Moisture susceptibility of hydrated lime modified mastics using adhesion test methods and surface free energy techniques

References

• Adamson, A.W. and Gast, A.P., 1997. Physical chemistry of surfaces. 6th ed. New York: John Wiley and Sons, Inc.
   Google Scholar
• Airey, G.D., et al., 2008. The influence of aggregate, filler and bitumen on asphalt mixture moisture damage. Construction and Building Materials, 22 (9), 2015–2024. doi: 10.1016/j.conbuildmat.2007.07.009
   Web of Science ®Google Scholar
• Airey, G.D. and Choi, Y-K., 2002. State of the art report on moisture sensitivity test methods for bituminous pavement materials. International Journal of Road Materials and Pavement Design, 3 (4), 355–372. doi: 10.1080/14680629.2002.9689930
   Google Scholar
• Apeagyei, A.K., Grenfell, J.R.A., and Airey, G.D., 2014. Moisture-induced strength degradation of aggregate-asphalt mastic bonds. Road Materials and Pavement Design, 15 (S1), 239–262. doi: 10.1080/14680629.2014.927951
   Web of Science ®Google Scholar
• Bhasin, A., et al., 2006. Limits on adhesive bond energy for improved resistance of hot-mix asphalt to moisture damage. Transportation Research Record: Journal of the Transportation Research Board, 1970, 2–13. doi: 10.1177/0361198106197000101
   Google Scholar
• Bhasin, A., 2007. Development of methods to quantify bitumen-aggregate adhesion and loss of adhesion due to water. College Station, Texas, USA: Texas A&M University.
   Google Scholar
• Bhasin, A., and Little, D.N., 2007. Charactization of aggregate surface energy using the universal sorption device. Journal of Materials in Civil Engineering, 19, 634–641. doi: 10.1061/(ASCE)0899-1561(2007)19:8(634)
   Web of Science ®Google Scholar
• Blazek, J., et al., 2000. Effect of hydrated lime addition on properties of asphalt. Petroleum and Coal, 42 (1), 41–45.
   Google Scholar
• BS EN 12697-11, 2012. Bituminous mixtures – test methods for hot mix asphalt – part 11: determination of the affinity between aggregate and bitumen. London: BSI.
   Google Scholar
• Cheng, D., et al., 2002. Use of surface free energy of asphalt-aggregate system to predict moisture damage potential. Journal of the Association of Asphalt Paving Technologists, 71, 59–88.
   Google Scholar
• Dony, A., et al., 2012. “Effect of hydrated lime on the resistance of asphalt mixtures to winter-related damage: moisture, freeze-thaw and deicing salts. In: Proceedings of 5th Eurasphalt and Eurobitume conference.
   Google Scholar
• Faheem, A., et al., 2011. Test methods and specification criteria for mineral filler used in HMA. Final Report, 9-45.
   Google Scholar
• Good, R.J., 1966. Intermolecular and interatomic forces. In: R.L. Patrick, ed., Treatsie on adhesion and adhesives, volume 1: theory. New York: Marcel Dekker, Inc., pp. 10–65.
   Google Scholar
• Grenfell, J.R.A., et al., 2012. Optimising the moisture durability SATS conditioning parameters for universal asphalt mixture application. International Journal of Pavement Engineering, 13 (5), 433–450. doi: 10.1080/10298436.2012.655740
   Web of Science ®Google Scholar
• Grenfell, J.R.A., et al., 2014. Assessing asphalt mixture moisture susceptibility through intrinsic adhesion, bitumen stripping and mechanical damage. Road Materials and Pavement Design, 15 (1), 131–152. doi: 10.1080/14680629.2013.863162
   Web of Science ®Google Scholar
• Guo, M., Tan, Y., and Zhou, S., 2014. Multiscale test research on interfacial adhesion property of cold mix asphalt. Construction and Building Materials, 68, 769–776. doi: 10.1016/j.conbuildmat.2014.06.031
   Web of Science ®Google Scholar
• Hesami, S., et al., 2013. Evaluate the mechanism of the effect of hydrated lime on moisture damage of warm mix asphalt. Construction and Building Materials, 47, 935–941. doi: 10.1016/j.conbuildmat.2013.05.079
   Web of Science ®Google Scholar
• Hicks, R., and Scholz, T., 2003. Life cycle costs for lime in hot mix asphalt, volume 3. Arlington, VA: National Lime Association.
