Performance of epoxy asphalt binder containing warm-mix asphalt additive

References

• Abraham, J., et al., 2002. Asphalt flow improvers as’ intelligent fillers’ for hot asphalts-a new chapter in asphalt technology. Journal of Applied Asphalt Binder Technology, 2 (1), 36–49.
   Google Scholar
• Akisetty, C., et al., 2011. Estimating correlations between rheological and engineering properties of rubberized asphalt concrete mixtures containing warm mix asphalt additive. Construction and Building Materials, 25 (2), 950–956. doi: 10.1016/j.conbuildmat.2010.06.087
   Web of Science ®Google Scholar
• Akisetty, C. K., Lee, S.-J., and Amirkhanian, S. N, 2010. Laboratory investigation of the influence of warm asphalt additives on long-term performance properties of CRM binders. International Journal of Pavement Engineering, 11 (2), 153–160. doi: 10.1080/10298430903197225
   Web of Science ®Google Scholar
• Anon., 2003. ASTM Standard D638. Standard test method for tensile properties of plastics. West Conshohocken, PA: ASTM International.
   Google Scholar
• Anon., 2014. GB/T 30598. general specifications of epoxy asphalt materials for paving roads and bridges. Beijing: Standards Press of China.
   Google Scholar
• Apostolidis, P., et al., 2018a. Chemo-rheological study of hardening of epoxy modified bituminous binders with the finite element method. Transportation Research Record, 2672 (28), 190–199. doi: 10.1177/0361198118781377
   Web of Science ®Google Scholar
• Apostolidis, P, et al., 2018b. Epoxy modified bitumen: chemical hardening and its interpretation. In: E.Masad, A. Bhasin, T. Scarpas, I. Menapace, and A. Kumar, eds. International conference on advances in materials and pavement performance prediction. TRB.
   Google Scholar
• Asphalt Institute, 2003. Performance graded asphalt binder specification and testing superpave. Lexington, KY: Asphalt Institute.
   Google Scholar
• Capitao, S. D., Picado-Santos, L. G., and Martinho, F, 2012. Pavement engineering materials: review on the use of warm-mix asphalt. Construction and Building Materials, 36, 1016–1024. doi: 10.1016/j.conbuildmat.2012.06.038
   Web of Science ®Google Scholar
• Chen, R., et al., 2018. Halogen-free flame retarded cold-mix epoxy asphalt binders: rheological, thermal and mechanical characterization. Construction and Building Materials, 186, 863–870. doi: 10.1016/j.conbuildmat.2018.08.018
   Web of Science ®Google Scholar
• Chen, C., Chen, Z., and Zhai, H, 2008. Determination of optimum reserved time for epoxy asphalt concrete pavement. Highway, 6, 183–186.
   Google Scholar
• Chen, L., Qian, Z., and Lu, Q, 2014. Crack initiation and propagation in epoxy asphalt concrete in the three-point bending test. Road Materials and Pavement Design, 15 (3), 507–520. doi: 10.1080/14680629.2014.908132
   Web of Science ®Google Scholar
• D'Angelo, J. A., et al., 2008. Warm-mix asphalt: European practice, Federal Highway Administration, FHWA-PL-08-007.
   Google Scholar
• Edwards, Y., Tasdemir, Y., and Isacsson, U, 2006. Rheological effects of commercial waxes and polyphosphoric acid in bitumen 160/220—low temperature performance. Fuel, 85 (7–8), 989–997. doi: 10.1016/j.fuel.2005.09.014
   Web of Science ®Google Scholar
• Forum, International Transport, 2017. Long-life surfacings for roads: field test results. Paris: OECD.
