Development of aggregate micro-texture during polishing and correlation with skid resistance

References

• American Association of State Highway and Transportation Officials (AASHTO), 1976. Guidelines for skid resistant pavement design. Washington, DC: American Association of State Highway and Transportation Officials.
   Google Scholar
• American Association of State Highway and Transportation Officials (AASHTO), 2014. AASHTO T279. Standard method of test for accelerated polishing of aggregates using the British wheel. Washington, DC: American Association of State Highway and Transportation Officials.
   Google Scholar
• Araujo, V.M.C., Bessa, I.S., and Castelo Branco, V.T.F., 2015. Measuring skid resistance of hot mix asphalt using the aggregate image measurement system (AIMS). Construction and Building Materials, 98, 476–481. doi: 10.1016/j.conbuildmat.2015.08.117
   Web of Science ®Google Scholar
• ASTM International, 2017a. ASTM D3319-11. Standard practice for the accelerated polishing of aggregates using the British wheel. West Conshohocken, PA: ASTM International.
   Google Scholar
• ASTM International, 2017b. ASTM D6928-17. Standard test method for resistance of coarse aggregate to degradation by abrasion in the micro-Deval apparatus. West Conshohocken, PA: ASTM International.
   Google Scholar
• British Standards Institution, 1990. BS 812-114. Testing aggregates. Method for determination of the polished-stone value (Vol. 1). London: BSI.
   Google Scholar
• British Standards Institution, 2002. EN 1097-1. Tests for mechanical and physical properties of aggregates. Determination of the resistance to wear (micro-Deval) (Vol. 1). London: BSI.
   Google Scholar
• British Standards Institution, 2009. EN 1097-8. Tests for mechanical and physical properties of aggregates. Determination of the polished stone value (Vol. 1). London: BSI.
   Google Scholar
• British Standards Institution, 2014. EN 12697-49. Bituminous mixtures. Test methods for hot mix asphalt. Determination of friction after polishing (Vol. 1). London: BSI.
   Google Scholar
• Chen, X. and Wang, D., 2011. Fractal and spectral analysis of aggregate surface profile in polishing process. Wear, 271 (11), 2746–2750. doi: 10.1016/j.wear.2011.05.024
   Web of Science ®Google Scholar
• Do, M.-T., et al., 2007. Pavement polishing – development of a dedicated laboratory test and its correlation with road results. Wear, 263 (1), 36–42. doi: 10.1016/j.wear.2006.12.086
   Google Scholar
• Dupont, P. and Ganga, Y., 1995. Skid resistance and texture of road surfaces on difficult sites. Paper presented at the World Road Congress, Montreal.
   Google Scholar
• Ech, M., et al., 2012. Qualification of wearing course material surface evolution after durability test. Construction and Building Materials, 35, 313–320. doi: 10.1016/j.conbuildmat.2012.02.081
   Web of Science ®Google Scholar
• Flintsch, G., et al., 2003. Pavement surface macrotexture measurement and applications. Transportation Research Record, 1860 (1860), 168–177. doi: 10.3141/1860-19
   Google Scholar
• Forster, S.W., 1981. Aggregate microtexture: profile measurement and related frictional levels. Transportation Research Record, 1215, 151–164.
   Google Scholar
• Forster, S.W., 1989. Pavement microtexture and its relation to skid resistance. Transportation Research Record, 1215, 151–164.
   Google Scholar
• Fülöp, I., et al., 2000. Use of friction and texture in pavement performance modeling. Journal of Transportation Engineering, 126 (3), 243–248. doi: 10.1061/(ASCE)0733-947X(2000)126:3(243)
   Web of Science ®Google Scholar
• Giles, C., Sabey, B., and Cardew, K., 1962. Development and performance of the portable skid-resistance tester. In: Paper presented at the Symposium on Skid Resistance. New York.
   Google Scholar
• Gunaratne, M., et al., 2000. Correlation of tire wear and friction to texture of concrete pavements. Journal of Materials in Civil Engineering, 12 (1), 46–54. doi: 10.1061/(ASCE)0899-1561(2000)12:1(46)
   Web of Science ®Google Scholar
• Hall, J., et al., 2009. Guide for pavement friction contractor’s final report for National Cooperative Highway Research Program (NCHRP) Project 01-43. Washington, DC: Transportation Research Board of the National Academies.
