Synergic effect of waste PET and sebacic acid on the rheology of crumb rubber modified bitumen

References

• Amirkhanian, S. and Franzese, W., 2001. Establishment of an asphalt rubber technology service (ARTS). Beneficial use of recycled materials in transportation applications.
   Google Scholar
• Angelo, J.D. and Dongré, R., 2009. Practical use of multiple stress creep and recovery test. Transportation Research Record: Journal of the Transportation Research Board, 2126, 73–82. doi: 10.3141/2126-09
   Google Scholar
• Bertollo, S., et al., 2004. Mechanical properties of asphalt mixtures using recycled tire rubber produced in Brazil–A laboratory evaluation. Proceedings of the TRB annual meeting.
   Google Scholar
• Cheng, G, Shen, B., and Zhang, J., 2011. A study on the performance and storage stability of crumb rubber-modified asphalts. Petroleum Science and Technology, 29 (2), 192–200. doi:10.1080/10916460903070421.
   Web of Science ®Google Scholar
• Chion, J. and Morizur, M., 1999. Bitumen compositions and a process for their preparation. Google Patents.
   Google Scholar
• Dantas Neto, S.A., et al., 2003. Behavior of asphalt-rubber hot mixes obtained with high crumb rubber contents. Asphalt rubber 2003 conference.
   Google Scholar
• Kataware, A.V. and Singh, D., 2017. Dynamic mechanical analysis of crumb rubber modified asphalt binder containing warm mix additives. International Journal of Pavement Engineering. doi:10.1080/10298436.2017.1380806.
   Web of Science ®Google Scholar
• Kocevski, S, et al., 2012. Surface modified ground rubber tire by grafting acrylic acid for paving applications. Construction and Building Materials, 34 (3), 83–90. doi: 10.1016/j.conbuildmat.2012.02.040
   Google Scholar
• Leng, Z., Padhan, R.K., and Sreeram, A., 2018a. Production of a sustainable paving material through chemical recycling of waste PET into crumb rubber modified asphalt. Journal of Cleaner Production, 180, 682–688. doi: 10.1016/j.jclepro.2018.01.171
   Web of Science ®Google Scholar
• Leng, Z., et al., 2018b. Value-added application of waste PET based additives in bituminous mixtures containing high percentage of reclaimed asphalt pavement (RAP). Journal of Cleaner Production, 196, 615–625. doi: 10.1016/j.jclepro.2018.06.119
   Web of Science ®Google Scholar
• Little, D.N., Allen, D.H., and Bhasin, A., 2018. Chemical and mechanical processes influencing adhesion and moisture damage in hot mix asphalt pavements. In: Modeling and design of flexible pavements and materials. Cham: Springer, 123–186.
   Google Scholar
• Mull, M.A, Stuart, K., and Yehia, A., 2002. Fracture resistance characterization of chemically modified crumb rubber asphalt pavement. Journal of Materials Science, 37 (3), 557–566. doi: 10.1023/A:1013721708572
   Web of Science ®Google Scholar
• Navarro, F.J., et al., 2004. Thermo-rheological behaviour and storage stability of ground tire rubber-modified bitumens. Fuel, 83, 2041–2049. doi: 10.1016/j.fuel.2004.04.003
   Web of Science ®Google Scholar
• Padhan, R.K., et al., 2017. Performance improvement of a crumb rubber modified bitumen using polyoctenamer and cross linking agent. Road Materials and Pavement Design, 18 (4), 999–1006. doi: 10.1080/14680629.2016.1208622
   Web of Science ®Google Scholar
• Padhan, R.K., Sreeram, A., and Gupta, A., 2018. Evaluation of trans-polyoctenamer and cross-linking agents on the performance of waste polystyrene modified asphalt. Road Materials and Pavement Design, doi:10.1080/14680629.2018.1533490.
   Web of Science ®Google Scholar
• Planche, J.P. and Lacour, C., 2000. Process for the preparation of bitumen-polymer compositions containing a crosslinked elastomer and a functionalized olefinic polymer. Google Patents.
   Google Scholar
• Presti, D.L., 2013. Recycled tyre rubber modified bitumen’s for road asphalt mixtures: a literature review. Construction and Building Materials, 49, 863–881. doi: 10.1016/j.conbuildmat.2013.09.007
   Web of Science ®Google Scholar
• Samsuri, A., 1997. Properties of rubberised bitumen from reclaimed rubber. In: Proceedings of the conference on the use of rubberised bitumen in the road construction. Selangor, Malaysia, 15–23.
   Google Scholar
• Sarker, M. and Rashid, M.M., 2013. Thermal degradation of poly (ethylene terephthalate) waste soft drinks bottles and low-density polyethylene grocery bags. International Journal of Sustainable Energy and Environment, 1 (3), 78–86.
   Google Scholar
• Sreeram, A., et al., 2018. Eco-friendly paving materials using waste PET and reclaimed asphalt pavement. HKIE Transactions, 25 (4), 237–247. doi:10.1080/1023697X.2018.1534617.
   Google Scholar
• Xiao, F., Amirkhanian, S, and Juang, C.H., 2007. Rutting resistance of rubberized asphalt concrete pavements containing reclaimed asphalt pavement mixtures. Journal of Materials in Civil Engineering, 19 (6), 475–483. doi: 10.1061/(ASCE)0899-1561(2007)19:6(475)
   Web of Science ®Google Scholar
• Zhang, F. and Hu, C., 2015. Physical and rheological properties of crumb rubber/styreneebutadieneestyrene compound modified asphalts. Polymer Composites. doi:10.1002/pc.23762.
   Google Scholar