References
- 12697-26, E., 2012. Bituminous mixtures. Test methods for hot mix asphalt. Stiffness. Belgium: European Committee for Standardization Brussels.
- Akbari Nasrekani, A., et al., 2016. High-temperature performance of gilsonite-modified asphalt binder and asphalt concrete. Petroleum Science and Technology, 34 (21), 1783–1789. doi: https://doi.org/10.1080/10916466.2016.1230750
- Aliha, M. R. M., et al., 2014. Study of characteristic specification on mixed mode fracture toughness of asphalt mixtures. Construction and Building Materials, 54, 623–635. doi: https://doi.org/10.1016/j.conbuildmat.2013.12.097
- Aliha, M., et al., 2015. Effect of temperature and air void on mixed mode fracture toughness of modified asphalt mixtures. Construction and Building Materials, 95, 545–555. doi: https://doi.org/10.1016/j.conbuildmat.2015.07.165
- Ameri, M., et al., 2016. Investigation of fatigue and fracture properties of asphalt mixtures modified with carbon nanotubes. Fatigue & Fracture of Engineering Materials & Structures, 39 (7), 896–906. doi: https://doi.org/10.1111/ffe.12408
- Arámbula-Mercado, E., et al., 2018. Evaluation of recycling agent dosage selection and incorporation methods for asphalt mixtures with high RAP and RAS contents. Construction and Building Materials, 158, 432–442. doi: https://doi.org/10.1016/j.conbuildmat.2017.10.024
- ASTM, D, 2004. 3515, Standard specification for hot-mixed, hot-laid bituminous paving mixtures. In Annual book of standards, 4.
- Ayazi, M. J., Moniri, A., and Barghabany, P, 2017. Moisture susceptibility of warm mixed-reclaimed asphalt pavement containing Sasobit and Zycotherm additives. Petroleum Science and Technology, 35 (9), 890–895. doi: https://doi.org/10.1080/10916466.2017.1290655
- Bańkowski, W., et al., 2018. Design and verification of bituminous mixtures with the increased content of reclaimed asphalt pavement. ed. IOP Conference Series: Materials Science and Engineering, 012009.
- Behbahani, H., Ayazi, M. J., and Moniri, A, 2017. Laboratory investigation of rutting performance of warm mix asphalt containing high content of reclaimed asphalt pavement. Petroleum Science and Technology, 35 (15), 1556–1561. doi: https://doi.org/10.1080/10916466.2017.1316738
- Cao, W., et al., 2019. Chemical and rheological evaluation of asphalts incorporating RAP/RAS binders and warm-mix technologies in relation to crack resistance. Construction and Building Materials, 198, 256–268. doi: https://doi.org/10.1016/j.conbuildmat.2018.11.122
- Cocurullo, A., et al., 2008. Indirect tensile versus two-point bending fatigue testing. ed. Proceedings of the institution of civil engineers-transport, 207–220.
- Dinis-Almeida, M., et al., 2016. Performance of warm mix recycled asphalt containing up to 100% RAP. Construction and Building Materials, 112, 1–6. doi: https://doi.org/10.1016/j.conbuildmat.2016.02.108
- Elkashef, M., et al., 2017. Preliminary examination of soybean oil derived material as a potential rejuvenator through Superpave criteria and asphalt bitumen rheology. Construction and Building Materials, 149, 826–836. doi: https://doi.org/10.1016/j.conbuildmat.2017.05.195
- Elkashef, M., Williams, R. C., and Cochran, E, 2018. Investigation of fatigue and thermal cracking behavior of rejuvenated reclaimed asphalt pavement binders and mixtures. International Journal of Fatigue, 108, 90–95. doi: https://doi.org/10.1016/j.ijfatigue.2017.11.013
- Fattahi Amirdehi, H. R., et al., 2019. Using the generalized maximum tangential stress criterion to predict mode II fracture of hot mix asphalt in terms of mode I results – A statistical analysis. Construction and Building Materials, 213, 483–491. doi: https://doi.org/10.1016/j.conbuildmat.2019.04.067
- Haghshenas, H., et al., 2016. Research on high-rap asphalt mixtures with rejuvenators and WMA additives.
