754
Views
33
CrossRef citations to date
0
Altmetric
Articles

Investigation on the permeability of porous asphalt concrete based on microstructure analysis

, , , &
Pages 1683-1693 | Received 14 Jun 2018, Accepted 21 Dec 2018, Published online: 07 Jan 2019

References

  • Aho, B.D., Vavrik, W.R., and Carpenter, S.H., 2001. Effect of flat and elongated coarse aggregate on field compaction of hot-mix asphalt. Transportation Research Record: Journal of the Transportation Research Board, 1761, 26–31. doi: 10.3141/1761-04
  • Al-Omari, A. and Masad, E., 2004. Three dimensional simulation of fluid flow in X-ray CT images of porous media. International Journal for Numerical and Analytical Methods in Geomechanics, 28, 1327–1360. doi: 10.1002/nag.389
  • Brown, E.R., et al.., 2004. Relationship of air voids, lift thickness, and permeability in hot mix asphalt pavements. NCHRP Report 531.
  • Chen, J., et al.., 2015. Permeability loss of open-graded friction course mixtures due to deformation-related and particle-related clogging: understanding from a laboratory investigation. Journal of Materials in Civil Engineering, 27 (11), 04015023. doi: 10.1061/(ASCE)MT.1943-5533.0001282
  • Chen, J., Tang, T., and Zhang, Y.Q., 2017. Laboratory characterization of directional dependence of permeability for porous asphalt mixtures. Materials and Structures, 50 (215), 1–11. doi: 10.1617/s11527-016-0885-6
  • Coleri, E., et al.., 2013. Clogging evaluation of open graded friction course pavements tested under rainfall and heavy vehicle simulators. Journal of Environmental Management, 129, 164–172. doi: 10.1016/j.jenvman.2013.07.005
  • Cui, L. and Bhattacharya, S., 2017. Choice of aggregates for permeable pavements based on laboratory tests and DEM simulations. International Journal of Pavement Engineering, 18 (2), 160–168. doi: 10.1080/10298436.2015.1053480
  • Fwa, T., Tan, S., and Guwe, Y., 1999. Laboratory evaluation of clogging potential of porous asphalt mixtures. Transportation Research Record: Journal of the Transportation Research Board, 1681, 43–49. doi: 10.3141/1681-06
  • Hamzah, M., et al.., 2013. Laboratory simulation of the clogging behaviour of single-layer and two-layer porous asphalt. Road Materials and Pavement Design, 14 (1), 107–125. doi: 10.1080/14680629.2012.749803
  • Hasan, M.R.M., et al.., 2013. The effects of break point location and nominal maximum aggregate size on porous asphalt properties. Construction and Building Materials, 44, 360–367. doi: 10.1016/j.conbuildmat.2013.02.053
  • Hasan, M.R.M., et al.., 2016. Disruption of air voids continuity based on permeability loss due to mortar creep. Construction and Building Materials, 116, 347–354. doi: 10.1016/j.conbuildmat.2016.04.121
  • Hassan, N.A., et al., 2016. Air voids characterisation and permeability of porous asphalt gradations used in different countries. ARPN Journal of Engineering and Applied Science, 11 (24), 14043–14047.
  • Hassan, N.A., Mahmud, M.Z.H., and Jaya, R.P., 2014. Air void characterisation in porous asphalt using X-ray computed tomography. Advanced Materials Research, 911, 443–448. doi: 10.4028/www.scientific.net/AMR.911.443
  • Jiang, W., Sha, A.M., and Xiao, J.J., 2015. Experimental study on relationships among composition, microscopic void features, and performance of porous asphalt concrete. Journal of Materials in Civil Engineering, 27 (11), 04015028. doi: 10.1061/(ASCE)MT.1943-5533.0001281
  • Jung, S.Y., Lim, S.M., and Lee, S.J., 2012. Investigation of water seepage through porous media using X-ray imaging technique. Journal of Hydrology, 452-453, 83–89. doi: 10.1016/j.jhydrol.2012.05.034
  • Koohmishi, M. and Shafabakhsh, G., 2018. Drainage potential of reservoir course of porous pavement for various particle size distributions of aggregate. Transportation Geotechnics, 16, 63–75. doi: 10.1016/j.trgeo.2018.07.002
  • Kutay, M.E., et al., 2007. Computational and experimental evaluation of hydraulic conductivity anisotropy in hot-mix asphalt. International Journal of Pavement Engineering, 8, 29–43. doi: 10.1080/10298430600819147
  • Kutay, M.E. and Aydilek, A.H., 2007. Dynamic effects on moisture transport in asphalt concrete. Journal of Transportation Engineering, 133, 406–414. doi: 10.1061/(ASCE)0733-947X(2007)133:7(406)
