Engineering and microscopic characteristics of natural rubber latex modified binders incorporating silane additive

References

• Airey, G.D., et al., 2008. The influence of aggregate, filler and bitumen on asphalt mixture moisture damage. Construction and Building Materials, 22 (9), 2015–2024. doi: 10.1016/j.conbuildmat.2007.07.009
   Web of Science ®Google Scholar
• Al-Mansob, R. A., et al., 2014. Physical and rheological properties of epoxidized natural rubber modified bitumens. Construction and Buildin Materials, 63, 242–248. doi: 10.1016/j.conbuildmat.2014.04.026
   Web of Science ®Google Scholar
• Ameri, M., et al., 2018. Moisture susceptibility evaluation of asphalt mixtures containing Evonik, ZycoTherm and hydrated lime. Construction and Building Materials, 165, 958–965. doi: 10.1016/j.conbuildmat.2017.12.113
   Web of Science ®Google Scholar
• American Society for Testing and Materials, 1995. Standard test method for softening point of bitumen (ring-and-ball apparatus) ASTM D36. Conshohocken, PA: ASTM International.
   Google Scholar
• American Society for Testing and Materials, 1997. Standard test method for penetration of bituminous materials ASTM D5. Conshohocken, PA: ASTM International.
   Google Scholar
• American Society for Testing and Materials, 2012. Standard test method for viscosity determination of asphalt at elevated temperatures using a rotational viscometer ASTM D4402. Conshohocken, PA: ASTM International.
   Google Scholar
• Arabani, M., Roshani, H., and Hamedi, G.H, 2012. Estimating moisture sensitivity of warm mix asphalt modified with zycosoil as an antistrip agent using surface free energy method. Journal of Materials in Civil Engineering, 24 (7), 889–897. doi: 10.1061/(ASCE)MT.1943-5533.0000455
   Web of Science ®Google Scholar
• ARRB AG:PT/T122, 2006. Torsional recovery of polymer modified binders. Sydney, NSW, Australia: Australia Road Research Board.
   Google Scholar
• ASTM D2872, 2006. Standard test method for effect of heat and air on moving film of asphalt (rolling thin-film oven test). Annual Books of ASTM Standards, Vol. 4.03. West Conshohocken, PA, USA.
   Google Scholar
• ASTM D7175-08, 2011. Standard test method for determining the rheological properties of asphalt binder using a dynamic shear rheometer. Annual Books of ASTM Standards, Vol. 4.03. West Conshohocken, PA, USA.
   Google Scholar
• Bagampadde, U., and Kiggundu, B.M, 2007. Influence of truckload channelization on stripping in asphalt mixtures. Construction and Building Materials, 21 (8), 1628–1635. doi: 10.1016/j.conbuildmat.2006.06.027
   Web of Science ®Google Scholar
• Baldi-Sevilla, A., et al., 2017. Effect of aggregate– bitumen compatibility on moisture susceptibility of asphalt mixtures. Road Materials and Pavement Design, 18 (2), 318–328. doi: 10.1080/14680629.2017.1304248
   Google Scholar
• Canestrari, F., et al., 2011. Adhesive and cohesive properties of asphalt-aggregate systems subjected to moisture damage. Road Materials and Pavement Design, 11 (1), 11–32.
   Google Scholar
• Chen, X., and Huang, B, 2008. Evaluation of moisture damage in hot mix asphalt using simple performance and Superpave indirect tensile tests. Construction and Building Materials, 22 (9), 1950–1962. doi: 10.1016/j.conbuildmat.2007.07.014
   Web of Science ®Google Scholar
• Cheng, J.C., Shen, J.N., and Xiao, F.P, 2011. Moisture susceptibility of warm-mix asphalt mixtures containing nanosized hydrated lime. Journal of Materials in Civil Engineering, 23 (11), 1552–1559. doi: 10.1061/(ASCE)MT.1943-5533.0000308
   Web of Science ®Google Scholar
• Fallah Tafti, M., et al., 2016. Experimental investigation of the effect of using different aggregate types on WMA mixtures. International Journal of Pavement Research and Technology, Chinese Society of Pavement Engineering, 9 (5), 376–386. doi: 10.1016/j.ijprt.2016.09.006
   Google Scholar
• Fini, E.H., et al., 2011. Chemical characterization of bio-binder from swine manure: sustainable modifier for asphalt binder. Journal of Materials in Civil Engineering, 23 (11), 1506–1513. doi: 10.1061/(ASCE)MT.1943-5533.0000237
   Web of Science ®Google Scholar
• Goh, S. W., Hasan, M. R. M., and You, Z, 2013. Performances evaluation of cecabase ® RT in Warm Mix Asphalt technology. Procedia - Social and Behavioral Sciences, 96 (Cictp), 2782–2790. doi: 10.1016/j.sbspro.2013.08.311
   Google Scholar
• Golchin, B., et al., 2018. Effects of a surfactant-wax based warm additive on high temperature rheological properties of asphalt binders. Construction and Building Materials, 183, 395–407. doi: 10.1016/j.conbuildmat.2018.06.099
   Web of Science ®Google Scholar
• Hasan, M. R. M., et al., 2017b. Quantification of physicochemical properties, activation energy, and temperature susceptibility of foamed asphalt binders. Construction and Building Materials, 153, 557–568. doi: 10.1016/j.conbuildmat.2017.07.123
   Web of Science ®Google Scholar
• Hasan, M. R. M., Goh, S. W., and You, Z, 2013. Comparative study on the properties of WMA mixture using foamed admixture and free water system. Construction and Building Materials, 48, 45–50. doi: 10.1016/j.conbuildmat.2013.06.028
   Web of Science ®Google Scholar
• Hasan, M. R. M, Hamzah, M. O., and Yee, T.S., 2017a. Performance characterizations of asphalt binders and mixtures incorporating Silane Additive ZycoTherm. In: A.I.P conference proceedings1892.
