Pavement skid resistance as a function of pavement surface and aggregate texture properties

References

• Abdel-Aal, H., 2005. The relation between wear and irreversible entropy generation in the dry sliding metals. Platteville, WI, USA: University of Wisconsin-Platteville. Available from: https://arxiv.org/ftp/arxiv/papers/1008/1008.0412.pdf.
   Google Scholar
• Adelle, W., 2006. Quantitative characterisation of surface finishes on stainless steel sheet using 3D surface topography analysis. Doctoral Thesis. University of Huddersfield, Queensgate, UK.
   Google Scholar
• Arambula, E., et al., 2013. Performance and cost effectiveness of permeable friction course (PFC) pavements. FHWA/TX-12/0-5836-2. Washington, DC: FHWA, U.S. Department of Transportation.
   Google Scholar
• Artyushkova, K., et al., 2015. Relationship between surface chemistry, biofilm structure, and electron transfer in shewanella anodes. American Vacuum Society, 10, 57–64. doi:10.1116/1.4913783.
   Google Scholar
• ASTM E1960-07, 2015. Standard practice for calculating international friction index of a pavement surface. West Conshohocken, PA: ASTM International. doi:10.1520/E1960-07R15.
   Google Scholar
• ASTM E950/E950M-09, 2018. Standard test method for measuring the longitudinal profile of traveled surfaces with an accelerometer-established inertial profiling reference. West Conshohocken, PA: ASTM International. doi:10.1520/E0950_E0950M-09R18.
   Google Scholar
• ASTM Standard E1911-09a, 2009. Standard test method for measuring paved surface frictional properties using the dynamic friction tester. West Conshohocken, PA: ASTM International. doi:10.1520/E1911-09AE01.
   Google Scholar
• ASTM Standard E2157-15, 2015. Standard test method for measuring pavement macro-texture properties using the circular track meter. West Conshohocken, PA: ASTM International. doi:10.1520/E2157-15.
   Google Scholar
• ASTM Standard E274/E274M-11, 2011. Standard test method for skid resistance of paved surfaces using a full-scale tire. West Conshohocken, PA: ASTM International. doi:10.1520/E0274_E0274M-11.
   Google Scholar
• ASTM Standard E670-09, 2009. Standard test method for testing side force friction on paved surfaces using the Mu-meter. West Conshohocken, PA: ASTM International. doi:10.1520/E0670-09.
   Google Scholar
• ASTM Standard E965-15, 2015. Standard test method for measuring pavement macro-texture using a volumetric technique. West Conshohocken, PA: ASTM International. doi:10.1520/E0965-15.
   Google Scholar
• Bessa, I.S., Branco, V.T., and Soares, J.B., 2014. Evaluation of polishing and degradation resistance of natural aggregates and steel slag using the aggregate image measurement system. Road Materials and Pavement Design, 15 (2), 385–405. doi:10.1080/14680629.2014.883323.
   Web of Science ®Google Scholar
• Beyenal, H., et al., 2004. Three-dimensional biofilm structure quantification. Journal of Microbiological Methods, 59 (3), 395–413. doi:10.1016/j.mimet.2004.08.003.
   PubMed Web of Science ®Google Scholar
• Chen, G.M., et al., 2006. Experimental design for measurement on aggregates surface texture. China Journal of Highway & Transport, 19 (2), 36–41. (in Chinese).
   Google Scholar
• Chen, P.C., and Pavlidis, T., 1979. Segmentation by texture using a co-occurrence matrix and a split-and-merge algorithm. Computer Graphics and Image Processing, 10 (2), 172–182. doi:10.1016/0146-664x(79)90049-2.
   Google Scholar
• Davis, L.S., Johns, S.A., and Aggarwal, J.K., 1979. Texture analysis using generalized co-occurrence matrices. IEEE Transactions on Pattern Analysis and Machine Intelligence, 1 (3), 251–259. doi:10.1109/tpami.1979.4766921.
   PubMed Web of Science ®Google Scholar
• Deltombe, R., Kubiak, K.J., and Bigerelle, M., 2011. How to select the most relevant 3D roughness parameters of a surface. Scanning, 36 (1), 150–160. doi:10.1002/sca.21113.
   Google Scholar
• Dunford, A.M., et al., 2012. Three-dimensional characterisation of surface texture for road stones undergoing simulated traffic wear. Wear, 292-293, 188–196. doi:10.1016/j.wear.2012.05.010.