   Google Scholar
• Geng, H., Li, L., and Han, H, 2016. Viscosity criteria and methodology for estimating the optimum compaction temperatures of polymer modified asphalt binders in hot mix asphalt design. Construction and Building Materials, 128, 308–314. doi: 10.1016/j.conbuildmat.2016.10.093
   Web of Science ®Google Scholar
• Gong, J., et al., 2019. Performance evaluation of warm mix asphalt additive modified epoxy asphalt rubbers. Construction and Building Materials, 204, 288–295. doi: 10.1016/j.conbuildmat.2019.01.197
   Web of Science ®Google Scholar
• Hameed, N., et al., 2007. Morphology, dynamic mechanical and thermal studies on poly(styrene-co-acrylonitrile) modified epoxy resin/glass fibre composites. Composites Part A: Applied Science and Manufacturing, 38 (12), 2422–2432. doi: 10.1016/j.compositesa.2007.08.009
   Web of Science ®Google Scholar
• Herrington, P., and Alabaster, D, 2008. Epoxy modified open-graded porous asphalt. Road Materials and Pavement Design, 9 (3), 481–498. doi: 10.1080/14680629.2008.9690129
   Web of Science ®Google Scholar
• Hicks, R., Dussek, I., and Seim, C, 2000. Asphalt surfaces on steel bridge decks. Transportation Research Record: Journal of the Transportation Research Board, 1740, 135–142. doi: 10.3141/1740-17
   Google Scholar
• Huang, W., et al., 2003. Epoxy asphalt concrete paving on the deck of long-span steel bridges. Chinese Science Bulletin, 48 (21), 2391–2394. doi: 10.1360/02ww0123
   Web of Science ®Google Scholar
• Huang, M., Wen, X., and Wang, L, 2017. Influence of foaming effect, operation time and health preserving properties of foam epoxy asphalt mixtures. Construction and Building Materials, 151, 931–938. doi: 10.1016/j.conbuildmat.2017.06.083
   Web of Science ®Google Scholar
• Hurley, G. C. and Prowell, B. D, 2005. Evaluation of Sasobit for use in warm mix asphalt. NCAT Report, 5 (6), 1–27.
   Google Scholar
• Hurley, G. C., and Prowell, B. D, 2006. Evaluation of potential processes for use in warm mix asphalt. Journal of the Association of Asphalt Paving Technologists: From the Proceedings of the Technical Sessions, 75, 41–90.
   Google Scholar
• Jamshidi, A., Hamzah, M. O., and You, Z, 2013. Performance of warm mix asphalt containing Sasobit®: state-of-the-art. Construction and Building Materials, 38, 530–553. doi: 10.1016/j.conbuildmat.2012.08.015
   Web of Science ®Google Scholar
• Jiang, Y., et al., 2018. Microstructures, thermal and mechanical properties of epoxy asphalt binder modified by SBS containing various styrene-butadiene structures. Materials and Structures, 51 (4), 86. doi: 10.1617/s11527-018-1217-9
   Web of Science ®Google Scholar
• Jin, H., et al., 2014. Thermal, mechanical, and morphological properties of soybean oil-based polyurethane/epoxy resin interpenetrating polymer networks (IPNs). Journal of Thermal Analysis and Calorimetry, 117 (2), 773–781. doi: 10.1007/s10973-014-3849-5
   Web of Science ®Google Scholar
• Kang, Y., et al., 2015. Rheological behaviors of epoxy asphalt binder in comparison of base asphalt binder and SBS modified asphalt binder. Construction and Building Materials, 76, 343–350. doi: 10.1016/j.conbuildmat.2014.12.020
   Web of Science ®Google Scholar
• Kang, Y., et al., 2016. Rubber-like quasi-thermosetting polyetheramine-cured epoxy asphalt composites capable of being opened to traffic immediately. Scientific Reports, 6, 18882. doi: 10.1038/srep18882
   PubMed Web of Science ®Google Scholar
• Kheradmand, B., et al., 2014. An overview of the emerging warm mix asphalt technology. International Journal of Pavement Engineering, 15 (1), 79–94. doi: 10.1080/10298436.2013.839791
   Web of Science ®Google Scholar
• Lei, Z., Bahia, H., and Yi-qiu, T, 2015. Effect of bio-based and refined waste oil modifiers on low temperature performance of asphalt binders. Construction and Building Materials, 86, 95–100. doi: 10.1016/j.conbuildmat.2015.03.106
   Web of Science ®Google Scholar
• Liu, Y., et al., 2017b. Laboratory investigation of the properties of epoxy asphalt rubber (EAR). Materials and Structures, 50 (5), 219. doi: 10.1617/s11527-017-1089-4
   Web of Science ®Google Scholar
• Liu, Y., et al., 2017c. Ethylene vinyl acetate copolymer modified epoxy asphalt binders: phase separation evolution and mechanical properties. Construction and Building Materials, 137, 55–65. doi: 10.1016/j.conbuildmat.2017.01.081
