References
- Allen, R.G., Little, D.N., and Bhasin, A., 2012. Structural characterization of micromechanical properties in asphalt using atomic force microscopy. Journal of Materials in Civil Engineering, 24, 1317–1327. doi: https://doi.org/10.1061/(ASCE)MT.1943-5533.0000510
- Arifuzzaman, M., 2010. Nano-scale evaluation of moisture damage in asphalt. Doctoral dissertation. University of New Mexico, Albuquerque, NM.
- Arifuzzaman, M., Islam, M.S., and Hossain, M.I., 2017. Moisture damage evaluation in SBS and lime modified asphalt using AFM and Artificial Intelligence. Natural Computing and Applications Forum, 28, 125–134. doi: https://doi.org/10.1007/s00521-015-2041-6
- Baumgardner, G.L., et al., 2006. Polyphosphoric acid modified asphalt: proposed mechanisms. Proceedings of Association of Asphalt Paving Technologists, 74, 283–305.
- Bhasin, A., et al., 2009. Quantitative comparison of energy methods to characterize fatigue in asphalt materials. Journal of Materials in Civil Engineering, 21, 83–92. doi: https://doi.org/10.1061/(ASCE)0899-1561(2009)21:2(83)
- Bruker, 2019. Bruker AFM Probes. RTESPA-300-30, Online. Available from: https://www.brukerafmprobes.com/p-4033-rtespa-300-30.aspx [Accessed 5 May 2019].
- Bruker Manual, 2019. Bruker User Manual on PeakForce QNM Channels, Bruker’s Dimension icon. Available from: Experiment Guide> Imaging Modes> Nanomechanical Mapping> PeakForce QNM Operation> PeakForce QNM Channels [Accessed 10 September 2019].
- Caro, S., et al., 2008. Moisture susceptibility of asphalt mixtures, Part l: mechanisms. International Journal of Pavement Engineering, 9 (2), 81–98. doi: https://doi.org/10.1080/10298430701792128
- Carpenter, S.H. and Shen, S., 2006. Dissipated energy approach to study Hot-Mix asphalt healing in fatigue. Transportation Research Record: Journal of the Transportation Research Board, 1970, 178–185. doi: https://doi.org/10.1177/0361198106197000119
- Curtis, C.W., Ensley, K., and Epps, J.A., 1993. Fundamental properties of asphalt-aggregate interactions including adhesion and absorption. Publication SHRP-A-341. Washington, DC: SHRP, National Research Council.
- Dourado, E.R., Simao, R.A., and Leite, L.F.M., 2012. Mechanical properties of asphalt binders evaluated by atomic force microscopy. Journal of Microscopy, 245, 119–128. doi: https://doi.org/10.1111/j.1365-2818.2011.03552.x
- Fischer, H.R. and Dillingh, E.C., 2014. On the investigation of the bulk microstructure of bitumen – Introducing two new techniques. Fuel, 118, 365–368. doi: https://doi.org/10.1016/j.fuel.2013.11.008
- Ghuzlan, K.A., 2001. Fatigue damage analysis in asphalt concrete mixtures based Upon dissipated energy concepts. Doctoral dissertation. The University of Illinois at Urbana-Champaign, Champaign, IL.
- Ghuzlan, K.A. and Carpenter, S.H., 2006. Fatigue damage analysis in asphalt concrete mixtures using the dissipated energy approach. Canadian Journal of Civil Engineering, 33, 890–901. doi: https://doi.org/10.1139/l06-032
- Hicks, R.G., Santucci, L., and Aschenbrener, T., 2003. Moisture sensitivity of asphalt pavements. Transportation Research Board National Seminar, San Diego, CA, 37–70. https://doi.org/10.17226/21957.
- Hossain, Z., Braham, A.F., and Baumgardner, G., 2017. Effects of polyphosphoric acid on performance of asphalts. ARDOT Project Report: TRC 1501. Little Rock, AR: Arkansas Department of Transportation.
- Hossain, Z., et al., 2013. Evaluation for warm-mix additive-modified asphalt binders using spectroscopy techniques. Journal of Materials in Civil Engineering, 25, 149–159. doi: https://doi.org/10.1061/(ASCE)MT.1943-5533.0000562
- Hossain, Z., et al., 2017. Morphological and nanomechanical characterization of industrial and agricultural waste-modified asphalt binders. International Journal of Geomechanics, 17, 04016084. doi: https://doi.org/10.1061/(ASCE)GM.1943-5622.0000767
- Huang, S.-C., et al., 2005. Evaluation of different technique for adhesive properties of asphalt-Filler systems at interfacial region. Journal of ASTM International, 2, 1–15. doi: https://doi.org/10.1520/JAI12938
- Jäger, A., et al., 2004. Identification of microstructural components of bitumen by means of atomic force microscopy (AFM). Proceedings in Applied Mathematics and Mechanics, 4, 400–401. doi: https://doi.org/10.1002/pamm.200410181
- Jahangir, R., Little, D., and Bhasin, A., 2015. Evolution of asphalt binder microstructure due to tensile loading determined using AFM and image analysis techniques. International Journal of Pavement Engineering, 16, 337–349. doi: https://doi.org/10.1080/10298436.2014.942863
- Kennedy, T.W., Roberts, F.L., and Lee, K.W., 1984. Evaluating moisture susceptibility of asphalt mixtures using the texas boiling test. Transportation Research Record: Journal of Transportation Research Board, 968, 45–54.