  • Liu, Y.F., et al., 2016. Quantification of aggregate morphologic characteristics with the correlation to uncompacted void content of coarse aggregates in Virginia. Construction and Building Materials, 124, 645–655. doi: 10.1016/j.conbuildmat.2016.06.150
  • Luo, L.F., Lin, H., and Li, S.C., 2010. Quantification of 3-D soil macropore networks in different soil types and land uses using computed tomography. Journal of Hydrology, 393, 53–64. doi: 10.1016/j.jhydrol.2010.03.031
  • Mahmud, M.Z.H., et al., 2017. Microstructural investigation on air void properties of porous asphalt using virtual cut section. Construction and Building Materials, 155, 485–494. doi: 10.1016/j.conbuildmat.2017.08.103
  • Mallick, R.B., et al., 2003. An evaluation of factors affecting permeability of superpave designed pavements. NCAT Report 03-02.
  • Martin, W.M., Putman, Bradley J., and Neptune, A.I.., 2014. Influence of aggregate gradation on clogging characteristics of porous asphalt mixtures. Journal of Materials in Civil Engineering, 26 (7), 04014026. doi: 10.1061/(ASCE)MT.1943-5533.0000975
  • Pezzaniti, D., Beecham, S., and Kandasamy, J., 2009. Influence of clogging on the effective life of permeable pavements. Proceedings of the Institution of Civil Engineers - Water Management, 162 (3), 211–220. doi: 10.1680/wama.2009.00034
  • Poulikakos, L.D., et al., 2013. Time resolved analysis of water drainage in porous asphalt concrete using neutron radiography. Applied Radiation and Isotopes, 77, 5–13. doi: 10.1016/j.apradiso.2013.01.040
  • Ranieri, V., Sansalone, J.J., and Shuler, S., 2010. Relationships among gradation curve, clogging resistance, and pore-based indices of porous asphalt mixes. Road Materials and Pavement Design, 11, 507–525. doi: 10.1080/14680629.2010.9690344
  • Retzer, N.., 2008. Permeability research with the Romus air permeameter. Report to Colorado DOT, Report No. CDOT-2008-5.
  • Robert, A.B. and Michael, B., 2014. Evaluation of surface infiltration testing procedures in permeable pavement systems. Journal of Environmental Engineering, 140 (3), 04014001. doi: 10.1061/(ASCE)EE.1943-7870.0000808
  • Sreeyuth Lal, L.D., et al., 2017. Investigation of gravity-driven drainage and forced convective drying in a macroporous medium using neutron radiography. Transport in Porous Media, 118, 119–142. doi: 10.1007/s11242-017-0850-z
  • Tan, S.A., Fwa, T.F., and Han, C.T.., 2003. Clogging evaluation of permeable bases. Journal of Transportation Engineering, 129 (3), 309–315. doi: 10.1061/(ASCE)0733-947X(2003)129:3(309)
  • Tarefder, R.A. and Ahmad, M., 2015. Evaluating the relationship between permeability and moisture damage of asphalt concrete pavements. Journal of Materials in Civil Engineering, 27 (5), 04014172. doi: 10.1061/(ASCE)MT.1943-5533.0001129
  • Tarefder, R.A. and Ahmad, M., 2017. Evaluation of pore structure and its influence on permeability and moisture damage in asphalt concrete. International Journal of Pavement Engineering, 18 (3), 274–283. doi: 10.1080/10298436.2015.1065995
  • Tarefder, R.A., White, L., and Zaman, M., 2005. Neural network model for asphalt concrete permeability. Journal of Materials in Civil Engineering, 17 (1), 19–27. doi: 10.1061/(ASCE)0899-1561(2005)17:1(19)
  • Umiliaco, A. and Benedetto, A., 2012. Unsteady flow simulation of water drainage in open-graded asphalt mixtures. Procedia - Social and Behavioral Sciences, 53, 346–355. doi: 10.1016/j.sbspro.2012.09.886
  • Valerio, C.A., et al., 2016. Laboratory assessment of the infiltration capacity reduction in clogged porous mixture surfaces. Sustainability, 8 (751), 1–11.
  • Xu, H.N., et al., 2018. Micro-scale moisture distribution and hydrologically active pores in partially saturated asphalt mixtures by X-ray computed tomography. Construction and Building Materials, 160, 653–667. doi: 10.1016/j.conbuildmat.2017.11.107
  • Zhang, J., et al., 2017. Sediment transport and pore clogging of a porous pavement under surface runoff. Road Materials and Pavement Design, 18 (S3), 240–248. doi: 10.1080/14680629.2017.1329878

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.