- Hajj, E. Y., Sebaaly, P. E., and Shrestha, R, 2009. Laboratory evaluation of mixes containing recycled asphalt pavement (RAP). Road Materials and Pavement Design, 10 (3), 495–517. doi: https://doi.org/10.1080/14680629.2009.9690211
- Hesami, S., et al., 2015. Laboratory investigation of moisture susceptibility of warm-mix asphalt mixtures containing steel slag aggregates. International Journal of Pavement Engineering, 16 (8), 745–759. doi: https://doi.org/10.1080/10298436.2014.953502
- Huang, B., et al., 2005. Laboratory investigation of mixing hot-mix asphalt with reclaimed asphalt pavement. Transportation Research Record: Journal of the Transportation Research Board, 1929 (1), 37–45. doi: https://doi.org/10.1177/0361198105192900105
- Huang, B., Li, G., and Shu, X, 2006. Investigation into three-layered HMA mixtures. Composites Part B: Engineering, 37 (7–8), 679–690. doi: https://doi.org/10.1016/j.compositesb.2005.08.005
- Kaseer, F., et al., 2017. Stiffness characterization of asphalt mixtures with high recycled material content and recycling agents. Transportation Research Record: Journal of the Transportation Research Board, 2633 (1), 58–68. doi: https://doi.org/10.3141/2633-08
- Kaseer, F., et al., 2018a. Performance of asphalt mixtures with high recycled materials content and recycling agents. International Journal of Pavement Engineering, 1–15. doi:10.1080/10298436.2018.1511990.
- Kaseer, F., et al., 2018b. Practical tools for optimizing recycled materials content and recycling agent dosage for improved short-and long-term performance of rejuvenated binder blends and mixtures. Asphalt Paving Technology, 87, 513–550.
- Kaseer, F., Martin, A. E., and Arámbula-Mercado, E, 2019. Use of recycling agents in asphalt mixtures with high recycled materials contents in the United States: A literature review. Construction and Building Materials, 211, 974–987. doi: https://doi.org/10.1016/j.conbuildmat.2019.03.286
- Kavussi, A., et al., 2014. Moisture susceptibility of warm mix asphalt: A statistical analysis of the laboratory testing results. Construction and Building Materials, 52 (0), 511–517. doi: https://doi.org/10.1016/j.conbuildmat.2013.10.073
- Kim, Y.-R., Zhang, J., and Ban, H, 2012. Moisture damage characterization of warm-mix asphalt mixtures based on laboratory-field evaluation. Construction and Building Materials, 31, 204–211. doi: https://doi.org/10.1016/j.conbuildmat.2011.12.085
- Korayem, A. H., et al., 2018. Rutting and fatigue performance of asphalt mixtures containing amorphous carbon as filler and binder modifier. Construction and Building Materials, 188, 905–914. doi: https://doi.org/10.1016/j.conbuildmat.2018.08.179
- Kowalski, K., et al., 2017. Thermal and fatigue evaluation of asphalt mixtures containing RAP treated with a bio-agent. Applied Sciences, 7 (3), 216. doi: https://doi.org/10.3390/app7030216
- Kuai, H., et al., 2009. Application of generalized J-integral to crack propagation modeling of asphalt concrete under repeated loading. Transportation Research Record: Journal of the Transportation Research Board, 2127, 72–81. doi: https://doi.org/10.3141/2127-09
- Martin, A. E., et al., 2015. The effects of recycling agents on asphalt mixtures with high RAS and RAP binder ratios. National cooperative highway research program phase I interim report, NCHRP, 958.
- Minhajuddin, M., Saha, G., and Biligiri, K. P, 2015. Crack propagation parametric assessment of modified asphalt mixtures using linear elastic fracture mechanics approach. Journal of Testing and Evaluation, 44 (1), 471–483.
- Moghaddam, T. B., and Baaj, H, 2016. The use of rejuvenating agents in production of recycled hot mix asphalt: A systematic review. Construction and Building Materials, 114, 805–816. doi: https://doi.org/10.1016/j.conbuildmat.2016.04.015
- Nakhaei, M., et al., 2016. Rutting and moisture resistance evaluation of polyethylene wax–modified asphalt mixtures. Petroleum Science and Technology, 34 (17-18), 1568–1573. doi: https://doi.org/10.1080/10916466.2016.1212209
- Ongel, A., and Hugener, M, 2015. Impact of rejuvenators on aging properties of bitumen. Construction and Building Materials, 94, 467–474. doi: https://doi.org/10.1016/j.conbuildmat.2015.07.030
- Purdy, C., et al., 2017. Methodology to determine optimum rejuvenator dosage for 50 percent high-rap mixture.
