On measurement of dynamic modulus for bituminous mixtures

References

• AASHTO: TP-62 , 2009. Standard method of test for determining the dynamic modulus of hot mix asphalt concrete mixtures . Washington, DC: American Association of State Highway and Transportation Officials.
   Google Scholar
• AASHTO: TP-79 , 2010. Standard method of test for determining the dynamic modulus and flow number for hot mix asphalt using the asphalt mixture performance tester (AMPT) . Washington, DC: American Association of State Highway and Transportation Officials.
   Google Scholar
• ASTM: D7981-15 , 2015. Standard practice for compaction of prismatic asphalt specimens by means of the shear box compactor . West Conshohocken, PA: ASTM International.
   Google Scholar
• ASTM: D6373-16 , 2016. Standard specification for performance graded asphalt binder . West Conshohocken, PA: ASTM International.
   Google Scholar
• Bonaquist, R.F. , Christensen, D.W. , and William, S. , 2003. NCHRP Report - 513, simple performance tester for superpave mix design: first-article development and evaluation . Washington, DC: National Cooperative Highway Research Program, Transportation Research Board.
   Google Scholar
• Bonaquist, R. , 2008. NCHRP Report - 629, ruggedness testing of the dynamic modulus and flow number tests with the simple performance tester . Washington, DC: Transportation Research Board.
   Google Scholar
• Buttlar, W.G. and Al-Khateeb, G.G. , 2003. Evaluating creep compliance of asphaltic paving mixtures using a hollow-cylinder tensile tester. In: Proceedings of the Third International RILEM Symposium on Performance Testing and Evaluation of Bituminous Materials , Zurich, Switzerland, 1–8.
   Google Scholar
• Cragg, R. and Pell, P.S. , 1971. The dynamic stiffness of bituminous road materials. Journal of the Association of Asphalt Paving Technologist , 40, 126–147.
   Google Scholar
• Findley, W.N. , Lai, J.S. , and Onaran, K. , 1989. Creep and relaxation of nonlinear viscolastic materials – with an introduction to linear viscoelasticity . New York: Dover.
   Google Scholar
• Gibson, N. , et al. , 2012. Full-scale accelerated performance testing for superpave and structural validation . Technical report FHWA-HRT-11-045, Federal Highway Administration.
   Google Scholar
• IS 15462-04 , 2004. Indian standard specification for polymer and rubber modified bitumen . New Delhi: Bureau of Indian Standards.
   Google Scholar
• IS: 73-13 , 2013. Specification for paving bitumen . New Delhi: Bureau of Indian Standards.
   Google Scholar
• Kallas, B.F. , 1970. Dynamic modulus of asphalt concrete in tension and tension-compression. Journal of the Association of Asphalt Paving Technologist , 39, 1–23.
   Google Scholar
• King, S. , 2015. RE: Dynamic modulus testing – request for introducing rest periods . Email, [email protected].
   Google Scholar
• Lee, K. , et al. , 2007. Dynamic modulus of asphalt mixtures for development of korean pavement design guide. Journal of Testing and Evaluation , 35 (2), 143–150.
   Web of Science ®Google Scholar
• Levenberg, E. and Shah, A. , 2008. Interpretation of complex modulus test results for asphalt-aggregate mixes. J. Phys. , 36 (4), 1–9.
   Google Scholar
• Liu, Y. , et al. , 2010. Postprocessing Method for dynamic modulus tests of hot-mix asphalt. Journal of Materials in Civil Engineering , 22 (July), 658–666.
   Google Scholar
• MATLAB , 2010. Version 7.10.0 (R2010a) . Natick, MA: The MathWorks Inc.
   Google Scholar
• MoRTH , 2013. Specification for road & bridge works (Fifth Revision) . New Delhi: Ministry of Road Transport and Highways, Indian Roads Congress.
   Google Scholar
• Mullen, W.G. , 1967. Beam flexure and permeability testing of bituminous pavement samples. Journal of the Association of Asphalt Paving Technologist , 36, 615–631.
   Google Scholar
• NCHRP: 1-37A , ed., 2004. Guidelines for the mechanistic – empirical design for new and rehabilitated pavement structures . Washington, DC: Transportation Research Board.
   Google Scholar
• Partl, M.N. and Piber, H. , 2003. RILEM: interlaboratory tests on performance prediction of pavements. In: Sixth International RILEM Symposium on Performance Testing and Evaluation of Bituminous Materials , Zurich.39–55.
   Google Scholar
• Pavlovich, R.D. and Goetz, W.H. , 1976. Direct tension test results for some asphalt concretes. Journal of the Association of Asphalt Paving Technologist , 45, 400–428.
   Google Scholar
• Pronk, A.C. , 1997. Healing during fatigue in 4 point dynamic bending tests . Report: W-DWW-97-095, DWW, Delft, The Netherlands.
   Google Scholar
• Shook, J.F. and Kallas, B.F. , 1969. Factors influencing dynamic modulus of asphalt concrete. Journal of the Association of Asphalt Paving Technologist , 38, 140–178.
   Google Scholar
• Shu, X. and Huang, B. , 2008. Dynamic modulus prediction of HMA mixtures based on the viscoelastic micromechanical model. Journal of Materials in Civil Engineering , 20 (August), 530–538.
   Google Scholar
• UTS006 , 2007. SPT dynamic modulus test software reference . Australia: IPC Global.
   Google Scholar
• Von Quintus, H.L. , Rauhut, J.B. , and Kennedy, T.W. , 1982. Comparisons of asphalt concrete stiffness as measured by various testing techniques. Journal of the Association of Asphalt Paving Technologist , 51, 35–52.
   Google Scholar
• Wineman, A.S. and Rajagopal, K.R. , 2000. Mechanical response of polymers – an introduction . Cambridge: Cambridge University Press.
   Google Scholar
• Witczak, M.W. , et al. , 2002. NCHRP Report - 465, simple performance test for superpave mix design . Washington, DC: National Cooperative Highway Research Program, Transportation Research Board.
   Google Scholar
• Witczak, M. , 2005. NCHRP Report - 547, simple performance tests: summary of recommended methods and database . Washington, DC: National Cooperative Highway Research Program, Transportation Research Board.
   Google Scholar