A M-E Design Procedures in Ohio: Volume 4-MEPDG Models Validation & Recalibration . FHWA/OH-2009/9D
- Wu Z. , et al. , 2014. Evaluation of AASHTO Pavement ME for Louisiana rigid pavement design . Transportation Research Board Annual Meeting, Washington, DC: Transportation Research Board of the National Academies.