Rheological evaluation of bitumen modified using antistripping additives synthesised from waste polyethylene terephthalate (PET)

References

• AASHTO T313, 2012. Standard method of test for determining the flexural creep stiffness of asphalt binder using the Bending Beam Rheometer (BBR). American Association of State and Highway Transportation Officials.
   Google Scholar
• AASHTO T315–10, 2012. Standard method of test for determining the rheological properties of asphalt binder using a Dynamic Shear Rheometer (DSR). American Association of State and Highway Transportation Officials.
   Google Scholar
• AASHTO T 324–17, 2012. Standard method of test for Hamburg Wheel-track testing of compacted Hot Mix Asphalt (HMA). American Association of State and Highway Transportation Officials.
   Google Scholar
• Ameri, M., et al., 2018. Moisture susceptibility evaluation of asphalt mixtures containing Evonik, Zycotherm and hydrated lime. Construction and Building Materials, 165, 958–965. doi: 10.1016/j.conbuildmat.2017.12.113
   Web of Science ®Google Scholar
• Aschenbrener, T. and Currier, G., 1993. Influence of testing variables on the results from the Hamburg Wheel-tracking device, Report No. CDOT-DTD-R-93–22, Colorado Department of Transportation, Denver, CO.
   Google Scholar
• Gürüa, M., et al., 2014. An approach to the usage of polyethylene terephthalate (PET) waste as roadway pavement material. Journal of Hazardous Materials, 279, 302–310. doi: 10.1016/j.jhazmat.2014.07.018
   PubMed Web of Science ®Google Scholar
• Jain, A. and Soni, R.K., 2007. Spectroscopic investigation of end products obtained by ammonolysis of poly (ethylene terephthalate) waste in the presence of zinc acetate as a catalyst. Journal of Polymer Research, 14, 475–481. doi: 10.1007/s10965-007-9131-9
   Web of Science ®Google Scholar
• Karayannidis, G.P. and Achilias, D.S., 2007. Chemical recycling of poly(ethylene terephthalate), Macromol. Materials Engineering, 292, 128–146.
   Google Scholar
• Leng, Z., et al., 2018. Value-added application of waste PET based additives in bituminous mixtures containing high percentage of reclaimed asphalt pavement (RAP). Journal of Cleaner Production, 196, 615–625. doi: 10.1016/j.jclepro.2018.06.119
   Web of Science ®Google Scholar
• Little, D.N., Allen, D.H., and Bhasin, A., 2018. Chemical and mechanical processes influencing adhesion and moisture damage in Hot Mix Asphalt Pavements. In: Modeling and design of flexible pavements and materials. Cham: Springer, 123–186.
   Google Scholar
• Moghaddam, T.B., Soltani, M., and Karim, M.R., 2014. Evaluation of permanent deformation characteristics of unmodified and polyethylene terephthalate modified asphalt mixtures using dynamic creep test. Materials & Design, 53, 317–324. doi: 10.1016/j.matdes.2013.07.015
   Web of Science ®Google Scholar
• Nazirizad, M., Kavussi, A., and Abdi, A., 2015. Evaluation of the effects of anti-stripping agents on the performance of asphalt mixtures. Construction and Building Materials, 84, 348–353. doi: 10.1016/j.conbuildmat.2015.03.024
   Web of Science ®Google Scholar
• Nikles, D.E. and Farahat, M.S., 2005. New motivation for the depolymerization products derived from poly(ethylene terephthalate) (PET) waste: a review. Macromolecular Materials and Engineering, 290, 13–30. doi: 10.1002/mame.200400186
   Web of Science ®Google Scholar
• Padhan, R.K., et al., 2013. Poly(ethylene terephthalate) waste derived chemicals as an antistripping additive for bitumen—an environment friendly approach for disposal of environmentally hazardous material. Polymer Degradation and Stability, 98, 2592–2601. doi: 10.1016/j.polymdegradstab.2013.09.019
   Web of Science ®Google Scholar
• Pira, S., 2012. The future of global PET packaging to 2017, Market Reports.
   Google Scholar
• Sarker, M. and Rashid, M.M., 2013. Thermal degradation of poly (ethylene terephthalate) waste soft drinks bottles and low-density polyethylene grocery bags. International Journal of Sustainable Energy Environment, 1 (3), 78–86.
   Google Scholar
• Shukla, S.R. and Harad, A. M., 2006. Aminolysis of poly(ethylene terephthalate) waste. Polymer Degradation and Stability, 91, 1850–1854. doi: 10.1016/j.polymdegradstab.2005.11.005
   Web of Science ®Google Scholar
• Sinha, V., Patel, M.R., and Patel, J.V., 2010. Pet waste management by chemical recycling: a review. Journal of Polymers and the Environment, 18, 8–25. doi: 10.1007/s10924-008-0106-7
   Web of Science ®Google Scholar
• Torres, N., Robin, J.J., and Boutevin, B., 2000. Study of thermal and mechanical properties of virgin and recycled poly(ethylene terephthalate) before and after injection molding. European Polymer Journal, 36 (10), 2075–2080. doi: 10.1016/S0014-3057(99)00301-8
   Web of Science ®Google Scholar