References
- Airey, G.D., 2002. Rheological evaluation of ethylene vinyl acetate polymer modified bitumens. Construction and Building Materials, 16, 473–487.
- Airey, G.D. and Brown, S.F., 1998. Rheological performance of aged polymer modified bitumens. Journal of the Association of Asphalt Paving Technologists, 67, 66–87.
- Airey, G.D., Rahman, M.M., and Collop, A.C., 2003. Absorption of bitumen into crumb rubber using the basket drainage method. International Journal of Pavement Engineering, 4 (2), 105–119.
- Andrade, E.N.D.C., 1930. The viscosity of liquids. Nature, 125, 309–310.
- ASTM D7175, 2008. Standard test method for determining the rheological properties of asphalt binder using a dynamic shear rheometer. West Conshohocken, PA: ASTM International.
- ASTM D2872, 2012. Standard test method for effect of heat and air on a moving film of asphalt (Rolling thin-film oven test). West Conshohocken, PA: ASTM International.
- Becker, Y.M., Muller, A.J., and Rodriguez, Y., 2003. Use of rheological compatibility criteria to study SBS modified asphalts. Journal of Applied Polymer Science, 90, 1772–1782.
- Bonemazzi, F. and Giavarini, C., 1999. Shifting the bitumen structure from sol to gel. Journal of Petroleum Science and Engineering, 22, 17–24.
- Brule, B., 1996. Polymer modified asphalt cements used in the road construction industry: basic principles. Transportation Research Record, 1535, 48–53.
- Chambon, F. and Winter, H.H., 1987. Linear viscoelasticity at the gel point of a crosslinking PDMS with imbalanced stoichiometry. Journal of Rheology, 31, 683–697.
- Claudy, P., et al., 1991. Characterization of paving asphalts by differential scanning calorimetry. Fuel Science and Technology International, 9 (1), 71–92.
- Daly, W.H. and Qiu, Z., 1992. Characterization of microstructure of asphalt and correlation with their performance. ACS Division of Fuel Chemistry, 37 (3), 1329–1334. Preprint.
- Findley, W.N., Lai, J.S., and Onaran, K., 1989. Creep and relaxation of nonlinear viscoelastic materials: with an introduction to linear viscoelasticity. New York: Dover Publications.
- Giavarini, C., et al., 1996. Production of stable polypropylene-modified bitumens. Fuel, 75 (6), 681–686.
- Giavarini, C., Mastrofini, D., and Scarsella, M., 2000. Macrostructure and rheological properties of chemically modified residues and bitumens. Energy & Fuels, 14, 495–502.
- Harsch, M., Herzog, F., and Kocsis, J.K., 2008. Cure-induced normal force development in unfilled and filled epoxy resins. Journal of Composite Materials, 42, 2299–2309.
- Heitzman, M., 1992. Design and construction of asphalt paving materials with crumb rubber modifier. Transportation Research Record, 1339, 1–8.
- Heukelom, W., 1969. A bitumen test data for showing the effect of temperature on the mechanical behavior of asphaltic bitumens. Journal of the Institute of Petroleum, 55, 404–417.
- IS73, 2013. Indian standard for paving bitumen – Fourth revision. New Delhi: Bureau of Indian Standards.
- IS15462, 2004. Indian standard for polymer and rubber modified bitumen. New Delhi: Bureau of Indian Standards.
- Kennedy, T., et al., 1994. SHRP-A-410: Superior performing asphalt pavements (Superpave): the product of the shrp asphalt research program. Washington, DC: National Research Council. Technical report, Strategic highway research program.
- Kraus, G., 1982. Modification of asphalt by block polymers of butadiene and styrene. Rubber Chemistry and Technology, 55 (5), 1389–1402.
- Krishnan, J.M. and Rajagopal, K.R., 2003. Review of the uses and modeling of bitumen from ancient to modern times. Applied Mechanics Review, 56 (2), 149–214.
- Lesueur, D, et al., 1996. A structure related model to describe asphalt linear viscoelasticity. Journal of Rheology, 45 (5), 813–836.
- Li, L. and Aoki, Y., 1997. Rheological images of poly(vinyl chloride) gels. 1. The dependence of sol–gel transition on concentration. Macromolecules, 30 (25), 7835–7841.
- Lu, X. and Isacsson, U., 1998. Chemical and rheological evaluation of ageing properties of SBS polymer modified bitumens. Fuel, 77, 961–972.
