Optimisation of Marshall Design criteria with central composite design in asphalt concrete

References

• Abu El-Maaty Behiry, A.E., 2016. Optimisation of hot mix asphalt performance based on aggregate selection. International Journal of Pavement Engineering, 17 (10), 924–940. doi:10.1080/10298436.2015.1043634.
   Web of Science ®Google Scholar
• Ahmedzade, P., and Yılmaz, M, 2008. Effects of polyester resin additive on the properties of asphalt binders and mixtures. Contruction and Building Materials, 22 (4), 481–486. doi: 10.1016/j.conbuildmat.2006.11.015
   Web of Science ®Google Scholar
• Ahmedzade, P., Tıgdemir, M., and Kalyoncuoglu, S. F, 2007. Laboratory investigation of the properties of asphalt concrete mixtures modified with TOP–SBS. Construction and Building Materials, 21 (3), 626–633. doi: 10.1016/j.conbuildmat.2005.12.003
   Web of Science ®Google Scholar
• Akay, U., and Demirtaş, E.A, 2014. Degradation of burazol blue ED by heterogeneous fenton process: simultaneous optimization by central composite design. Desalination and Water Treatment, 56 (12), 3346–3356. doi:10.1080/19443994.2014.968630.
   Web of Science ®Google Scholar
• Aksoy, D.O., and Sagol, E, 2016. Application of central composite design method to coal flotation: modelling. optimization and verification. Fuel, 183, 609–616. doi: 10.1016/j.fuel.2016.06.111
   Web of Science ®Google Scholar
• Box, G.E.P., and Wilson, K.B, 1951. On the experimental attainment of optimum conditions. Journal of the Royal Statistical Society, 13 (1), 1–45.
   Google Scholar
• Bu, X., et al., 2016. Kinetic modeling and optimization of flotation process in a cyclonic microbubble flotation column using composite central design methodology. International Journal of Mineral Processing, 157, 175–183. doi: 10.1016/j.minpro.2016.11.006
   Web of Science ®Google Scholar
• Deniz, M.T., and Lav, A.H, 2010. The usage of granular sulfur with bitumen and its effects on the stability. İTÜ Dergisi/Dmühendislik, 9 (6), 137–148.
   Google Scholar
• Derringer, G., and Suich, R, 1980. Simultaneous optimization of several response variables. Journal of Quality Technology, 12 (4), 214–219. doi: 10.1080/00224065.1980.11980968
   Web of Science ®Google Scholar
• Er, A., and Karacasu, M, 2014. Effect of modified bitumen with CR-10 and CR-15 on the performance of asphalt concrete. Ekoloji, 23 (93), 50–56. doi:10.5053/ekoloji.2014.937.
   Web of Science ®Google Scholar
• GDH, and General Directorate of Highways, 2013. Technical specifications of highways. Ankara: General Directorate of Highways.
   Google Scholar
• HarringtonJr., E.C., 1965. The desirability function. Industrial Quality Control, 21 (10), 494–498.
   Google Scholar
• Hernández-Olivares, F., et al., 2009. Rubber-modified hot-mix asphalt pavement by dry process. International Journal of Pavement Engineering, 10 (4), 277–288. doi:10.1080/10298430802169416.
   Web of Science ®Google Scholar
• Khuri, A.I., and Mukhopadhyay, S, 2010. Response surface methodology. John Wiley & Sons. WIREs Computational Statistics, 2, 128–149. doi:10.1002/wics.73.
   Google Scholar
• Kütük-Sert, T., and Kütük, S, 2013. Physical and Marshall properties of Borogypsum used as filler aggregate in asphalt concrete. Journal of Materials Civil Engineering, 25, 266–273. doi: 10.1061/(ASCE)MT.1943-5533.0000580
   Web of Science ®Google Scholar
• Mehrabani, J., et al., 2010. Process optimization and modelling of sphalerite flotation from a low-grade Zn–Pb ore using response surface methodology. Separation and Purification Technology, 72 (2010), 242–249. doi: 10.1016/j.seppur.2010.02.005
   Google Scholar
• Montgomery, D.C., 2012. Design and analysis of experiments (8th ed.). Singapore: Wiley.
   Google Scholar
• Myers, R., 1971. Response surface methodology. Boston: Allyn and Bacon.
   Google Scholar
• Myers, R.H., and Montgomery, D.C., 1995. Response surface methodology, process and product optimization using designed experiments (2nd ed). New York: John Wiley and Sons.
   Google Scholar
• Namlı, R., and Kuloğlu, N, 2007. Experimental comparison of superpave and Marshall methods. IMO Teknik Dergi, Yazı, 270, 4103–4118.
   Google Scholar
• Özkurt, Ö., 1999. Deney tasarımları ve istatistiksel veri analizleri, A thesis of MSc Istanbul Technical University, Graduate School of Science Engineering and Technology.
   Google Scholar
• Taşdemir, Y., 2003. Bitümlü kaplamaların termal davranışlarının performans testleri ile incelenmesi, A thesis of M. Sc. Istanbul Technical University, Graduate School of Science Engineering and Technology.
   Google Scholar
• Turan, M.D., and Altundoğan, H.S, 2011. Use of response surface methods in hydrometallurgical researches. Madencilik, 50 (3), 11–23.
   Google Scholar
• Turkish Standards Institution, 2012. TS EN 12697-34. Bituminous mixtures - Test methods for hot mix asphalt - Part 34: Marshall test.
   Google Scholar
• Vaitkus, A, et al., 2016. Influence of warm mix asphalt technology on asphalt physical and mechanical properties. Construction and Building Materials, 112, 800–806. doi: 10.1016/j.conbuildmat.2016.02.212
   Web of Science ®Google Scholar
• Vatanpour, V., Karami, A., and Sheydaei, M, 2017. Central composite design optimization of Rhodamine B degradation using TiO2 nanoparticles/UV/PVDF process in continuous submerged membrane photoreactor. Chemical Engineering and Processing, 116 (2017), 68–75. doi: 10.1016/j.cep.2017.02.015
   Google Scholar
• White, T.D, 1985. Marshall procedures for design and quality control of asphalt mixtures. Asphalt Paving Technology, 54, 265–284.
   Google Scholar
• Yavuz, A., 2002. In: M. Uluçaylı, ed. Asphalt handbook. Istanbul: Istanbul Metropolitan Municipality: Istanbul Asphalt Plants Industry and Trade Inc.
   Google Scholar
• Yayla, N., 2002. Highway engineering. Istanbul: Birsen Yayınevi.
   Google Scholar