Method to determine the dosage of bituminous tack coat in function of the texture of milled asphalt layers to be overlaid

References

• The Asphalt Contractor, 2011. How micromilling is saving states money on asphalt road repairs. The Asphalt Contractor Magazine. Available from: http://www.freeconstructionmagazines.com/asphalt-contractor-magazine/architecture-magazines/.
   Google Scholar
• Bello, M., 2016. Notes on training on prediction and goodness of fit, Software-Shop Training, Colombia.
   Google Scholar
• Berenguer, J.M., Calvo, C., Molina, J., Gomariz, R., and Peña, J.L., 2017. El ensayo de adherencia de capas de firme según NLT-328/08. Estudio comparativo de los resultados obtenidos con los dispositivos A y B, XIX Ibero-Latin American Asphalt Congress (CILA), Medellín, Colombia.
   Google Scholar
• Bonfim, V., 2008. Fresado de pavimentos asfálticos, Editorial Exceçao, first edition, Brazil.
   Google Scholar
• Brown, S.F., and Brunton, J.M., 1984. The influence of bonding between bituminous layers. Highways Transportation, 31 (5), 16–17.
   Google Scholar
• Bussard, M., 2014. Milling & micro milling. P.R. Systems Inc. Available from: https://www.google.es/url?sa=t&rct=j&q=&esrc=s&source=web&cd=1&ved=2ahUKEwjPge2RprngAhUDQhoKHQQCBvMQFjAAegQICRAC&url=http%3A%2F%2Fwww.asphaltwa.com%2Fwpcontent%2Fuploads%2F2015%2F01%2FMilling-Micro-Milling-PR-Systems-HPpc.pptx&usg=AOvVaw0-uai9nGbuGVAMFABJesK3.
   Google Scholar
• D´andrea, A., et al., 2013. Interfase roughness parameters and shear strength, Modern Applied Science (ISSN 1913-1844), Canadian Center of Science and Education, vol 7, n 10, Canada.
   Google Scholar
• Delbono, H.L., 2014. Estudio de Grillas Poliméricas en Sistemas Anti-reflejo de Fisuras bajo Solicitaciones Dinámicas. Doctoral Thesis in Materials Engineering, National Technological University, La Plata Regional Faculty, La Plata, Argentina.
   Google Scholar
• Diakhaté, M., et al., 2011. Experimental investigation of tack coat fatigue performance: Towards an improved lifetime assessment of pavement structure interfaces. Construction and Building Materials, 25 (2), 1123–1133. doi: 10.1016/j.conbuildmat.2010.06.064
   Web of Science ®Google Scholar
• DNV, 2017. Pliego de especificaciones técnicas generales para concretos asfálticos en caliente y semicaliente del tipo densos, National Highway Administration (DNV), Argentina.
   Google Scholar
• EICAM, 1998. Curso de actualización de diseño estructural de caminos (método AASHTO93). San Juan: National University of San Juan, Argentina.
   Google Scholar
• Espinoza, M., 2015. Capas de refuerzo con hormigón adheridas como alternativa para la rehabilitación de pavimentos asfálticos, Infraestructura Vial Magazine (ISSN 1409-4045), University of Costa Rica, volume 17, number 30, december, Costa Rica.
   Google Scholar
• Gierhart, D. and Johnson, D.R., 2018. Tack coat specifications, materials, and Construction Practices. NCHRP Synthesis of Highway Practice, 516, 1–120.
   Google Scholar
• Giovanon, O., and Buono, F., 2008. Riego de liga su importancia estructural y análisis tensional, XXXV Asphalt Meeting, Comisión Permanente del Asfalto, Rosario, Argentina.
   Google Scholar
• Giovanon, O., and Pagola, M., 2012. Modelo mecanicista empírico para análisis de pavimentos flexibles desarrollado en Argentina, Carreteras Magazine, Asociación Argentina de Carreteras, number 208, december, pp. 76–86, Argentina.
   Google Scholar
• IRAM, 1997. IRAM Standard 1850: Agregados. Método de determinación de la profundidad de la macrotextura superficial de un pavimento mediante el círculo de arena, Argentine Institute for Standardization and Certification, Argentina.
   Google Scholar
• Martínez-Echevarría, M.J., 2012. Estudio de compactación en laboratorio para mezclas recicladas en frío con emulsión bituminosa. Doctoral Thesis. Granada: University of Granada.
   Google Scholar
• Miller, J., and Bellinger, W., 2003. Distress identification manual for the long-term pavement performance program, fourth revised edition. Report No. FHWA-RD-03-031, Washington DC, USA.
   Google Scholar
• Mohammad, L.N., 2012. Optimization of tack coat for HMA placement. NCHRP Report 712. Transportation Research Board.
   Google Scholar
• Montetrusque, G., et al., 2015. Avaliação da adherencia de geogrelhas entre camadas asfálticas, Memories of the XVIII Ibero-Latin American Asphalt Congress (CILA), ISBN 978-950-630-031-9, Bariloche, Argentina.
   Google Scholar
• Muench, S.T., and Moomaw, T., 2008. De-bonding of hot mix asphalt pavements in Washington state: an initial investigation, TNW 2008-10, Transportation Northwest (TransNow). Seattle: University of Washington.
   Google Scholar
• NCHRP, 2004. Guide for mechanistic-empirical design of new and rehabilitated pavement structures. Champaign, IL: National Research Board, 1-37A team.
   Google Scholar
• Raposeiras, A.C., et al., 2013. New procedure to control the tack coat applied between bituminous pavement layers. Construction and Building Materials, 44, 228–235. doi: 10.1016/j.conbuildmat.2013.03.004
   Web of Science ®Google Scholar
• Ricci, L.A., 2011. Evaluación de adherencia entre capas asfálticas con intercapa de geosintético. Thesis of Master in Transportation Engineering - Road Guidance, University of Buenos Aires, Argentina.
   Google Scholar
• Rivera, J.J., et al., 2017. Metodología para estimación de dotación de riego de liga en refuerzos asfálticos sobre superficies fresadas. XIX Ibero-Latin American Asphalt Congress (CILA), Medellín, Colombia.
   Google Scholar
• Romanoschi, S.A., 1999. Characterization of pavement layer interfaces. Baton Rouge, LA: Louisiana State University and Agricultural & Mechanical College.
   Google Scholar
• Santagata, F.A., et al., 2009. Statistical investigation of two different interlayer shear test methods. Materials and Structures, 42 (6), 705–714. doi: 10.1617/s11527-008-9414-6
   Web of Science ®Google Scholar
• Tosticarelli, J.R., 2002. Ensayos para evaluar la adherencia entre capas asfálticas: Memories of XXXll asphalt Meeting. Tafí del Valle: Comisión Permanente del Asfalto.
   Google Scholar
• Uzan, J., Livneh, M., and Eshed, Y., 1978. Investigation of adhesion properties between asphalt concrete layers., Proc. Assoc. Asphalt Paving Technologists, St. Paul, Minn, 47, 495-521, USA.
   Google Scholar
• Wirtgen, 2013. Wirtgen cold milling manual, Technology and application. Windhagen: Wirtgen GmbH.
   Google Scholar
• Wirtgen, 2015. El mundo de las fresadoras en frío de Wirtgen. Windhagen: Wirtgen Group Company.
   Google Scholar
• Yaacob, H., et al., 2014. Information for the Malaysian asphalt industry towards better pavement interlayer bonding. Sains Malaysiana, 43 (3), 467–474.
   Web of Science ®Google Scholar