- Lu, X. and Isacsson, U., 1999. Chemical and rheological characteristics of styrene-butadiene-styrene polymer-modified bitumens. Transportation Research Record, 1661, 1–18.
- Masson, J.F., Bundalo-Perc, S., and Delgado, A., Feb 2005a. Glass transitions and mixed phases in block SBS. Journal of Polymer Science Part B: Polymer Physics, 43 (3), 276–279.
- Masson, J.F., Polomark, G., and Collins, P., 2005b. Glass transitions and amorphous phases in SBS – bitumen blends. Thermochimica Acta, 436, 96–100.
- Masson, J.F. and Polomark, G.M., July 2001. Bitumen microstructure by modulated differential sanning calorimetry. Thermochimica Acta, 374 (2), 105–114.
- Matéjka, L., 1991. Rheology of epoxy networks near the gel point. Polymer Bulletin, 26, 109–116.
- Nivitha, M.R., Prasad, E., and Krishnan, J.M., 2015. Ageing in modified bitumen using FTIR spectroscopy. International Journal of Pavement Engineering, 17 (7), 565–577.
- Padmarekha, A. and Krishnan, J.M., 2013. Viscoelastic transition of unaged and aged asphalt. Journal of Materials in Civil Engineering, 25 (12), 1852–1863.
- Petersen, J.C., 2009. A review of the fundamentals of asphalt oxidation. Transportation research circular E-C140. Washington, DC: Transportation Research Board.
- Polacco, G., et al., 2005. Asphalt modification with different polyethylene-based polymers. European Polymer Journal, 41, 2831–2844.
- Polacco, G., et al., Dec 2004a. Rheology of asphalts modified with glycidylmethacrylate functionalized polymers. Journal of Colloid and Interface Science, 280 (2), 366–373.
- Polacco, G., et al., Dec 2004b. Temporary networks in polymer-modified asphalts. Polymer Engineering and Science, 44 (12), 2185–2193.
- Presti, D.L., 2013. Recycled tyre rubber modified bitumens for road asphalt mixtures: a literature review. Construction and Building Materials, 49, 863–881.
- Putman, B.J. and Amirkhanian, S.N., 2010. Characterization of the interaction effect of crumb rubber modified binders using HP-GPC. Journal of Materials in Civil Engineering, 22 (2), 153–159.
- Sengoz, B., Topal, A., and Isikyakar, G., 2005. Morphology and image analysis of polymer modified bitumens. Construction and Building Materials, 23 (5), 1986–1992.
- Siddiqui, M.N. and Ali, M.F., 1999. Studies on the aging behavior of the arabian asphalts. Fuel, 78, 1005–1015.
- Storm, D.A., Barresi, R.J., and Sheu, E.Y., 1995. Rheological study of Ratawi vacuum residue in the 298–673 K temperature range. Energy & Fuels, 9, 168–176.
- Stuart, K.D., Mogawer, W.S., and Romero, P., 1999. Validation of asphalt binder and mixture tests that measure rutting susceptibility using the accelerated loading facility. FHWA Report RD-99-204, Federal Highway Administration, McLean, VA.
- Upadhyay, S., et al., 2008. Swelling and diffusion characteristics of polar and nonpolar polymers in asphalt. Journal of Applied Polymer Science, 109, 135–143.
- Verney, V., Michel, A., and Planche, J.-P, 1990. Influence de la tempe´rature sur la viscosite´ complexe dun bitume routier. Cahiers Rhol., 41, 811–819.
- Williams, M.L., Landel, R.F., and Ferry, J.D., 1955. The temperature dependence of relaxation mechanisms in amorphous polymers and other glass forming liquids. Journal of American Chemical Society, 77, 3701–3707.
- Winter, H.H. and Chambon, F., 1986. Analysis of linear viscoelasticity of a crosslinking polymer at the gel point. Journal of Rheology, 30, 367–382.
- Winter, H.H. and Mours, M., 1997. Rheology of polymers near their liquid-solid transitions. Advances in Polymer Science, 134, 165–234.
- Wloczysiak, P, et al., 1997. Relationships between rheological properties, morphological characteristics, and composition of bitumen–styrene butadiene styrene copolymers mixes. I. a three-phase system. Journal of Applied Polymer Science, 65 (8), 1595–1607.