Evaluation and modelling of permanent deformation behaviour of asphalt mixtures using dynamic creep test in uniaxial mode

References

• Alatas, T. , et al. , 2012. Comparison of permanent deformation and fatigue resistance of hot mix asphalts prepared with the same performance grade binders. Construction and Building Materials , 30, 66–72. doi:10.1016/j.conbuildmat.2011.12.021.
   Web of Science ®Google Scholar
• Al-Khateeb, G.G. , et al. , 2013. Laboratory study for comparing rutting performance of limestone and basalt superpave asphalt mixtures. Journal of Materials in Civil Engineering , 25 (1), 21–29. doi:10.1061/(ASCE)MT.1943-5533.0000519.
   Web of Science ®Google Scholar
• Al-Qadi, I. , et al. , 2009. Creep behavior of hot-mix asphalt due to heavy vehicular tire loading. Journal of Engineering Mechanics , 135 (11), 1265–1273. doi:10.1061/(ASCE)0733-9399(2009)135:11(1265).
   Web of Science ®Google Scholar
• Ameri, M. , Mansourian, A. , and Sheikhmotevali, A.M. , 2013. Laboratory evaluation of ethylene vinyl acetate modified bitumens and mixtures based upon performance related parameters. Construction and Building Materials , 40, 438–447. doi:10.1016/j.conbuildmat.2012.09.109.
   Web of Science ®Google Scholar
• Archilla, A. , Diaz, L. , and Carpenter, S. , 2007. Proposed method to determine the flow number in bituminous mixtures from repeated axial load tests. Journal of Transportation Engineering , 133 (11), 610–617. doi:10.1061/(ASCE)0733-947X(2007)133:11(610).
   Google Scholar
• Avar, V. , 2013. Determination of plastic deformation with cyclic compression test. Presented in Second Conference of Junior Researchers in Civil Engineering , 17–18 June. Budapest, Hungary.
   Google Scholar
• Bai, F. , et al. , 2012. Prediction method of long-term mechanical behavior of largely deformed sand asphalt with constant loading creep tests. Journal of Engineering Mechanics , 138 (12), 1457–1467. doi:10.1061/(ASCE)EM.1943-7889.0000452.
   Web of Science ®Google Scholar
• Bai, F. , et al. , 2014. Modified cross model for predicting long-term creep behavior of sand asphalt. Construction and Building Materials , 65, 43–50. doi:10.1016/j.conbuildmat.2014.04.102.
   Web of Science ®Google Scholar
• Baladi, G. Y. , Haider, S.W. , and Mirza,M.W. , 2011. Implementation of superpave binder and asphalt mix specification to improve pavement performance in Pakistan . Final Report under Pakistan-US science and technology cooperative program, submitted to The National Academies Policy and Global Affairs Washington, DC, Prepared by Lahore, Pakistan: Department of Civil & Environmental Engineering, Michigan State University, Michigan, USA and University of Engineering and Technology (UET).
   Google Scholar
• Boateng, J.A. and Maina, J. , 2012. Permanent deformation testing for a new South African mechanistic pavement design method. Construction and Building Materials , 26, 541–546. doi:10.1016/j.conbuildmat.2011.06.055.
   Web of Science ®Google Scholar
• British Standard Institution , 2005. BS EN 12697-25. Bituminous mixtures- Test methods for hot mix asphalt – Part 25 Cyclic compression test. London.
   Google Scholar
• Chen, M. , et al. , 2011. Utilization of recycled brick powder as alternative filler in asphalt mixture. Construction and Building Materials , 25, 1532–1536. doi:10.1016/j.conbuildmat.2010.08.005.
   Web of Science ®Google Scholar
• Chen, J.S. , Wong, S.Y. , and Lin, K.Y. , 2005. Quantification of movements of flat and elongated particles in hot mix asphalt subject to wheel load test. Materials and Structures , 38, 395–402. doi:10.1617/14151.
   Web of Science ®Google Scholar
• Erzin, Y. and Cetin, T. , 2012. The use of neural networks for the prediction of the critical factor of safety of an artificial slope subjected to earthquake forces. Scientia Iranica , 19 (2), 188–194. doi:10.1016/j.scient.2012.02.008.
   Web of Science ®Google Scholar
• Feyissa, B.A. , 2009. Analysis and modeling of rutting for long life asphalt concrete pavement . Thesis (PhD). Technische Universität Darmstadt.
   Google Scholar
• Ghanizadeh, A.R. and Rahrovan, M. , 2016. Application of Artificial neural network to predict resilient modulus of stabilized base subjected to wet-dry cycles. Computations and Materials in Civil Engineering , 1 (1), 37–47.
   Google Scholar
• Gul, W.A. , 2008. Effect of recycled cement concrete content on rutting behavior of asphalt concrete . Thesis (MSc): Middle East Technical University, Ankara.
   Google Scholar
• Hussan, S. , et al. , 2017. Statistical evaluation of factors affecting the laboratory rutting susceptibility of asphalt mixtures. International Journal of Pavement Engineering , doi:10.1080/10298436.2017.1299527.
   Web of Science ®Google Scholar
• Imaninasab, R. , Bakhshi, B. , and Shirini, B. , 2016. Rutting performance of rubberized porous asphalt using Finite Element Method (FEM). Construction and Building Materials , 106, 382–391. doi:10.1016/j.conbuildmat.2015.12.134.
   Web of Science ®Google Scholar
• Iwama, M. , 2009. Influence of specimen size and orientation on the mechanical properties of laboratory compacted asphalt specimens . Thesis (MSc). Nottingham: Nottingham Transportation Engineering Centre, The University of Nottingham.