   Google Scholar
• Hartikainen, L., Petry, F., and Westermann, S., 2014. Frequency-wise correlation of the power spectral density of asphalt surface roughness and tire wet friction. Wear, 317 (1), 111–119. doi: 10.1016/j.wear.2014.05.017
   Web of Science ®Google Scholar
• Henry, J., 2000. Evaluation of pavement friction characteristics: a synthesis of highway practice. NCHRP Synthesis No. 291. Washington, DC: National Cooperative Highway Research Program. Transportation Research Board.
   Google Scholar
• Jayawickrama, P., Prasanna, R., and Senadheera, S., 1996. Survey of state practices to control skid resistance on hot-mix asphalt concrete pavements. Transportation Research Record, 1536, 52–58. doi: 10.1177/0361198196153600108
   Google Scholar
• Kane, M., et al., 2012. Laboratory evaluation of aggregate polishing as a function of load and velocity. Application to the prediction of damages on skid resistance of road surfaces due to trucks and passenger cars. Road Materials and Pavement Design, 13 (2), 312–326. doi: 10.1080/14680629.2011.649424
   Web of Science ®Google Scholar
• Kogbara, R.B., et al., 2016. A state-of-the-art review of parameters influencing measurement and modeling of skid resistance of asphalt pavements. Construction and Building Materials, 114, 602–617. doi: 10.1016/j.conbuildmat.2016.04.002
   Web of Science ®Google Scholar
• Kokkalis, A., Tsohos, G., and Panagouli, O., 2002. Consideration of fractals potential in pavement skid resistance evaluation. Journal of Transportation Engineering, 128 (6), 591–595. doi: 10.1061/(ASCE)0733-947X(2002)128:6(591)
   Google Scholar
• Kouchaki, S., et al., 2017. Evaluation of aggregates surface micro-texture using spectral analysis. Construction and Building Materials, 156, 944–955. doi: 10.1016/j.conbuildmat.2017.08.174
   Web of Science ®Google Scholar
• Lane, D., et al., 2011. Modified micro-Deval procedure for evaluating the polishing tendency of coarse aggregates. Transportation Research Record, 2232, 34–43. doi: 10.3141/2232-04
   Google Scholar
• Leu, M. and Henry, J., 1978. Prediction of skid resistance as a function of speed from pavement texture measurements. Transportation Research Record, 666, 7–13.
   Google Scholar
• Luce, A., et al., 2007. Relationship of aggregate microtexture to asphalt pavement skid resistance. Journal of Testing and Evaluation, 35 (6), 578–588.
   Web of Science ®Google Scholar
• Mahmoud, E. and Masad, E., 2007. Experimental methods for the evaluation of aggregate resistance to polishing, abrasion, and breakage. Journal of Materials in Civil Engineering, 19 (11), 977–985. doi: 10.1061/(ASCE)0899-1561(2007)19:11(977)
   Web of Science ®Google Scholar
• Mayora, J.M.P. and Piña, R.J., 2009. An assessment of the skid resistance effect on traffic safety under wet-pavement conditions. Accident Analysis & Prevention, 41 (4), 881–886. doi: 10.1016/j.aap.2009.05.004
   PubMed Web of Science ®Google Scholar
• Moaveni, M., et al., 2014. Use of advanced aggregate imaging systems to evaluate aggregate resistance to breakage, abrasion, and polishing. Transportation Research Record, 2401, 1–10. doi: 10.3141/2401-01
   Google Scholar
• Perry, M.J., 2014. Role of aggregate petrography in micro-texture retention of greywacke surfacing aggregate. Road Materials and Pavement Design, 15 (4), 791–803. doi: 10.1080/14680629.2014.923781
   Web of Science ®Google Scholar
• Pfeiler, A., 2004. Erhöhung der Griffigkeit von Asphaltstraßen: der Einfluß der Polierresistenz feiner Gesteinskörnungen auf das Griffigkeitsverhalten von Asphaltdeckschichten.
   Google Scholar
• PIARC World Road Association, 1987. Report of the committee on surface characteristics. In: Paper presented at the Proceeding of XVIII World Road Congress. Brussels, Belgium.
   Google Scholar
• PIARC World Road Association, 2003. Road safety manual. In: R2ute market. Durban, South African.
   Google Scholar
• Rezaei, A. and Masad, E., 2013. Experimental-based model for predicting the skid resistance of asphalt pavements. International Journal of Pavement Engineering, 14 (1), 24–35. doi: 10.1080/10298436.2011.643793
   Web of Science ®Google Scholar
• Rezaei, A., Masad, E., and Chowdhury, A., 2011. Development of a model for asphalt pavement skid resistance based on aggregate characteristics and gradation. Journal of Transportation Engineering, 137 (12), 863–873. doi: 10.1061/(ASCE)TE.1943-5436.0000280
   Web of Science ®Google Scholar
• Rizenbergs, R.L., Burchett, J.L., and Napier, C.T., 1973. Skid resistance of pavements. In: Skid resistance of highway pavements. ASTM International.