- Kim, J., Roque, R., and Birgisson, B., 2006. Interpreting dissipated energy from complex modulus data. Journal of Road Materials and Pavement Design, 7, 223–245. doi: https://doi.org/10.1080/14680629.2006.9690034
- Little, D.N. and Jones, D.R., 2003. Chemical and mechanical processes of moisture damage in hot-mix asphalt pavements. Transportation Research Board National Seminar, San Diego, CA, 37–70.
- Loeber, L., et al., 1996. New direct observations of asphalts and asphalt binders by scanning electron microscopy and atomic force microscopy. Journal of Microscopy, 182, 32–39. doi: https://doi.org/10.1046/j.1365-2818.1996.134416.x
- Lu, Q., 2005. Investigation of conditions for moisture damage in asphalt concrete and Appropriate laboratory test methods. Doctoral dissertation. University of California, Berkeley, CA.
- Masad, E.A., et al., 2006. Characterization of HMA moisture damage using surface energy and fracture properties. Journal of the Association of Asphalt Paving Technologists, 75, 713–754.
- Masson, J.F., Leblond, V., and Margeson, J., 2006. Bitumen morphologies by phase-detection atomic force microscopy. Journal of Microscopy, 221, 17–29. doi: https://doi.org/10.1111/j.1365-2818.2006.01540.x
- Minitab 17, 2016. Statistical Software. Computer software. Arkansas State University-Jonesboro, AR. Available from: https://www.minitab.com/uploadedFiles/Documents/gettingstarted/Minitab17_GettingStarted-en.pdf.
- Nahar, S. N., et al., 2014. Quantitative nanomechanical property mapping of mitumen micro-phases by peak-force atomic force microscopy. Presented at 12th ISAP Conference on Asphalt Pavements, Raleigh, NC.
- Nicolas, N. F. and Garcia, R., 2006. Measuring phase shifts and energy dissipation with amplitude modulation atomic force microscopy. Institute of Physics Publishing, Nanotechnology, 17, S167–S172. doi: https://doi.org/10.1088/0957-4484/17/7/S11
- Rashid, F., Hossain, Z., and Bhasin, A., 2017. Nanomechanistic properties of reclaimed asphalt pavement modified asphalt binders using An atomic force microscope. International Journal of Pavement Engineering. doi:10.1080/10298436.2017.1293268.
- Santucci, L., 2010. Minimizing moisture damage in asphalt pavements. Pavement Technology Update, University of California Pavement Research Center, Transfer Program, 2, 1–12.
- Shen, S., and Carpenter, S.H., 2007. Development of an asphalt fatigue model based on energy principles. Journal of the Association of the Asphalt Paving Technologists, 76, 525–572.
- Tarefder, R.A. and Arifuzzaman, M., 2011. A study of moisture damage in plastomeric polymer modified asphalt binder using functionalized AFM tips. Journal of Systemics, Cybernetics, and Informatics, 9, 1–12.
- Van Dijk, W., 1975. Practical fatigue characterization of bituminous mixes. Proceedings of the Association of Asphalt Paving Technologists, 44, 38.
- Yao, Z., et al., 2017. Characterization of asphalt materials’ moisture susceptibility using multiple methods. Journal of Construction and Building Materials, 155, 286–295. doi: https://doi.org/10.1016/j.conbuildmat.2017.08.032
- Yu, X., Burnham, N.A., and Tao, M., 2015. Surface microstructure of bitumen characterized by atomic force microscopy. Advances in Colloid and Interface Science, 218, 17–33. doi: https://doi.org/10.1016/j.cis.2015.01.003
- Zhang, H.L., et al., 2013. Modification and its mechanism of different asphalts by polyphosphoric acid. Journal of Building Materials, 16, 255–260.
- Zhang, H.L., Wang, H.C, and Yu, J.Y., 2011. Effect of aging on morphology of organo-montmorillonite modified bitumen by atomic force microscopy. Journal of Microscopy, 242, 37–45. doi: https://doi.org/10.1111/j.1365-2818.2010.03435.x
- Zollinger, C.J., 2005. Application of surface energy measurements to evaluate moisture susceptibility of asphalt and aggregates. Doctoral dissertation. Texas A&M University, TX.