292
Views
6
CrossRef citations to date
0
Altmetric
Articles

Laboratory evaluation of seashells used as fine aggregate in hot mix asphalt

ORCID Icon, ORCID Icon, ORCID Icon, , &
Pages 620-628 | Received 29 Jan 2018, Accepted 14 Jul 2018, Published online: 26 Jul 2018

References

  • AASHTO, 2007. Standard method of test for resistance of compacted hot mix asphalt (HMA) to moisture-induced damage. AASHTO Standards, T 283, Washington, DC.
  • Arabani, M. and Azarhoosh, A.R, 2012. The effect of recycled concrete aggregate and steel slag on the dynamic properties of asphalt mixtures. Construction and Building Materials, 35, 1–7. doi: 10.1016/j.conbuildmat.2012.02.036
  • Arabani, M., Babamohammadi, S., and Azarhoosh, A.R, 2014. Experimental investigation of seashells used as filler in hot mix asphalt. International Journal of Pavement Engineering, 16 (6), 502–509. doi: 10.1080/10298436.2014.943132
  • Arabani, M., Moghadas Nejad, F., and Azarhoosh, A.R, 2013. Laboratory evaluation of recycled waste concrete into asphalt mixtures. International Journal of Pavement Engineering, 14 (6), 531–539. doi: 10.1080/10298436.2012.747685
  • Balghunaim, F, 1990. Improving the adhesion characteristics of bituminous mixes by washing dust contaminated coarse aggregates. Transportation Research Board, 1323, 134–142.
  • Brown, E.R., McRae, J.L., and Crawley, A.B., 1989. Effect of aggregates on performance of bituminous concrete. ASTM STP 1016, Implication of aggregates in the design, construction, and performance of flexible pavements, Philadelphia, PA.
  • Buckley, J.S. and Liu, Y, 1998. Some mechanisms of crude oil/brine/solid interactions. Journal of Petroleum Science and Engineering, 20 (3), 155–160. doi: 10.1016/S0920-4105(98)00015-1
  • Buckley, J.S., Takamura, K., and Morrow, N.R., 1989. Influence of electrical surface charges on the wetting properties of crude oils. 2nd Annual Technical Conference and Exhibition of the Society of Petroleum Engineers, 27–30 September 1987, Dallas. Dallas: Society of Petroleum Engineers, 332.
  • Chávez, G., 2016. Evaluación geoeconómica del área costera de la Región Piura orientada al estudio de agregados para concreto. Thesis (Engineer). Universidad de Piura.
  • Chierighini, D., Bridi, R., Rocha, A. D. and Lapa, K. R., 2011. Possibilidades do uso das conchas de moluscos. In International Workshop advances in cleaner production (Vol. 3). Sao Paulo, Brazil.
  • Falade, F, 1995. An investigation of periwinkle shells as coarse aggregate in concrete. Building and Environment, 30, 573–577. doi: 10.1016/0360-1323(94)00057-Y
  • García, I., Heras, E., Puertas, F., et al., 2009. Tests on mortars and concrete made with seashells as aggregate. Case Study in Mauritania. Proceedings of the 11th International Conference on Non-conventional Materials and Technologies, Bath, UK, 6–9.
  • Her-Yung, W., Po-Yo, C., and Jeng-Hung, C., 2011. Effect of waste oyster shell resurgent on engineering properties of cement mortar. 2011 International conference on consumer electronics, communications and networks, XianNing, China, 4941–4944.
  • Horgnies, M., Darque-Ceretti, E., Fezai, H., et al., 2011. Influence of the interfacial composition on the adhesion between aggregates and bitumen: investigations by EDX, XPS and peel tests. International Journal of Adhesion and Adhesives, 31 (4), 238–247. doi: 10.1016/j.ijadhadh.2011.01.005
  • Khedaywi, T.S. and Tons, E, 1998. Aggregate rugosity and size effect on bituminous mixes. Journal of the Transportation Research Board, 1619, 26–36. doi: 10.3141/1619-04
  • Kuo, W.-T., et al., 2013. Engineering properties of controlled low-strength materials containing waste oyster shells. Construction and Building Materials, 46, 128–133. doi: 10.1016/j.conbuildmat.2013.04.020
  • Ohimain, E.I., Bassey, S., and Bawo, D.D, 2009. Uses of seas shells for civil construction works in Coastal Bayelsa State, Nigeria: a waste management perspective. Research Journal of Biological Sciences, 4, 1025–1031.
  • Poicón, S, 2014. En Sechura se arrojan 100 mil toneladas al año de residuos de concha de abanico. El Tiempo, 12ve august, 2–3, Actualidad.
  • Prowell, B.D., Zhang, J., and Brown, E.R., 2005. Aggregate properties and the performance of superpave-designed hot mix asphalt (Report 539). Washington, DC: Transportation Research Board.
  • Richardson, A.E., and Fuller, T, 2013. Sea shells used as partial aggregate replacement in concrete. Structural Survey, 31, 347–354. doi: 10.1108/SS-12-2012-0041
  • Safi, B., et al., 2015. The use of seashells as a fine aggregate (by sand substitution) in self-compacting mortar (SCM). Construction and Building Materials, 78, 430–438. doi: 10.1016/j.conbuildmat.2015.01.009
  • Safiuddin, M., et al., 2010. Utilization of solid wastes in construction materials. International Journal of Physical Sciences, 5, 1952–1963.
  • Terrel, R.L. and Al-Swailmi, S., 1994. Water sensitivity of asphalt – aggregate mixes: test selection (Report SHRP-A-403). Washington, DC: National Research Council.
  • Varhen, C., Carrillo, S., and Ruiz, G, 2017. Experimental investigation of Peruvian scallop used as fine aggregate in concrete. Construction and Building Materials, 136, 533–540. doi: 10.1016/j.conbuildmat.2017.01.067
  • Wang, W., et al., 2010. Investigation of the use of strip-prone aggregates in hydraulic asphalt concrete. Construction and Building Materials, 24 (11), 2157–2163. doi: 10.1016/j.conbuildmat.2010.04.043
  • Wheaton, F, 2007. Review of oyster shell properties: Part II. Thermal properties. Aquacultural Engineering, 37, 14–23. doi: 10.1016/j.aquaeng.2006.11.002
  • Xie, X., et al., 2017. Evaluation of morphological characteristics of fine aggregate in asphalt. Construction and Building Materials, 139, 1–8. doi: 10.1016/j.conbuildmat.2017.02.044
  • Yang, E.-I., et al., 2010. Effect of partial replacement of sand with dry oyster shell on the long-term performance of concrete. Construction and Building Materials, 24, 758–765. doi: 10.1016/j.conbuildmat.2009.10.032
  • Yang, E.-I., Yi, S.-T., and Leem, Y.-M, 2005. Effect of oyster shell substituted for fine aggregate on concrete characteristics: Part I. Fundamental properties. Cement and Concrete Research, 35, 2175–2182. doi: 10.1016/j.cemconres.2005.03.016
  • Yoon, G.-L., et al., 2003. Chemical–mechanical characteristics of crushed oyster-shell. Waste Management, 23, 825–834. doi: 10.1016/S0956-053X(02)00159-9

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.