   Google Scholar
• Hasan, M. R. M., and You, Z, 2016. Ethanol based foamed asphalt as potential alternative for low emission asphalt technology. Journal of Traffic and Transportation Engineering, 3 (2), 116–126.
   Google Scholar
• Hesami, S., et al., 2013. Evaluate the mechanism of the effect of hydrated lime on moisture damage of warm mix asphalt. Construction and Building Materials, 47, 935–941. doi: 10.1016/j.conbuildmat.2013.05.079
   Web of Science ®Google Scholar
• Jahromi, S.G, 2009. Estimation of resistance to moisture destruction in asphalt mixtures. Construction and Building Materials, 23 (6), 2324–2331. doi: 10.1016/j.conbuildmat.2008.11.007
   Web of Science ®Google Scholar
• Jamshidi, A, 2013. Rheological properties of asphalt binders performance and sustainability of warm-mix asphalt incorporating sasobit®. Dissertation (PhD). University Sains Malaysia.
   Google Scholar
• Kringos, N., et al., 2008. Modelling of combined physical–mechanical moisture-induced damage in asphaltic mixes: Part 2. Moisture susceptibility parameters. International Journal of Pavement Engineering, 9 (2), 129–151. doi: 10.1080/10298430701792227
   Google Scholar
• Mehrara, A., and Khodaii, A, 2013. A review of state of the art on stripping phenomenon in asphalt concrete. Construction and Building Materials, 38, 423–442. doi: 10.1016/j.conbuildmat.2012.08.033
   Web of Science ®Google Scholar
• Mirzababaei, P, 2016. Effect of ZycoTherm on moisture susceptibility of Warm Mix Asphalt mixtures prepared with different aggregate types and gradations. Construction and Building Materials, 116, 403–412. doi: 10.1016/j.conbuildmat.2016.04.143
   Web of Science ®Google Scholar
• Peralta, J, et al., 2012. Bio-renewable asphalt modifiers and asphalt substitutes. In: K. Gopalakrishnan, J. Van Leeuwen, and R.C. Brown. ed. Sustainable bioenergy and bioproducts. London: Springer, 89–115.
   Google Scholar
• Poulikakos, L. D., and Partl, M. N, 2010. Investigation of porous asphalt microstructure using optical and electron microscopy. Journal of Microscopy, 240 (2), 145–154. doi: 10.1111/j.1365-2818.2010.03388.x
   PubMed Web of Science ®Google Scholar
• Ramm, A., et al., 2016. Optical characterization of temperature- and composition-dependent microstructure in asphalt binders. Journal of Microscopy, 262 (3), 216–225. doi: 10.1111/jmi.12353
   PubMed Web of Science ®Google Scholar
• Shafabakhsh, G. H., Faramarzi, M., and Sadeghnejad, M, 2015. Use of Surface free Energy method to evaluate the moisture susceptibility of sulfur extended asphalts modified with antistripping agents. Construction and Building Materials, 98, 456–464. doi: 10.1016/j.conbuildmat.2015.08.123
   Web of Science ®Google Scholar
• Shafabakhsh, G. H., Sadeghnejad, M., and Sajed, Y, 2014. Case studies in rutting performance of HMA modified with waste rubber powder. Case Studies in Construction Materials, 1, 69–76. doi: 10.1016/j.cscm.2014.04.005
   Google Scholar
• Shafii, M., Ahmad, J., and Shaffie, E, 2013. Physical properties of asphalt emulsion modified with natural rubber latex. World Journal Engineering, 10 (2), 159–164. doi: 10.1260/1708-5284.10.2.159
   Google Scholar
• Wen, Y., et al., 2017. The use of natural rubber latex as a renewable and sustainable modifier of asphalt binder. International Journal of Pavement Engineering, XX (8436), 1–13.
   Google Scholar
• Xiao, F., et al., 2010. Influence of antistripping additives on moisture susceptibility of warm mix asphalt mixtures. Journal of Material in Civil Engineering, 22, 1047–1055. doi: 10.1061/(ASCE)MT.1943-5533.0000111
   Web of Science ®Google Scholar
• Yan, K., et al., 2015. Laboratory investigation of the characteristics of SMA mixtures under freeze-thaw cycles. Cold Regions Science and Technology, 119, 68–74. doi: 10.1016/j.coldregions.2015.07.007
   Web of Science ®Google Scholar
• Yang, X., et al., 2017. Environmental and mechanical performance of crumb rubber modified warm mix asphalt using Evotherm. Journal of Cleaner Production, 159, 346–358. doi: 10.1016/j.jclepro.2017.04.168
   Web of Science ®Google Scholar
• You, Z., et al., 2011. Evaluation of low-temperature binder properties of warm-mix asphalt, extracted and recovered rap and ras, and bioasphalt. Journal of Materials in Civil Engineering, 23 (11), 1569–1574. doi: 10.1061/(ASCE)MT.1943-5533.0000295
   Web of Science ®Google Scholar
• Yu, H., et al., 2017. Optimization of preparation procedure of liquid warm mix additive modified asphalt rubbe. Journal of Cleaner Production, 141, 336–345. doi: 10.1016/j.jclepro.2016.09.043
   Web of Science ®Google Scholar
• Ziari, H., Naghavi, M., and Imaninasab, R, 2018. Performance evaluation of rubberised asphalt mixes containing WMA additives. International Journal of Pavement Engineering, 19 (7), 623–629. doi: 10.1080/10298436.2016.1199874
   Web of Science ®Google Scholar
• Zydex, 2014. ZYCOTHERM Material Safety Data Sheet. Gotri, Vadodara: Zydex, Editor.
   Google Scholar