   Web of Science ®Google Scholar
• Liu, Y., et al., 2018. Investigation of secondary phase separation and mechanical properties of epoxy SBS-modified asphalts. Construction and Building Materials, 165, 163–172. doi: 10.1016/j.conbuildmat.2018.01.032
   Web of Science ®Google Scholar
• Liu, J., and Li, P, 2012. Low temperature performance of sasobit-modified warm-mix asphalt. Journal of Materials in Civil Engineering, 24 (1), 57–63. doi: 10.1061/(ASCE)MT.1943-5533.0000347
   Web of Science ®Google Scholar
• Liu, K., Lv, Q., and Hua, J, 2017a. Study on damping properties of HVBR/EVM blends prepared by in situ polymerization. Polymer Testing, 60, 321–325. doi: 10.1016/j.polymertesting.2017.02.026
   Web of Science ®Google Scholar
• Lu, Q., and Bors, J, 2015. Alternate uses of epoxy asphalt on bridge decks and roadways. Construction and Building Materials, 78, 18–25. doi: 10.1016/j.conbuildmat.2014.12.125
   Web of Science ®Google Scholar
• Lu, X., Isacsson, U., and Ekblad, J, 1999. Rheological properties of SEBS, EVA and EBA polymer modified bitumens. Materials and Structures, 32 (2), 131–139. doi: 10.1007/BF02479440
   Web of Science ®Google Scholar
• Luo, S., et al., 2017. Laboratory investigation and numerical simulation of the rutting performance of double-layer surfacing structure for steel bridge decks. Construction and Building Materials, 144, 178–187. doi: 10.1016/j.conbuildmat.2017.03.172
   Web of Science ®Google Scholar
• Luo, S., Lu, Q., and Qian, Z, 2015. Performance evaluation of epoxy modified open-graded porous asphalt concrete. Construction and Building Materials, 76, 97–102. doi: 10.1016/j.conbuildmat.2014.11.057
   Web of Science ®Google Scholar
• Menard, H. P, 2008. Dynamic mechanical analysis: a practical introduction. Boca Raton: CRC Press.
   Google Scholar
• Merusi, F., Filippi, S., and Polacco, G, 2017. Effect of synthetic and functionalized waxes on bituminous binders: from the glassy state to the intermediate viscoelastic domain. Construction and Building Materials, 136, 541–555. doi: 10.1016/j.conbuildmat.2017.01.062
   Web of Science ®Google Scholar
• Mousavi, S. M., et al., 2017. Modification of phenol novolac epoxy resin and unsaturated polyester using sasobit and silica nanoparticles. Polymers From Renewable Resources, 8 (3), 117–132. doi: 10.1177/204124791700800303
   Google Scholar
• Nakanishi, H., Takei, S., and Kasugai, N. Strength generation of epoxy asphalt mixture. ed. 3rd China-Japan workshop on pavement technologies, Nanjing, China, 2005.
   Google Scholar
• Nazzal, M. D., et al., 2015. Using atomic force microscopy to evaluate the nanostructure and nanomechanics of warm mix asphalt. Journal of Materials in Civil Engineering, 27 (10), 04015005. doi: 10.1061/(ASCE)MT.1943-5533.0001254
   Web of Science ®Google Scholar
• Petrie, E, 2006. Epoxy adhesives formulations. New York: McGraw-Hill.
   Google Scholar
• Planche, J. P., et al., 1998. Using thermal analysis methods to better understand asphalt rheology. Thermochimica Acta, 324 (1), 223–227. doi: 10.1016/S0040-6031(98)00539-5
   Web of Science ®Google Scholar
• Prowell, B. D., and Hurley, G. C, 2012. Warm-mix asphalt: best practices. 3rd ed. Lanham, MD: National Asphalt Pavement Association.
   Google Scholar
• Qin, Q., et al., 2014. Morphology, thermal analysis and rheology of Sasobit modified warm mix asphalt binders. Fuel, 115, 416–425. doi: 10.1016/j.fuel.2013.07.033
   Web of Science ®Google Scholar
• Si, J., et al., 2018. Comparative analysis of cold-mixed epoxy and epoxy SBS-modified asphalts: curing rheology, thermal, and mechanical properties. Construction and Building Materials, 176, 165–171. doi: 10.1016/j.conbuildmat.2018.05.035
   Web of Science ®Google Scholar
• Soenen, H., et al., 2014. Laboratory investigation of bitumen based on round robin DSC and AFM tests. Materials and Structures, 47 (7), 1205–1220. doi: 10.1617/s11527-013-0123-4
   Web of Science ®Google Scholar
• Sun, Y., et al., 2015. Thermal, mechanical properties, and low-temperature performance of fibrous nanoclay-reinforced epoxy asphalt composites and their concretes. Journal of Applied Polymer Science, 132 (12), 41694.