   Google Scholar
• Kok, B.V. , et al. , 2012. Evaluation of the mechanical properties of natural-asphalt modified hot mixtures. International Journal of Materials Research , 103 (4), 506–512. doi:10.3139/146.110654.
   Web of Science ®Google Scholar
• Lee, S. , et al. , 2014. Evaluation of asphalt concrete mixtures for railway track. Construction and Building Materials , 73, 13–18. doi:10.1016/j.conbuildmat.2014.09.053.
   Web of Science ®Google Scholar
• Mahmud, M.Z.H. , et al. , 2014. Laboratory investigation on the effects of flaky aggregates on dynamic creep and resilient modulus of asphalt mixtures. Jurnal Teknologi , 70 (4), 107–110.
   Google Scholar
• Mirza, M.W. , Abbas, Z. , and Rizwi, M.A. , 2011. Temperature zoning of Pakistan for asphalt mix design. Pakistan Journal of Engineering and Applied Sciences , 8, 49–60.
   Google Scholar
• Moghaddam, T.B. , Soltani, M. , and Karim, M.R. , 2014. Evaluation of permanent deformation characteristics of unmodified and Polyethylene Terephthalate modified asphalt mixtures using dynamic creep test. Materials and Design , 53, 317–324. doi:10.1016/j.matdes.2013.07.015.
   Web of Science ®Google Scholar
• Ozen, H. , 2011. Rutting evaluation of hydrated lime and SBS modified asphalt mixtures for laboratory and field compacted samples. Construction and Building Materials , 25, 756–765. doi:10.1016/j.conbuildmat.2010.07.010.
   Web of Science ®Google Scholar
• Putra Jaya, R. , et al. , 2014. Effect of aggregate shape on the properties of asphaltic concrete AC14. Jurnal Teknologi , 71 (3), 69–73.
   Google Scholar
• Radziszewski, P. , 2007. Modified asphalt mixtures resistance to permanent deformations. Journal of Civil Engineering and Management , 13 (4), 307–315. doi:10.1080/13923730.2007.9636451.
   Google Scholar
• Rushing, J. and Little, D. , 2014. Static creep and repeated load as rutting performance tests for airport HMA mix design. Journal of Materials in Civil Engineering , 26 (9), 04014055. doi:10.1061/(ASCE)MT.1943-5533.0000952.
   Web of Science ®Google Scholar
• Sengul, C.E. , et al. , 2012. Hydrated lime treatment of asphalt concrete to increase permanent deformation resistance. Construction and Building Materials , 30, 139–148. doi:10.1016/j.conbuildmat.2011.12.031.
   Web of Science ®Google Scholar
• Sengul, C.E. , et al. , 2013. Evaluation of SBS modified stone mastic asphalt pavement performance. Construction and Building Materials , 41, 777–783. doi:10.1016/j.conbuildmat.2012.12.065.
   Web of Science ®Google Scholar
• Seo, Y. , et al. , 2007. Air void models for the dynamic modulus, fatigue cracking, and rutting of asphalt concrete. Journal of Materials in Civil Engineering , 19 (10), 874–883. doi:10.1061/(ASCE)0899-1561(2007)19:10(874).
   Web of Science ®Google Scholar
• Suo, Z. and Wong, W.G. , 2009. Nonlinear properties analysis on rutting behaviour of bituminous materials with different air void contents. Construction and Building Materials , 23, 3492–3498. doi:10.1016/j.conbuildmat.2009.07.004.
   Web of Science ®Google Scholar
• Tapkin, S. , Cevik, A. , and Usar, U. , 2009. Accumulated strain prediction of polypropylene modified marshall specimens in repeated creep test using artificial neural networks. Expert Systems with Applications , 36, 11186–11197. doi:10.1016/j.eswa.2009.02.089.
   Web of Science ®Google Scholar
• Tapkin, S. and Keskin, M. , 2013. Rutting analysis of 100 mm diameter polypropylene modified asphalt specimens using gyratory and Marshall compactors. Materials Research , 16 (2), 546–564. doi:10.1590/S1516-14392013005000016.
   Web of Science ®Google Scholar
• Walubita, L.F. , et al. , 2012. Comparison of the Hamburg, dynamic modulus, and repeated load tests for evaluation of HMA permanent deformation. Presented in Transportation Research Board 91st Annual Meeting , 22–26 January. Washington, DC.
   Google Scholar
• Williams S.G. , 2003. The effects of HMA mixture characteristics on rutting susceptibility. 82nd Annual Meeting of the Transportation Research Board . 12–16 January. Washington, DC.
   Google Scholar
• Yilmaz, I. and Kaynar, O. , 2011. Multiple regression, ANN (RBF, MLP) and ANFIS models for prediction of swell potential of clayey soils. Expert Systems with Applications , 38, 5958–5966. doi:10.1016/j.eswa.2010.11.027.
   Web of Science ®Google Scholar
• Zhang, J. , et al. , 2013. Comparison of flow number, dynamic modulus, and repeated load tests for evaluation of HMA permanent deformation. Construction and Building Materials , 44, 391–398. doi:10.1016/j.conbuildmat.2013.03.013.
   Web of Science ®Google Scholar
• Zhang, L. , et al. , 2015. Viscoelastic model of asphalt mixtures under repeated load. Journal of Materials in Civil Engineering , 27 (10), 04015007. doi:10.1061/(ASCE)MT.1943-5533.0001256.
   Web of Science ®Google Scholar
• Ziari, H. , Babagoli, R. , and Akbari, A. , 2015. Investigation of fatigue and rutting performance of hot mix asphalt mixtures prepared by bentonite-modified bitumen. Road Materials and Pavement Design , 16 (1), 101–118. doi:10.1080/14680629.2014.982156.
   Web of Science ®Google Scholar