   Web of Science ®Google Scholar
• Flintsch, G.W., et al., 2009. Evaluation of international friction index coefficients for various devices. Transportation Research Record: Journal of the Transportation Research Board, 2094 (1), 136–143, Transportation Research Board of the National Academies, Washington, DC. doi:10.3141/2094-15.
   Google Scholar
• Florková, Z., and Jambor, M., 2017. Quantification of aggregate surface texture based on three dimensional microscope measurement. Procedia Engineering, 192, 195–200. doi:10.1016/j.proeng.2017.06.034.
   Google Scholar
• Fowler, D.W., and Rached, M.M., 2012. Polish resistance of fine aggregates in portland cement concrete pavements. Transportation Research Record: Journal of the Transportation Research Board, 2267, 29–36. doi:10.3141/2267-03.
   Google Scholar
• Hall, J.W., et al., 2009. NCHRP web document 108: guide for pavement friction. Washington, DC: Transportation Research Board of the National Academies.
   Google Scholar
• Hu, L., et al., 2016. Effect of three-dimensional macrotexture characteristics on dynamic frictional coefficient of asphalt pavement surface. Construction and Building Materials, 126, 720–729. doi:10.1016/j.conbuildmat.2016.09.088.
   Web of Science ®Google Scholar
• ISO/TS CD 25178-2, 2012. Geometrical product specification (GPS) – surface texture: areal – part 2. terms, definitions and surface texture parameters. Geneva, Switzerland: International Organization for Standardization (ISO).
   Google Scholar
• Izeppi, E., Flintsch, G., and McGhee, K., 2010. Field performance of high friction surfaces. FHWA/VTRC 10-CR6. Washington, DC: FHWA, U.S. Department of Transportation. Available from: http://www.virginiadot.org/vtrc/main/online_reports/pdf/10-cr6.pdf [Accessed 15 May 2018].
   Google Scholar
• Kargah-Ostadi, N., and Howard, A., 2015. Monitoring pavement surface macro-texture and friction. Transportation Research Record: Journal of the Transportation Research Board, 2525, 111–117. doi:10.3141/2525-12.
   Google Scholar
• Kogbara, R.B., et al., 2018. Relating surface texture parameters from close range photogrammetry to grip-tester pavement friction measurements. Construction and Building Materials, 166, 227–240. doi:10.1016/j.conbuildmat.2018.01.102.
   Web of Science ®Google Scholar
• Leach, R., 2012. Characterisation of areal surface texture. Berlin: Springer-Verlag. doi:10.1007/978-3-642-36458-7.
   Google Scholar
• Li, Q., et al., 2017. Novel macro- and micro-texture indicators for pavement friction by using high-resolution three-dimensional surface data. Transportation Research Record: Journal of the Transportation Research Board, 2641, 164–176. doi:10.3141/2641-19.
   Google Scholar
• Li, S., Zhu, K., and Noureldin, S., 2007. Evaluation of friction performance of coarse aggregates and Hot-Mix asphalt pavements. Journal of Testing and Evaluation, 35 (6), 1–7.
   Web of Science ®Google Scholar
• Maerz, N.H., 1998. Aggregate sizing and shape determination using digital image processing. Center for aggregates research (ICAR) sixth annual symposium, 19–20 April. St. Louis, Missouri, 195–203.
   Google Scholar
• Mahmoud, E., and Masad, E., 2007. Experimental methods for the evaluation of aggregate resistance to polishing, abrasion and breakage. Journal of Materials in Civil Engineering, 19 (11), 977–985.
   Web of Science ®Google Scholar
• Masad, E., et al., 1999. Internal structure characterization of asphalt concrete using image analysis. Journal of Computing in Civil Engineering, 13 (2), 88–95. doi:10.1061/(asce)0887-3801(1999)13:2(88).
   Web of Science ®Google Scholar
• Masad, E., 2007. Relationship of aggregate texture to asphalt pavement skid resistance using image analysis of aggregate shape. final report for highway IDEA project 114. Washington, DC: Transportation Research Board of the National Academies.
   Google Scholar
• Matuszewski, M., et al., 2016. Influence of structure isotropy of machined surface on the wear process. The International Journal of Advanced Manufacturing Technology, 88 (9-12), 2477–2483. doi:10.1007/s00170-016-8963-z.
   Web of Science ®Google Scholar
• Meegoda, J.N., and Gao, S., 2015. Evaluation of pavement skid resistance using high speed texture measurement. Journal of Traffic and Transportation Engineering (English Edition), 2 (6), 382–390. doi:10.1016/j.jtte.2015.09.001.