- Sabouri, M., Mirzaeian, D., and Moniri, A, 2018. Effectiveness of Linear Amplitude Sweep (LAS) asphalt binder test in predicting asphalt mixtures fatigue performance. Construction and Building Materials, 171, 281–290. doi: https://doi.org/10.1016/j.conbuildmat.2018.03.146
- Saha, G., and Biligiri, K. P, 2016. Fracture properties of asphalt mixtures using semi-circular bending test: a state-of-the-art review and future research. Construction and Building Materials, 105, 103–112. doi: https://doi.org/10.1016/j.conbuildmat.2015.12.046
- Saleh, M., and Nguyen, N. H, 2019. Effect of rejuvenator and mixing methods on behaviour of warm mix asphalt containing high RAP content. Construction and Building Materials, 197, 792–802. doi: https://doi.org/10.1016/j.conbuildmat.2018.11.205
- Shen, J., Amirkhanian, S., and Tang, B, 2007. Effects of rejuvenator on performance-based properties of rejuvenated asphalt binder and mixtures. Construction and Building Materials, 21 (5), 958–964. doi: https://doi.org/10.1016/j.conbuildmat.2006.03.006
- Shingles, R. A, 2014. Application of reclaimed asphalt pavement and recycled asphalt shingles in hot-mix asphalt. Citeseer.
- Shu, X., Huang, B., and Vukosavljevic, D, 2008. Laboratory evaluation of fatigue characteristics of recycled asphalt mixture. Construction and Building Materials, 22 (7), 1323–1330. doi: https://doi.org/10.1016/j.conbuildmat.2007.04.019
- Tran, N., et al., 2016. Effect of a recycling agent on the performance of high-RAP and high-RAS mixtures: field and lab experiments. Journal of Materials in Civil Engineering, 29 (1), 04016178. doi: https://doi.org/10.1061/(ASCE)MT.1943-5533.0001697
- Valdés, G., et al., 2011. Experimental study of recycled asphalt mixtures with high percentages of reclaimed asphalt pavement (RAP). Construction and Building Materials, 25 (3), 1289–1297. doi: https://doi.org/10.1016/j.conbuildmat.2010.09.016
- West, R., et al., 2009. Testing of moderate and high reclaimed asphalt pavement content mixes. Transportation Research Record: Journal of the Transportation Research Board, 2126, 100–108. doi: https://doi.org/10.3141/2126-12
- West, R. C., Willis, J. R., and Marasteanu, M. O, 2013. Improved mix design, evaluation, and materials management practices for hot mix asphalt with high reclaimed asphalt pavement content. Transportation Research Board.
- Wu, Z., et al., 2005. Fracture resistance characterization of superpave mixtures using the semi-circular bending test. Journal of ASTM International, 2 (3), 1–15. doi: https://doi.org/10.1520/JAI12264
- Xiao, F., Jordan, J., and Amirkhanian, S. N, 2009. Laboratory investigation of moisture damage in warm-mix asphalt containing moist aggregate. Transportation Research Record: Journal of the Transportation Research Board, 2126 (1), 115–124. doi: https://doi.org/10.3141/2126-14
- Xinjun, L., et al., 2008. Effect of RAP (Proportion and Type) and binder grade on the properties of asphalt mixtures. ed. 87th annual meeting of the transportation research board, 92–97.
- Ye, Q., Wu, S., and Li, N, 2009. Investigation of the dynamic and fatigue properties of fiber-modified asphalt mixtures. International Journal of Fatigue, 31 (10), 1598–1602. doi: https://doi.org/10.1016/j.ijfatigue.2009.04.008
- Yin, F., et al., 2017. Characterising the long-term rejuvenating effectiveness of recycling agents on asphalt blends and mixtures with high RAP and RAS contents. Road Materials and Pavement Design, 18 (sup4), 273–292. doi: https://doi.org/10.1080/14680629.2017.1389074
- Yu, X., et al., 2014. Rheological, microscopic, and chemical characterization of the rejuvenating effect on asphalt binders. Fuel, 135, 162–171. doi: https://doi.org/10.1016/j.fuel.2014.06.038
- Zaumanis, M., et al., 2014c. Influence of six rejuvenators on the performance properties of Reclaimed Asphalt Pavement (RAP) binder and 100% recycled asphalt mixtures. Construction and Building Materials, 71, 538–550. doi: https://doi.org/10.1016/j.conbuildmat.2014.08.073
- Zaumanis, M., et al., 2019. Determining optimum rejuvenator addition location in asphalt production plant. Construction and Building Materials, 198, 368–378. doi: https://doi.org/10.1016/j.conbuildmat.2018.11.239
- Zaumanis, M., Cavalli, M. C., and Poulikakos, L. D., 2018. Effect of rejuvenator addition location in plant on mechanical and chemical properties of RAP binder. International Journal of Pavement Engineering, 1–9. doi:10.1080/10298436.2018.1492133.
