References
- AASHTO, 1993. American Association of State Highway Transportation Officials guide for design of pavement structures. 1. AASHTO.
- Asphalt Recycling & Reclaiming Association (ARRA), 2015. Basic asphalt recycling manual. Annapolis, MD: U.S. Department of Transportation Federal Highway Administration.
- Bahia, H.U., et al., 2000. Layer coefficients for new and reprocessed asphaltic mixes. Madison, WI: Wisconsin Dept. of Transportation, Division of Transportation Infrastructure Development, Bureau of Highway Construction, Technology Advancement Unit, WI/SPR-04-00.
- Buss, A., Mercado, M.G., and Schram, S., 2016. Long-term evaluation of cold-in-place recycling and factors influencing performance. Journal of Performance of Constructed Facilities, 31 (3), 04016111. doi: 10.1061/(ASCE)CF.1943-5509.0000985
- Cross, S., 1999. Experimental cold in-place recycling with hydrated lime. Transportation Research Record: Journal of the Transportation Research Board, 1684, 186–193. Available from: http://trrjournalonline.trb.org/doi/10.3141/1684-22 [Accessed 8 November 2016].
- Diefenderfer, B.K. and Apeagyei, A.K., 2014. I-81 In-Place Pavement Recycling Project. Available from: https://trid.trb.org/view.aspx?id=1320981 [Accessed 8 November 2016].
- Florida, D.O.T, 2016. Flexible pavement design manual office of design, pavement management section January 2018 tallahassee, Florida topic #625-010-002. (September). Available from: http://www.fdot.gov/roadway/pm/pcs/flexiblepavementmanual.pdf [Accessed 8 November 2016].
- Jahren, C. and Chen, D., 2007. Evaluation of long-term field performance of cold in-place recycled roads: summary report. Available from: http://www.ctre.iastate.edu/reports/tr502-summary.pdf [Accessed 8 November 2016].
- Kavussi, A. and Modarres, A., 2010. Laboratory fatigue models for recycled mixes with bitumen emulsion and cement. Construction and Building Materials, 24 (10), 1920–1927. Available from: http://www.sciencedirect.com/science/article/pii/S0950061810001297 [Accessed 8 November 2016]. doi: 10.1016/j.conbuildmat.2010.04.009
- Kim, Y., Im, S., and Lee, H.D., 2010. Impacts of curing time and moisture content on engineering properties of cold in-place recycling mixtures using foamed or emulsified asphalt. Journal of Materials in Civil Engineering, 23 (5), 542–553. doi: 10.1061/(ASCE)MT.1943-5533.0000209
- Kim, Y. and Lee, H.D., 2006. Development of mix design procedure for cold in-place recycling with foamed asphalt. Journal of Materials in Civil Engineering, 18 (1), 116–124. Available from: http://ascelibrary.org/doi/10.1061/%28ASCE%290899-1561%282006%2918%3A1%28116%29 [Accessed 8 November 2016]. doi: 10.1061/(ASCE)0899-1561(2006)18:1(116)
- Kim, Y., Lee, H.D., and Heitzman, M., 2007. Validation of new mix design procedure for cold in-place recycling with foamed asphalt. Journal of Materials in Civil Engineering, 19 (11), 1000–1010. Available from: http://ascelibrary.org/doi/10.1061/%28ASCE%290899-1561%282007%2919%3A11%281000%29 [Accessed 8 November 2016]. doi: 10.1061/(ASCE)0899-1561(2007)19:11(1000)
- Kim, Y., Lee, H.D., and Heitzman, M., 2009. Dynamic modulus and repeated load tests of cold in-place recycling mixtures using foamed asphalt. Journal of Materials in Civil Engineering, 21 (6), 279–285. Available from: http://ascelibrary.org/doi/10.1061/%28ASCE%290899-1561%282009%2921%3A6%28279%29 [Accessed 8 November 2016]. doi: 10.1061/(ASCE)0899-1561(2009)21:6(279)
- Marquis, B., et al., 2003. Determination of structural layer coefficient for roadway recycling using foamed asphalt. Available from: http://rmrc.wisc.edu/wp-content/uploads/2012/10/p26final.pdf [Accessed 8 November 2016].
- Morian, D., Oswalt, J., and Deodhar, A., 2004. Experience with cold in-place recycling as a reflective crack control technique: twenty years later. Transportation Research Record: Journal of the Transportation Research Board, 1869, 47–55. doi: 10.3141/1869-06
- Pouliot, N., Marchand, J., and Pigeon, M., 2003. Hydration mechanisms, microstructure, and mechanical properties of mortars prepared with mixed binder cement slurry-asphalt emulsion. Journal of Materials in Civil Engineering, 15 (1), 54–59. Available from: http://ascelibrary.org/doi/10.1061/%28ASCE%290899-1561%282003%2915%3A1%2854%29 [Accessed 8 November 2016]. doi: 10.1061/(ASCE)0899-1561(2003)15:1(54)
- Schwartz, C.W., Diefenderfer, B.K., and Bowers, B.F., 2017. Material properties of cold in-place recycled and full-depth reclamation asphalt concrete. No. 863. Available from: https://trid.trb.org/view/1498437; https://www.nap.edu/catalog/24902 [Accessed 8 November 2016].
- Schwartz, C.W. and Khosravifar, S., 2013. Design and evaluation of foamed asphalt base materials. Available from: https://trid.trb.org/view.aspx?id=1251068 [Accessed 8 November 2016].
- Tia, M. and Wood, L.E., 1983. Use of asphalt emulsion and foamed asphalt in cold-recycled asphalt paving mixtures. Transportation Research Record, 898, 315–321.
- Wu, Z., Zhang, Z., and Abadie, C., 2013. Determining structural strength of existing asphalt layer using condition survey data. International Journal of Pavement Engineering, 14 (7), 603–611. Available from: http://www.tandfonline.com/doi/abs/10.1080/10298436.2012.677845 [Accessed 8 November 2016].