   Google Scholar
• Michigan Metrology LLC, 2014. Michigan metrology surface texture parameters glossary. Livonia, MI. Available from: https://www.michmet.com/Texture_parameters.htm.
   Google Scholar
• Moaveni, M., et al., 2014. Use of advanced aggregate imaging systems to evaluate aggregate resistance to breakage, abrasion, and polishing. Transportation Research Record: Transportation Research Board, 2401, 1–10. doi:10.3141/2401-01.
   Google Scholar
• Mustafa, M., et al., 2010. GLCM texture feature reduction for EEG spectrogram image using PCA. 2010 IEEE student conference on research and development (SCOReD), Kuala Lumpur, Malaysia. doi:10.1109/scored.2010.5704047.
   Google Scholar
• Nataadmadja, A.D., et al., 2012. Quantifying aggregate micro-texture with respect to wear-case of New Zealand aggregates. Wear, 332–333, 907–917. doi:10.1016/j.wear.2014.11.028.
   Google Scholar
• Olaniyi, E.O., et al., 2017. Automatic system for grading banana using GLCM texture feature extraction and neural network arbitrations. Journal of Food Process Engineering, 40 (6). doi:10.1111/jfpe.12575.
   Web of Science ®Google Scholar
• Otsu, N., 1979. A threshold selection method from Gray-Level histograms. IEEE Transactions on Systems, Man, and Cybernetics, 9 (1), 62–66.
   Web of Science ®Google Scholar
• Paulus, S., et al., 2014. Limits of active laser triangulation as an instrument for high precision plant imaging. Sensors, 14 (12), 2489–2509. doi:10.3390/s140202489.
   PubMedGoogle Scholar
• Pawlus, P., Reizer, R., and Wieczorowski, M., 2017. Problem of non-measured points in surface texture measurements. Metrology and Measurement Systems, 24 (3), 525–536. doi:10.1515/mms-2017-0046.
   Web of Science ®Google Scholar
• Pradhan, M., 2016. Evaluate the use of Fpga Soc for real time data acquisition and aggregate micro-texture measurement using laser sensors. Arlington, TX, USA: University of Texas at Arlington.
   Google Scholar
• Puccinelli, J., et al., 2014. Long-Term pavement performance warm mix asphalt study. Washinton, DC: Federal Highway Adminstration (FHWA).
   Google Scholar
• Rezaei, A., et al., 2009. Predicting asphalt mixture skid resistance by aggregate characteristics and gradation. Transportation Research Record: Journal of the Transportation Research Board, 2104, 24–33. doi:10.3141/2104-03.
   Web of Science ®Google Scholar
• Roberts, D., and Roberts, F., 2012. Correlation coefficients - MathBitsNotebook(A2 - CCSS Math). Available from: https://mathbitsnotebook.com/Algebra2/Statistics/STCorrelationCoefficients.html.
   Google Scholar
• Sedlaček, M., Gregorčič, P., and Podgornik, B., 2016. Use of the roughness parameters Ssk and Sku to control friction - A method for designing surface texturing. Tribology Transactions, 60 (2), 260–266. doi:10.1080/10402004.2016.1159358.
   Web of Science ®Google Scholar
• Smith, A.M., et al., 2002. Texture based feature extraction: application to burn scar detection in earth observation satellite sensor imagery. International Journal of Remote Sensing, 23 (8), 1733–1739. doi:10.1080/0143116011010610.
   Web of Science ®Google Scholar
• Sthitpattanapongsa, P. and Srinark, T., 2011. An equivalent 3D Otsu’s thresholding method. Advances in image and video technology: 5th pacific Rim symposium. Gwangju, South Korea, 358–369.
   Google Scholar
• Ueckermann, et al., 2015. Calculation of skid resistance from texture measurements. Journal of Traffic and Transportation Engineering, 2 (1), 3–16.
   Google Scholar
• Wojciechowski, L., Majchrowski, R., and Mathia, T.G., 2017. Contribution of roughness parameters in the scuffing performance of metallic surfaces. Industrial Lubrication and Tribology, 69 (4), 507–515. doi:10.1108/ilt-05-2016-0116.
   Web of Science ®Google Scholar
• Yang, G., et al., 2017. Wavelet based macro-texture analysis for pavement friction prediction. KSCE Journal of Civil Engineering, 22 (1), 117–124. doi:10.1007/s12205-017-1165-x.
   Web of Science ®Google Scholar