   Web of Science ®Google Scholar
• Sun, Y., et al., 2016a. Organic montmorillonite reinforced epoxy mortar binders. Construction and Building Materials, 107, 378–384. doi: 10.1016/j.conbuildmat.2016.01.012
   Web of Science ®Google Scholar
• Sun, Y., et al., 2016b. Comparative studies of domestic epoxy asphalt binders. Journal of Nanjing University (Nature Sciences), 52 (2), 213–220.
   Google Scholar
• Sun, Y., et al., 2018a. Viscous, damping and mechanical properties of epoxy asphalt adhesives containing different penetration grade asphalts. Journal of Applied Polymer Science, 47027.
   Google Scholar
• Sun, Y., et al., 2018b. Thermal and mechanical properties of natural fibrous nanoclay reinforced epoxy asphalt adhesives. International Journal of Adhesion and Adhesives, 85, 308–314. doi: 10.1016/j.ijadhadh.2018.07.005
   Web of Science ®Google Scholar
• Wang, Y. T., et al., 2012. Carboxyl-terminated butadiene-acrylonitrile-toughened epoxy/carboxyl-modified carbon nanotube nanocomposites: thermal and mechanical properties. Express Polymer Letters, 6 (9), 719–728. doi: 10.3144/expresspolymlett.2012.77
   Web of Science ®Google Scholar
• Widyatmoko, D., et al. 2006. Curing characteristics and the performance of epoxy asphalts. ed. International conference on asphalt pavements, Quebec, Canada.
   Google Scholar
• Wu, J. P., Herrington, P. R., and Alabaster, D, 2017. Long-term durability of epoxy-modified open-graded porous asphalt wearing course. International Journal of Pavement Engineering, doi:10.1080/10298436.2017.1366764.
   Web of Science ®Google Scholar
• Xiao, Y., et al., 2011. Characteristics of two-component epoxy modified bitumen. Materials and Structures, 44 (3), 611–622. doi: 10.1617/s11527-010-9652-2
   Web of Science ®Google Scholar
• Xu, K., et al., 2016. Organomontmorillonite-modified soybean oil-based polyurethane/epoxy resin interpenetrating polymer networks (IPNs). Journal of Thermal Analysis and Calorimetry, 126 (3), 1253–1260. doi: 10.1007/s10973-016-5795-x
   Web of Science ®Google Scholar
• Yin, H., et al., 2014. Thermal, damping, and mechanical properties of thermosetting epoxy-modified asphalts. Journal of Thermal Analysis and Calorimetry, 115 (2), 1073–1080. doi: 10.1007/s10973-013-3449-9
   Web of Science ®Google Scholar
• Yin, H., et al., 2015. Performance of hot mix epoxy asphalt binder and its concrete. Materials and Structures, 48 (11), 3825–3835. doi: 10.1617/s11527-014-0442-0
   Web of Science ®Google Scholar
• Yu, X., et al., 2016. Rheological and microstructural properties of foamed epoxy asphalt. Construction and Building Materials, 114, 215–222. doi: 10.1016/j.conbuildmat.2016.03.179
   Web of Science ®Google Scholar
• Zhang, J., et al., 2014a. Effects of amino- functionalized carbon nanotubes on the properties of amine- terminated butadiene- acrylonitrile rubber- toughened epoxy resins. Journal of Applied Polymer Science, 131 (13), 40472.
   Web of Science ®Google Scholar
• Zhang, Y., et al., 2014b. Flame retardancy, thermal, and mechanical properties of mixed flame retardant modified epoxy asphalt binders. Construction and Building Materials, 68, 62–67. doi: 10.1016/j.conbuildmat.2014.06.028
   Web of Science ®Google Scholar
• Zhang, J., et al., 2015a. Viscosity-temperature characteristics of warm mix asphalt binder with Sasobit®. Construction and Building Materials, 78, 34–39. doi: 10.1016/j.conbuildmat.2014.12.123
   Web of Science ®Google Scholar
• Zhang, Y., et al., 2015b. Brucite modified epoxy mortar binders: flame retardancy, thermal and mechanical characterization. Construction and Building Materials, 93, 1089–1096. doi: 10.1016/j.conbuildmat.2015.05.037
   Web of Science ®Google Scholar
• Ziari, H., Naghavi, M., and Imaninasab, R, 2018. Performance evaluation of rubberised asphalt mixes containing WMA additives. International Journal of Pavement Engineering, 19 (7), 623–629. doi: 10.1080/10298436.2016.1199874
   Web of Science ®Google Scholar