- Zaumanis, M., and Mallick, R. B, 2015. Review of very high-content reclaimed asphalt use in plant-produced pavements: state of the art. International Journal of Pavement Engineering, 16 (1), 39–55. doi: https://doi.org/10.1080/10298436.2014.893331
- Zaumanis, M., Mallick, R., and Frank, R, 2013. Evaluation of rejuvenator’s effectiveness with conventional mix testing for 100% RAP mixtures. ed. Proceedings of transportation research board 92nd annual meeting, Washington, DC.
- Zaumanis, M., Mallick, R. B., and Frank, R, 2014a. 100% recycled hot mix asphalt: A review and analysis. Resources, Conservation and Recycling, 92, 230–245. doi: https://doi.org/10.1016/j.resconrec.2014.07.007
- Zaumanis, M., Mallick, R. B., and Frank, R, 2014b. Determining optimum rejuvenator dose for asphalt recycling based on Superpave performance grade specifications. Construction and Building Materials, 69, 159–166. doi: https://doi.org/10.1016/j.conbuildmat.2014.07.035
- Zhang, D., Zhang, H., and Zhu, C, 2017. Effect of different rejuvenators on the properties of aged SBS modified asphalt. Petroleum Science and Technology, 35 (1), 72–78. doi: https://doi.org/10.1080/10916466.2016.1248772
- Zhou, Z., et al., 2016. Use of rejuvenator, styrene-butadiene rubber latex, and warm-mix asphalt technology to achieve conventional mixture performance with 50% reclaimed asphalt pavement. Transportation Research Record: Journal of the Transportation Research Board, 2575, 160–167. doi: https://doi.org/10.3141/2575-17
- Ziari, H., et al., 2016a. Investigation of rutting performance of wma mixtures containing copper slag. International Journal of Transportation Engineering, 3 (3), 227–235.
- Ziari, H., et al., 2016b. Characterization of rutting resistance of EBS-modified asphalt mixtures. Petroleum Science and Technology, 34 (13), 1107–1112. doi: https://doi.org/10.1080/10916466.2016.1181655
- Ziari, H., et al., 2017a. Evaluating the effect of amorphous carbon powder on moisture susceptibility and mechanical resistance of asphalt mixtures. Construction and Building Materials, 152, 182–191. doi: https://doi.org/10.1016/j.conbuildmat.2017.06.036
- Ziari, H., et al., 2017b. Effect of copper slag on performance of warm mix asphalt. International Journal of Pavement Engineering, 20 (7), 775–781. doi: https://doi.org/10.1080/10298436.2017.1339884
- Ziari, H., et al., 2019a. The effect of rejuvenators on the aging resistance of recycled asphalt mixtures. Construction and Building Materials, 224, 89–98. doi: https://doi.org/10.1016/j.conbuildmat.2019.06.181
- Ziari, H., et al., 2019b. Evaluation of performance properties of 50% recycled asphalt mixtures using three types of rejuvenators. Petroleum Science and Technology, 37 (23), 2355–2361. doi: https://doi.org/10.1080/10916466.2018.1550505
- Ziari, H., et al., 2020. Crack resistance of hot mix asphalt containing different percentages of reclaimed asphalt pavement and glass fiber. Construction and Building Materials, 230, 117015. doi: https://doi.org/10.1016/j.conbuildmat.2019.117015
- Ziari, H., and Moniri, A, 2019. Laboratory evaluation of the effect of synthetic Polyolefin-glass fibers on performance properties of hot mix asphalt. Construction and Building Materials, 213, 459–468. doi: https://doi.org/10.1016/j.conbuildmat.2019.04.084
- Ziari, H., Moniri, A., and Norouzi, N., 2019c. The effect of nanoclay as bitumen modifier on rutting performance of asphalt mixtures containing high content of rejuvenated reclaimed asphalt pavement. Petroleum Science and Technology, 37 (17), 1–6. doi: https://doi.org/10.1080/10916466.2018.1471489
- Ziari, H., Naghavi, M., and Imaninasab, R, 2018. Performance evaluation of rubberised asphalt mixes containing WMA additives. International Journal of Pavement Engineering, 19 (7), 623–629. doi: https://doi.org/10.1080/10298436.2016.1199874