   Google Scholar
• Rizenbergs, R.L., Burchett, J.L., and Warren, L.A., 1977. Relation of accidents and pavement friction on rural, two-lane roads. Transportation Research Record, 633, 21–27.
   Google Scholar
• Roe, P., Parry, A., and Viner, H., 1998. High and low speed skidding resistance: the influence of texture depth. TRL Report 367. Crowthorne, Berkshire: Transport Research Laboratory.
   Google Scholar
• Schulze, K.-H., 1970. Zur quantitativen Bewertung der Rauheit von Strassenoberflachen in Beziehung zum Reibungswiderstand bei Nasse. Berlin: Bundesminister fur Verkehr.
   Google Scholar
• Senga, Y., et al., 2013. Study of the skid resistance of blends of coarse aggregates with different polish resistances. Construction and Building Materials, 48, 901–907. doi: 10.1016/j.conbuildmat.2013.07.040
   Web of Science ®Google Scholar
• Slimane, A.B., et al., 2008. Characterization of road microtexture by means of image analysis. Wear, 264 (5), 464–468. doi: 10.1016/j.wear.2006.08.045
   Web of Science ®Google Scholar
• Uz, V.E., and Gökalp, İ., 2017. The effect of aggregate type, size and polishing levels to skid resistance of chip seals. Materials and Structures, 50 (2), 126–140. doi: 10.1617/s11527-017-0998-6
   Web of Science ®Google Scholar
• Wang, D., et al., 2011. Optimization of long-term skid resistance on asphalt concrete pavement. In: Paper presented at the 2011 International Conference on Remote Sensing, Environment and Transportation Engineering (RSETE). Nanjing, China. IEEE.
   Google Scholar
• Wang, D., et al., 2013. Influence of different polishing conditions on the skid resistance development of asphalt surface. Wear, 308 (1), 71–78. doi: 10.1016/j.wear.2013.09.013
   Web of Science ®Google Scholar
• Wang, D., et al., 2014. Study of micro-texture and skid resistance change of granite slabs during the polishing with the Aachen Polishing Machine. Wear, 318 (1–2), 1–11. doi: 10.1016/j.wear.2014.06.005
   Web of Science ®Google Scholar
• Wang, D., et al., 2015a. A study of the laboratory polishing behavior of granite as road surfacing aggregate. Construction and Building Materials, 89, 25–35. doi: 10.1016/j.conbuildmat.2015.04.032
   Web of Science ®Google Scholar
• Wang, D., et al., 2015b. Evaluation of aggregate resistance to wear with micro-Deval test in combination with aggregate imaging techniques. Wear, 338, 288–296. doi: 10.1016/j.wear.2015.07.002
   Web of Science ®Google Scholar
• Wang, H., et al., 2015c. Dreidimensionale Charakterisierung der Kornform und Scharfkantigkeit von Gesteinskörnungen mittels Röntgen-Computertomographie. Bautechnik, 90 (9), 436–443.
   Google Scholar
• Wang, D., et al., 2016. Multi-scale study of the polishing behaviour of quartz and feldspar on road surfacing aggregate. International Journal of Pavement Engineering, 1–10.
   Google Scholar
• Wang, D., et al., 2017a. Modeling and testing of road surface aggregate wearing behaviour. Construction and Building Materials, 131, 129–137. doi:10.1016/j.conbuildmat.2016.11.075.
   Web of Science ®Google Scholar
• Wang, H., et al., 2017b. Development of morphological properties of road surfacing aggregates during the polishing process. International Journal of Pavement Engineering, 18 (4), 367–380. doi: 10.1080/10298436.2015.1088153
   Web of Science ®Google Scholar
• Xie, X., et al., 2017. Evaluation of morphological characteristics of fine aggregate in asphalt pavement. Construction and Building Materials, 139, 1–8. doi: 10.1016/j.conbuildmat.2017.02.044
   Web of Science ®Google Scholar
• Zelelew, H., Khasawneh, M., and Abbas, A., 2014. Wavelet-based characterisation of asphalt pavement surface macro-texture. Road Materials and Pavement Design, 15 (3), 622–641. doi: 10.1080/14680629.2014.908137
   Web of Science ®Google Scholar