   Google Scholar
• Howson, J., et al., 2012. Relationship between bond energy and total work of fracture for asphalt binder-aggregate systems. Road Materials and Pavement Design, 13 (sup1), 281–303. doi: 10.1080/14680629.2012.657094
   Web of Science ®Google Scholar
• Kakar, M.R., et al., 2016. Surface free energy and moisture susceptibility evaluation of asphalt binders modified with surfactant-based chemical additive. Journal of Cleaner Production, 112, 2342–2353. doi: 10.1016/j.jclepro.2015.10.101
   Web of Science ®Google Scholar
• Kandhal, P. and Rickards, I., 2001. Premature failure of asphalt overlays from stripping: case histories. Asphalt Paving Technology, 70, 301–351.
   Google Scholar
• Kanitpong, K. and Bahia, H.U., 2003. Role of adhesion and thin film tackiness of asphalt binders in moisture damage of HMA. Asphalt Paving Technology, 72, 201–241.
   Google Scholar
• Kim, Y.-R., et al., 2008. Evaluation of moisture damage mechanisms and effects of hydrated lime in asphalt mixtures through measurements of mixture component properties and performance testing. Journal of Materials in Civil Engineering, 20 (10), 659–667. doi: 10.1061/(ASCE)0899-1561(2008)20:10(659)
   Web of Science ®Google Scholar
• Kim, Y.R., 2009. Modelling of asphalt concrete. Reston, Virginia, USA: McGraw-Hill Construction, ASCE Press.
   Google Scholar
• Lesueur, D., Petit, J., and Ritter, H.J., 2013. The mechanisms of hydrated lime modification of asphalt mixtures: a state-of-the-art review. Road Materials and Pavement Design, 14 (1), 1–16. doi: 10.1080/14680629.2012.743669
   Web of Science ®Google Scholar
• Little, D.N. and Bhasin, A., 2006. Using surface energy measurements to select materials for asphalt pavement. National cooperative highways research program. Washington DC: Transportation Research Board, Final Report for NCHRP 9-37.
   Google Scholar
• Liu, Y., et al., 2014. Examination of moisture sensitivity of aggregate-bitumen bonding strength using loose asphalt mixture and physico-chemical surface energy property tests. International Journal of Pavement Engineering, 15 (7), 657–670. doi: 10.1080/10298436.2013.855312
   Web of Science ®Google Scholar
• Masad, E.A., et al., 2006. Characterization of HMA moisture damage using surface energy and fracture properties. Journal of the Association of Asphalt Paving Technologists, 75, 713–754.
   Google Scholar
• Miller, J.S., and Bellinger, W.Y., 2003. Distress identification manual for the long-term pavement performance program. McLean, VA: FHWA, Office of Infrastructure Research and Development, Publication FHWA-RD-03-031.
   Google Scholar
• Nejad, M.F., Hamedi, G.H., and Azarhoosh, A.R., 2013. Use of surface free energy method to evaluate effect of hydrate lime on moisture damage in hot-mix asphalt. Journal of Materials in Civil Engineering, 25 (8), 1119–1126. doi: 10.1061/(ASCE)MT.1943-5533.0000650
   Web of Science ®Google Scholar
• Santagata, F., et al., 2009. Modified PATTI test for the characterization of adhesion and cohesion properties of asphalt binders. In: Proceedings of the sixth international conference on maintenance and rehabilitation of pavements and technological control. Turin.
   Google Scholar
• Schultz, J. and Nardin, M., 1994. Theories and mechanisms of adhesion. In: A. Pizzi and K.L. Mittal, eds., Handbook of adhesive technology. New York: Marcell Dekker, Inc., 19–33.
   Google Scholar
• Van Oss, C.J., Chaudhury, M.K., and Good, R.J., 1988. Interfacial Lifshitz-van der Waals and polar interactions in macroscopic systems. Chemical Reviews, 88, 927–941. doi: 10.1021/cr00088a006
   Web of Science ®Google Scholar
• Wang, H., et al., 2011. Effect of mineral filler characteristics on asphalt mastic and mixture rutting potential. Transportation Research Record: Journal of the Transportation Research Board, 2208 (1), 33–39. doi: 10.3141/2208-05
   Web of Science ®Google Scholar
• Zhang, J., et al., 2015. Influence of aggregate mineralogical composition on water resistance of aggregate–bitumen adhesion. International Journal of Adhesion and Adhesives, 62, 45–54. doi: 10.1016/j.ijadhadh.2015.06.012
   Web of Science ®Google Scholar
• Zhang, J., et al., 2017. Laboratory evaluation of Rediset modified bitumen based on rheology and adhesion properties. Construction and Building Materials, 152, 683–692. doi: 10.1016/j.conbuildmat.2017.07.037
   Web of Science ®Google Scholar